Electrochemical Kinetics
Mostrando 1-12 de 63 artigos, teses e dissertações.
-
1. Gold Nanoparticle/Tetrapyridylporphyrin Hybrid Material: Spectroscopic and Electrocatalytic Properties and Sensor Application
An electrocatalytic active hybrid material prepared by successive stepwise coordinative deposition of 20 nm diameter gold nanoparticles (AuNP) with 5,10,15,20-tetra(4-pyridyl)-21H,23H-porphine (TPyP) on fluorine-doped tin oxide (FTO) substrates previously modified with 3-mercaptopropylsilane is described. Their interaction and assembly were studied by UV-Vis
J. Braz. Chem. Soc.. Publicado em: 2020-11
-
2. Ações contra a Covid-19 na População com Síndrome de Down
An electrocatalytic active hybrid material prepared by successive stepwise coordinative deposition of 20 nm diameter gold nanoparticles (AuNP) with 5,10,15,20-tetra(4-pyridyl)-21H,23H-porphine (TPyP) on fluorine-doped tin oxide (FTO) substrates previously modified with 3-mercaptopropylsilane is described. Their interaction and assembly were studied by UV-Vis
Arq. Bras. Cardiol.. Publicado em: 2020-11
-
3. ELECTROCHEMICAL INCINERATION OF SHORT-CHAIN CARBOXYLIC ACIDS WITH NB‑SUPPORTED BORON DOPED DIAMOND ANODE: SUPPORTING ELECTROLYTE EFFECT INTO THE ELECTROGENERATED OXIDANT SPECIES (HYDROXYL RADICALS, HYDROGEN PEROXIDE AND PERSULFATE)
This work describes the electrochemical oxidation study of three short chain carboxylic acids (acetic, oxalic and formic 0.18 mol L-1) using different electrolysis conditions (electrolyte composition and current density) in an electrochemical reactor fitted with niobiumsupported/BDD electrode (Nb/BBD) as anode and titanium plate as cathode. The experiments w
Quím. Nova. Publicado em: 2020-03
-
4. ANALYTICAL EXPRESSIONS FOR THE CONCENTRATION AND CURRENT IN THE REDUCTION OF HYDROGEN PEROXIDE AT A METAL-DISPERSED CONDUCTING POLYMER FILM
A mathematical model describing the reduction of Hydrogen peroxide (H2O2) to water in a metal dispersed conducting polymer film is discussed. The model is based on a system of reaction-diffusion equations containing a non-linear term related to Michaelis-Menten kinetics of the enzymatic reaction. The approximate analytical expressions corresponding to the co
Quím. Nova. Publicado em: 2020-01
-
5. Square-Wave Voltammetry Determination of Ciprofloxacin in Pharmaceutical Formulations and Milk Using a Reduced Graphene Oxide Sensor
In this paper, a simple, sensitive and precise electroanalytical method was developed using a chemically-reduced graphene-oxide (CRGO)-modified glassy carbon electrode and square wave voltammetry (SWV) for determination of ciprofloxacin in pharmaceutical formulations (tablets) and milk samples. Advantages of this sensor include a potential displacement of 10
J. Braz. Chem. Soc.. Publicado em: 16/09/2019
-
6. Influence of Electrooxidation of Ni Wire Electrodes on the Kinetics of Oxygen Evolution Reaction Studied in 0.1 mol dm-3 NaOH
This work reports on oxygen evolution reaction (OER), studied at nickel wire electrode material. Electrocatalytic behavior of non-oxidized and electrooxidized Ni wire samples was evaluated in 0.1 mol dm-3 NaOH solution for the potential range: 1600-2000 mV vs. RHE. The performance of nickel electrodes was examined by alternating current (a.c.) impedance spec
J. Braz. Chem. Soc.. Publicado em: 2019-02
-
7. Characterization of Niobia-alumina Deposited by the Sol-gel Process on Carbon Steel
The precursor sols of Al2O3 and mixed NbxOy/Al2O3 oxides were synthesized by the sol-gel process using acetylacetone to control the reaction kinetics of the organometallic oxides in the mixture. The layers of the precursor sols of Al2O3 and NbxOy/Al2O3 were deposited on AISI steel 1020 by manual immersion (dip coating). The lyophilized sols were characterize
Mat. Res.. Publicado em: 16/04/2018
-
8. Anodic Oxidation of Sulfide to Sulfate: Effect of the Current Density on the Process Kinetics
The kinetics of the conversion of sulfide to sulfate by electro-oxidation, using a boron-doped diamond (BDD) electrode was studied. Different applied current densities were tested, from 10 to 60 mA cm-2. The results showed that the electrochemical conversion of sulfide to sulfate occurs in steps, via intermediate production of other sulfur species. The oxida
J. Braz. Chem. Soc.. Publicado em: 2017-04
-
9. Development of Three-Dimensional Electrodes of PbO2 Electrodeposited on Reticulated Vitreous Carbon for Organic Eletrooxidation
The application of electrochemical technology for the degradation of organic pollutants often faces two main problems, related to the anode material and mass transport limitations. Although PbO2 electrode is inexpensive and provides satisfactory electrooxidation kinetics, in the form of plane electrodes it is unable to resolve the mass transfer problem that
J. Braz. Chem. Soc.. Publicado em: 2017-01
-
10. MATHEMATICAL MODELING OF THE ELECTRIC CURRENT GENERATION IN A MICROBIAL FUEL CELL INOCULATED WITH MARINE SEDIMENT
Abstract Microbial fuel cells (MFC) are electrochemical devices that utilize the ability of some microorganisms to oxidize organic matter and transfer electrons resulting from their metabolism to an insoluble acceptor. The goal of the present study was to model the kinetics of electrical current generation from an MFC inoculated with marine sediment. For thi
Braz. J. Chem. Eng.. Publicado em: 2017-01
-
11. Influence of Deleterious Phases Precipitation in the Corrosion Resistance Measured by Double Loop Electrochemical Polarization Reactivation Test in Superduplex Stainless Steel
This work investigates the influence of deleterious phases precipitation on the corrosion resistance of two wrought superduplex stainless steels UNS S32750 with similar composition, but different grain sizes. Isothermal treatments were carried out to introduce different amounts of deleterious phases, such as chi (χ), sigma (σ) and secondary austenite (γ2)
Mat. Res.. Publicado em: 2015-08
-
12. Electrochemical Oxidation of Landfill Leachate: Investigation of Operational Parameters and Kinetics Using Graphite-PVC Composite Electrode as Anode
The preparation of a new carbon composite electrode constructed from graphite-polyvinyl chloride (graphite-PVC) compressed mixtures was used for the first time to treat landfill leachate in Malaysia under electrochemical oxidation. The electrochemical oxidation of landfill leachate was studied on graphite-PVC and Pt electrodes as anode and cathode, respectiv
J. Braz. Chem. Soc.. Publicado em: 2015-05