Electrochemical Treatment
Mostrando 13-24 de 160 artigos, teses e dissertações.
-
13. Removal of organic matter from pre-treated domestic sewage in anaerobic biological reactor by a combined system of electrolytic and biological aerobic treatment
Resumo Os processos biológicos são os métodos mais difundidos para o tratamento de águas residuárias. No entanto, eles têm limitações para degradar poluentes tóxicos e refratários, contaminantes, que os processos eletroquímicos podem remover. Portanto, o objetivo da pesquisa foi verificar a possibilidade de tratamento de esgoto por um processo bio
Rev. Ambient. Água. Publicado em: 22/07/2019
-
14. Continuous electrochemical reactor improved by the addition of Moringa oleífera lam extract: optimization of operational conditions for Blue 5G dye removal
Resumo Os efluentes das indústrias têxteis são conhecidos pela dificuldade de tratamento, constituindo um campo de aplicação de tecnologias alternativas para o tratamento. Neste contexto, um sistema de tratamento híbrido, composto por eletrocoagulação associada à adição de coagulante natural (extrato de sementes de Moringa oleífera lam), visa uti
Rev. Ambient. Água. Publicado em: 09/05/2019
-
15. Full Factorial Experimental Design for Carbamazepine Removal Using Electrochemical Process: a Case Study of Scheming the Pathway Degradation
Carbamazepine is an antiepileptic drug which is considered one of the persistent compounds detected in Malaysian aquatic environment. In this present study, a full factorial experimental design was applied for the analysis of effect NaCl amount, initial concentration of carbamazepine, applied voltage and treatment time on the electrochemical removal percenta
J. Braz. Chem. Soc.. Publicado em: 2018-08
-
16. Caracterización electroquímica de películas de óxido de zinc obtenidas por anodizado en medio alcalino
ABSTRACT Zinc Oxide is a material of particular interest because of its unique optical and electrical properties, which are explored for many applications in optoelectronics and nanoelectronics; and it that can be synthesized economically by the technique of anodization. In this work, the potentiostatic anodization technique was used in dilute NaOH solution,
Matéria (Rio J.). Publicado em: 19/07/2018
-
17. Efecto del tratamiento térmico sobre la resistencia mecánica, corrosión intergranular y exfoliación de la aleación de aluminio 7075
ABSTRACT In this study, the effects of heat treatments in the peak aged (T6), overaged (T73) and retrogression and reaging (RRA, retrogression at 200 °C for 10 min) on the microstructure, mechanical strength, exfoliation corrosion and intergranular corrosion of aluminum alloy 7075, has been investigated by optical microscope, scanning electron microscopy, t
Matéria (Rio J.). Publicado em: 19/07/2018
-
18. USO DE PALHA DE AÇO COMERCIAL PARA O TRATAMENTO DE EFLUENTES CONTENDO CROMO HEXAVALENTE PROVENIENTES DE PROCESSOS DE ELETROCOLORAÇÃO DE AÇOS INOXIDÁVEIS
Residual solutions containing Cr(VI) ions can be harmful to the environment as well as to human health. Hence, practical and efficient methods for the treatment of such solutions are welcome. In this note, the treatment with commercial steel wool pads of a Cr(VI) residual solution from electrochemical coloration processes of stainless steel is described in d
Quím. Nova. Publicado em: 2018-03
-
19. Heat Treatment Effects on ASTM A890/A 890M GR 5A Super Duplex Stainless Steel Passivity
Heat treatment can modify the corrosion resistance of stainless steels. Thus, the corrosion behavior of ASTM A890/A 890M GR 5A super duplex stainless steels (SDSS) has been investigated in aqueous 60,000 ppm NaCl solution by several electrochemical tests. The specimens were aged for 2, 10, 50 and 100 hours at 475 ºC. Potentiodynamic polarization studies sho
Mat. Res.. Publicado em: 22/01/2018
-
20. Influence of heat treatments on the microstructure and degree of sensitization of base metal and weld of AISI 430 stainless steel
ABSTRACT AISI 430 is a non-stabilized ferritic stainless steel grade with carbon content lower than 0.12%.After hot and cold rolling this material is annealed. The slow cooling after soaking at temperatures between 900oC and 1000oC promotes the formation of a high quantity of carbides and nitrides, while the rapid cooling partially suppresses the formation o
Matéria (Rio J.). Publicado em: 08/01/2018
-
21. TRATAMENTO ELETROQUÍMICO DE EFLUENTE DA PRODUÇÃO DE BIODIESEL USANDO UM ELETRODO DO TIPO ADE: Ti/IrO2-Nb2O5
This work presents the electrochemical treatment of wastewater of biodiesel production, using DSA based on IrO2 and Nb2O5. The anode was prepared by modified Pechini method and characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD), in order to evaluate structural and morphological properties and by electrochemical impedance spectros
Quím. Nova. Publicado em: 2018-01
-
22. Electroremediation of deactivated catalysts from fluidised catalytic cracking for vanadium removal - the effect of a dual cathode chamber reactor
Abstract The aim of this study was to evaluate the quantity of vanadium removed through electrokinetic remediation applied to catalyst waste used in a fluid catalytic cracking process. In excess, vanadium affects process efficiency by reducing the catalyst’s activity, causing deactivation and reducing its useful life in petroleum cracking during refining.
Braz. J. Chem. Eng.. Publicado em: 2018-01
-
23. Antifungal Properties of High Efficient W/WO3 Electrodes Acting under UV-Vis and Visible Light and Chloride Medium
The present work investigates the use of W/WO3 electrodes prepared by electrochemical anodization applied in the photoelectrocatalytic disinfection of Candida parapsilosis using ultraviolet-visible (UV-Vis) and visible irradiation. The core objective of this work lies in describing a novel approach involving the use of chloride as supporting electrolyte, aim
J. Braz. Chem. Soc.. Publicado em: 2017-11
-
24. Corrosion Mechanism Suggested Based on Electrochemical Analysis and SVET for Uncoated Tinplate and Post Coated With a Hybrid Film
The tinplate, used in the packaging sector and formed from a metal substrate, comprises a steel base which has undergone a surface treatment to produce a thin layer of FeSn2, a tin layer and an oxide tin layer. Currently, packaging using surface treatment is based on the use of chromates because these metals provide an excellent corrosion resistance. Nontoxi
Mat. Res.. Publicado em: 09/10/2017