Electrochemical Sensor
Mostrando 1-12 de 98 artigos, teses e dissertações.
-
1. Additive Manufacturing towards the Fabrication of Greener Electrochemical Sensors for Antioxidants
Additive manufacturing is an emerging tool that has contributed to the sustainable fabrication of devices in several areas based on the concept of “zero waste”. Considering extrusion-based manufacturing (or 3D printing), polylactic acid (PLA) has been highlighted due to its biodegradability, obtention from renewable sources, and compatibility for 3D prin
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
2. Light-Assisted Batch Injection Analysis of Glucose Exploiting a p-n-Homojunction Based on Cu2O
This work describes the development of a photoelectrochemical sensor for glucose quantification exploiting a light assisted-batch injection analysis (BIA) cell. A light-emitting diode (LED) lamp was employed to control the incidence of light on the p-Cu2O/n-Cu2O/fluorine-doped tin oxide (FTO) photoactive platform in BIA cell. The p-Cu2O/n-Cu2O/FTO platform w
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
3. Reduced Graphene Oxide/Ruthenium Oxide Hexacyanoferrate Nanocomposite for Electrochemical Determination of Ethanol in Commercial Samples
Reduced graphene oxide/ruthenium oxide hexacyanoferrate (rGO/RuOHCF) modified electrode showed synergic activity between the materials attested by the increase of electrochemical current and stability. The preparation of the nanocomposite was made by a simple two-step electrochemical approach. The material structure was characterized by spectroscopic techniq
J. Braz. Chem. Soc.. Publicado em: 2021-06
-
4. Individuals with untreated psychiatric disorders and suicide in the COVID-19 era
Reduced graphene oxide/ruthenium oxide hexacyanoferrate (rGO/RuOHCF) modified electrode showed synergic activity between the materials attested by the increase of electrochemical current and stability. The preparation of the nanocomposite was made by a simple two-step electrochemical approach. The material structure was characterized by spectroscopic techniq
Braz. J. Psychiatry. Publicado em: 2021-06
-
5. Increased depression and anxiety during the COVID-19 pandemic in Brazilian mothers: a longitudinal study
Reduced graphene oxide/ruthenium oxide hexacyanoferrate (rGO/RuOHCF) modified electrode showed synergic activity between the materials attested by the increase of electrochemical current and stability. The preparation of the nanocomposite was made by a simple two-step electrochemical approach. The material structure was characterized by spectroscopic techniq
Braz. J. Psychiatry. Publicado em: 2021-06
-
6. Device for Streptavidin Detection Using LSPR and Electrochemical Transductions on the same Platform
Research in biosensing currently occupies an important role among biomolecular detection techniques, especially with respect to medical diagnoses. Is this sense, the development of biosensors based on the localized surface plasmon resonance (an optical transducer) or electrochemical transductions have been highlighted. However, optical and electrochemical de
J. Braz. Chem. Soc.. Publicado em: 2021-04
-
7. Molecularly Imprinted Polypyrrole on Glassy Carbon Electrode Modified with Reduced Graphene Oxide and Gold Nanoparticles for Isoamyl Alcohol Analysis in Fusel Oil
A molecularly imprinted electrochemical sensor for determination of isoamyl alcohol was successfully constructed by modifying the glassy carbon electrode (GCE) with gold nanoparticles (AuNPs) and reduced graphene oxide (RGO). The modification of the GCE increased the electron transfer rate and the electrode surface area, which, consequently, made more room a
J. Braz. Chem. Soc.. Publicado em: 2021-02
-
8. AN APPROACH BASED ON ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY TO STUDY THE GLYCEROL/BIODIESEL GRAVITY SEPARATION
In this study, electrochemical impedance spectroscopy (EIS) is evaluated as a novel application in the biodiesel purification process. EIS is proposed as a tool to study the behavior of charge carriers produced from side reactions or dissociations of some impurities during the gravitational separation of glycerol dispersed in crude biodiesel after the transe
Quím. Nova. Publicado em: 2020-12
-
9. Tópicos Emergentes em Insuficiência Cardíaca: Terapias Intervencionistas na Insuficiência Cardíaca
In this paper a novel supramolecular strategy to improve the efficiency of a voltammetric sensor to determine two biologically relevant molecules (epinephrine (EP) and uric acid (UA)) is presented. The strategy is based on the use of a glassy carbon electrode modified with a copper(II) complex ([Cu(H2dimpy)Cl]PF6) adsorbed on multi-walled carbon nanotubes (M
Arq. Bras. Cardiol.. Publicado em: 2020-11
-
10. Synergistic Supramolecular Effect on the Electro-Oxidation of Biological Relevant Molecules: A Novel Sensor for Simultaneous Determination of Epinephrine and Uric Acid in Human Urine Using MWCNT and a Copper(II) Complex
In this paper a novel supramolecular strategy to improve the efficiency of a voltammetric sensor to determine two biologically relevant molecules (epinephrine (EP) and uric acid (UA)) is presented. The strategy is based on the use of a glassy carbon electrode modified with a copper(II) complex ([Cu(H2dimpy)Cl]PF6) adsorbed on multi-walled carbon nanotubes (M
J. Braz. Chem. Soc.. Publicado em: 2020-11
-
11. Synthesis, Characterization, Spectroelectrochemical, Photophysical and HSA-Binding Properties of Novel and Versatile meso-Tetra(4-pyridylvinylphenyl)porphyrins Coordinated to Ruthenium(II)-Polypyridyl Derivatives
The free-base meso-tetra(4-pyridylvinylphenyl)porphyrin (1a) and its zinc(II) complex were synthesized and then functionalized with [Ru(bpy)2Cl]+ units (2a and 2b) via conventional methods and evaluated in terms of photophysical, electrochemical and biological aspects. All porphyrins present moderate singlet oxygen production and fluorescence quantum yield,
J. Braz. Chem. Soc.. Publicado em: 2020-11
-
12. Gold Nanoparticle/Tetrapyridylporphyrin Hybrid Material: Spectroscopic and Electrocatalytic Properties and Sensor Application
An electrocatalytic active hybrid material prepared by successive stepwise coordinative deposition of 20 nm diameter gold nanoparticles (AuNP) with 5,10,15,20-tetra(4-pyridyl)-21H,23H-porphine (TPyP) on fluorine-doped tin oxide (FTO) substrates previously modified with 3-mercaptopropylsilane is described. Their interaction and assembly were studied by UV-Vis
J. Braz. Chem. Soc.. Publicado em: 2020-11