Electrochemical Degradation
Mostrando 1-12 de 93 artigos, teses e dissertações.
-
1. Comparative Study of Degradation of Reactive Dyes and Decolorization and Detoxification in Aqueous Solution Applying DyP Peroxidases Isolated from Saccharomonospora viridis (SviDyP) and Thermobifida fusca (TfuDyp)
The wastewater that originates from the widespread usage of synthetic dyes in the industry have become a severe environmental problem. Several efforts have been made to develop new types of treatment which are capable of performing the degradation of the dyes from the environment. Within this scope, much attention has been drawn to enzymatic approaches, main
J. Braz. Chem. Soc.. Publicado em: 2021-06
-
2. ELECTROCHEMICAL INCINERATION OF SHORT-CHAIN CARBOXYLIC ACIDS WITH NB‑SUPPORTED BORON DOPED DIAMOND ANODE: SUPPORTING ELECTROLYTE EFFECT INTO THE ELECTROGENERATED OXIDANT SPECIES (HYDROXYL RADICALS, HYDROGEN PEROXIDE AND PERSULFATE)
This work describes the electrochemical oxidation study of three short chain carboxylic acids (acetic, oxalic and formic 0.18 mol L-1) using different electrolysis conditions (electrolyte composition and current density) in an electrochemical reactor fitted with niobiumsupported/BDD electrode (Nb/BBD) as anode and titanium plate as cathode. The experiments w
Quím. Nova. Publicado em: 2020-03
-
3. Desgaste y corrosión de recubrimientos de PLGA sobre titanio en contacto con hueso y fluido sinovial
ABSTRACT In this work, the synergism between wear and corrosion was evaluated in titanium specimens covered by PLGA. The tests were carried out in a tribocorrosion machine, taking into account two variables: scratch ve-locity and applied load. A bipotentiostat was adapted to obtain the potentiostatic curves and Tafel in resting, moving and wear-corrosion con
Matéria (Rio J.). Publicado em: 16/09/2019
-
4. Full Factorial Experimental Design for Carbamazepine Removal Using Electrochemical Process: a Case Study of Scheming the Pathway Degradation
Carbamazepine is an antiepileptic drug which is considered one of the persistent compounds detected in Malaysian aquatic environment. In this present study, a full factorial experimental design was applied for the analysis of effect NaCl amount, initial concentration of carbamazepine, applied voltage and treatment time on the electrochemical removal percenta
J. Braz. Chem. Soc.. Publicado em: 2018-08
-
5. Electrochemical corrosion characterization of nickel aluminides in acid rain
ABSTRACT Nickel aluminides have been extensively studied in recent decades to replace superalloys, in some components of aircraft turbines, because they have excellent corrosion resistance. Many industrial cities have the problem of air pollution, which has forced the study of the degradation of these alloys in the presence of acid rain. The aim of this work
Matéria (Rio J.). Publicado em: 19/07/2018
-
6. Nondestructive Microstructural Characterization of Superduplex Stainless Steel by Double Loop Electrochemical Polarization Reactivation Portable Test
Superduplex stainless steels (SDSS) are frequently employed in the petrochemical industries where is required high mechanical strength, toughness, and corrosion resistance. However, these properties can be affected by deleterious phases formation due thermomechanical processes applied in the field during pipes and vessels construction. This work propose the
Mat. Res.. Publicado em: 23/10/2017
-
7. Influence of Supporting Electrolytes on RO 16 Dye Electrochemical Oxidation Using Boron Doped Diamond Electrodes
The influence of different supporting electrolytes as well as of different current densities on RO16 dye electrochemical oxidation using BDD electrodes has been systematically studied. The RO16 azo-dye electrooxidation experiments were performed at different current densities and three different supporting electrolytes: H2SO4 0.1 mol L-1, HClO4 0.1 mol L-1 a
Mat. Res.. Publicado em: 13/03/2017
-
8. Tribocorrosion and Electrochemical Behavior of DIN 1.4110 Martensitic Stainless Steels After Cryogenic Heat Treatment
DIN 1.4110 martensitic stainless steel is largely used in the cutlery industry due to its high corrosion resistance associated with high mechanical resistance. However, when this material works under corrosion and wear conditions at the same time, their synergistic effect can accelerate the degradation process of the alloy. Cryogenic heat treatments have bee
Mat. Res.. Publicado em: 23/02/2017
-
9. Development of Three-Dimensional Electrodes of PbO2 Electrodeposited on Reticulated Vitreous Carbon for Organic Eletrooxidation
The application of electrochemical technology for the degradation of organic pollutants often faces two main problems, related to the anode material and mass transport limitations. Although PbO2 electrode is inexpensive and provides satisfactory electrooxidation kinetics, in the form of plane electrodes it is unable to resolve the mass transfer problem that
J. Braz. Chem. Soc.. Publicado em: 2017-01
-
10. OXIDAÇÃO ELETROQUÍMICA DOS CORANTES REATIVOS PRETO 5 E AZUL 19 UTILIZANDO UM ELETRODO DE DIAMANTE DOPADO COM BORO NÃO COMERCIAL
We have studied the treatment of Reactive Black 5 (RP5) and Blue 19 (RA19), which are respectively azo and anthraquinone textile dyes, by electrochemical oxidation using a non commercial boron doped diamond electrode supported on titanium metallic with a relation between B and C equal to 15,000 ppm. Pt was used as counter electrode and Ag/AgCl(sat) was the r
Quím. Nova. Publicado em: 2016-11
-
11. Biofuncionalización de Ti6Al4V mediante crecimiento de nanoestructuras de TiO 2 con contenido de calcio y fósforo
ABSTRACT In this work the effect of the electrodeposition of calcium phosphate on TiO2 nanostructures was evaluated. For that, TiO2 nanostructures were developed in a solution of NH4F and NH4H2PO4 on Ti6Al4V substrates and subsequent cathodic electrodeposition was performed using Ca(NO3)2 and (NH4)2HPO4 as electrolyte. The surface morphology was observed by
Matéria (Rio J.). Publicado em: 2016-09
-
12. MATERIAIS DE COMPOSIÇÃO TI/PBXTI1-XO2 PARA DEGRADAÇÃO ELETROQUÍMICA FOTO-ASSISTIDA DE POLUENTES ORGÂNICOS
Electrochemical methods are an interesting and clean alternative for the abatement of toxic organic pollutants. This paper details the study of the synthesis of electrode materials of nominal composition Ti/PbXTi1-XO2 (X = 0; 0.05; 0.10; 0.20 e 0.30) and their use as electrodes for degradation of organic pollutants using both electrochemical and photo-assist
Quím. Nova. Publicado em: 2016-06