Electrodeposition
Mostrando 13-24 de 128 artigos, teses e dissertações.
-
13. Selective Solar Surface Solar Based on Black Chromium: Influence of Electrodeposition Parameters in the Absorption of Surfaces
The search for the reduction of costs for the implementation of renewable energies implies in the optimization of the parameters of the manufacturing processes of consolidated technologies. Among these technologies are the solar collectors composed of absorber films characterized by high absorption in the spectrum range corresponding to solar radiation and l
Mat. Res.. Publicado em: 25/02/2019
-
14. Damping of Fe-Al Alloy Electrodeposited in an Ionic Liquid
Iron-Aluminium alloys were produced by the electro-deposition of iron-aluminium on a copper substrate. The electro-deposition process was done in the ionic liquid 1-butyl-1-methylpyrrolidinium trifluoromethylsulfonate, [Py1,4]TfO. A solution of (0.2 M FeCl2 + 2.75 M AlCl3)/ [Py1,4] TfO was used at a temperature of T=363 K because this mixture is solid at roo
Mat. Res.. Publicado em: 11/10/2018
-
15. Formación electroquímica de películas de polipirrol sobre Nitinol a partir de soluciones de ácido sulfosuccínico
ABSTRACT In this work the electrosynthesis of polypyrrole (PPy) on Nitinol from solutions of sulfosuccinic acid (0,25 M) and pyrrole (0,25 M) was studied. The PPy was formed potentiostatically in solutions of pH 1 and 7. As far as we know, this is the first time that the electrodeposition of PPy is carried out in the presence of sulfosuccinic acid. The morph
Matéria (Rio J.). Publicado em: 19/07/2018
-
16. Electrodeposition of Prussian Blue/Carbon Nanotube Composites at a Liquid-Liquid Interface
The iron complex hexacyanoferrate (Fe4[Fe(CN)6]3), known as Prussian Blue (PB), was electrodeposited over a free-standing carbon nanotube (CNT) film assembled at the interface between two immiscible liquids, water and 1,2-dichlorobenzene. Polarization of the interface achieved through a fixed potential or under potential variation enabled iron present inside
J. Braz. Chem. Soc.. Publicado em: 2018-05
-
17. Pulse Eletrodeposition of Ni/nano-Al2O3 Composite Coatings on Cast Iron Cylinder Liner
Ni/nano-Al2O3 composite coating by pulse electrodeposition method has been used for coating on cast iron liner material. The hardness has been increased from 308 HV to 1050 HV through conventional Watts bath and by applying Taguchi's optimization technique with optimum parameters of pulse frequency 120 Hz, duty cycle 40% and peak current density 0.7A/cm2. Th
Mat. Res.. Publicado em: 26/03/2018
-
18. The Effect of Electrolyte pH on the Ni-Co Mixed Oxides Coatings Produced from Citrate Baths
In this work, Ni-Co oxides coatings were produced using electrochemical techniques (chronopotentiometry and/or linear voltammetry) and solutions containing Ni2+ and Co2+ ions in the molar ratio 1: 2, sodium citrate as the ligand, and different pH values (7.5 and 10.5). Energy dispersive spectrometry (EDS), scanning electron microscopy (SEM), Raman spectrosco
Mat. Res.. Publicado em: 11/01/2018
-
19. Electrodeposition of Composite Coatings of Cu/AlO(OH) Using Allyl Alcohol as an Additive
In this work, composite coatings of Cu/AlO(OH) were produced by electrodeposition on steel substrates using a pyrophosphate-based bath containing allyl alcohol as an additive. The electrodeposition of the composite coatings was carried out using a 23 central composite design (CCD), aiming to verify the effects of the deposition parameters (previous stirring
Mat. Res.. Publicado em: 18/09/2017
-
20. Nickel-Copper Alloys Modified Electrodes: an Electrochemical Study on their Interfacial and Supercapacitive Properties
In this manuscript, we report the electrodeposition of nickel-copper alloys in a two steps methodology. Firstly, the copper electrode is oxidized to generate Cu2+ ions followed by the reduction of both Ni2+ and Cu2+. The electrodes were further cycled in KOH to convert the metallic alloy into the respective electroactive hydroxide. This methodology created a
J. Braz. Chem. Soc.. Publicado em: 2017-09
-
21. Electrodeposition Study of Ni Coatings on Copper from Choline Chloride-Based Deep Eutectic Solvents
Nickel was electrodeposited from choline chloride (ChCl)-based deep eutectic solvents (DESs) containing ethylene glycol (EG) and urea (U) on Cu substrate. The influence of the temperature and of DESs nature was evaluated. The diffusion coefficients of nickel varied from 2.2 × 10-9 to 3.7 × 10-8 cm2 s-1 for ChCl:2U and from 1.3 × 10-8 to 5.8 × 10-8 cm2 s-
J. Braz. Chem. Soc.. Publicado em: 2017-07
-
22. Evaluation of Co-Ni/SiC Nanocomposite Coating Obtained by Electrodeposition on the Corrosion Resistance of API 5L X80 Steel
Co-Ni/SiC nanocomposite coatings were obtained by codeposition of SiC nanoparticles in a bath with nickel and cobalt, using API 5L X80 as the substrate. The influence of cathodic current density on deposit properties was investigated. Measurements of electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization (PP) were performed in 3.5 wt%
Mat. Res.. Publicado em: 29/06/2017
-
23. Electrodeposition of Gold Films from a Glycerol Solution on Carbon Paste Electrode and the Effect of Chemical and Electrochemical Parameters of Electrodeposition on the Electrode Performance in Potassium Ferrocyanide Solution
The gold electrodeposition process from a glycerol solution on a carbon paste electrode (CPE) was investigated by voltammetry and the morphologies of the electrodeposits were analyzed by scanning electron microscopy (SEM). Voltammetric study indicated that AuCl4− was reduced to Au0 and the process was mixed controlled (mass transport and electron transfer)
J. Braz. Chem. Soc.. Publicado em: 2017-01
-
24. A Comparative Study on Ag-Doped and Surfactant Assisted MnO2 Prepared by Direct and Pulse Current Electrodeposition on Surgical Grade Stainless Steel as High-Performance Supercapacitor
Direct and pulse current electrodeposition techniques were applied for preparation of novel electro-active manganese oxides. The influences of Ag doping and addition of cetyltrimethylammonium bromide (CTAB) on electrochemical properties were discussed. The morphology and structure of the electrodes are studied by different techniques including field emission
J. Braz. Chem. Soc.. Publicado em: 2017-01