Electrical Resistivity Method
Mostrando 1-12 de 32 artigos, teses e dissertações.
-
1. Ferrimagnetic to paramagnetic transition and dielectric relaxation in Ni1-xZnxFe2O4 ferrites
Abstract The spinel ferrite system Ni1-xZnxFe2O4 (x=0-0.7, Δx=0.1) was prepared by wet chemical co-precipitation method using sulfates of respective metal ions. The electrical resistivity and dielectric properties of the prepared samples have been studied as a function of temperature, frequency, and Zn content (x). The DC resistivity (ϱ) was measured in th
Cerâmica. Publicado em: 2021-06
-
2. Characterization of Sobradinho landslide in fluvial valley using MASW and ERT methods
Abstract Landslides can substantially impact the fluvial systems, which is why the continuous mapping of their extent, evolution and stability assessment is crucial. However, in such environments, material identification (e.g. colluvium) and subsurface characterization by the methods used for geologic mapping and geotechnical investigation is often a challen
REM, Int. Eng. J.. Publicado em: 2020-12
-
3. Detection of seepage paths in small earth dams using the self-potential method (SP)
Abstract The application of geoelectric methods, such as induced polarization (IP), the electrical resistivity and the self-potential (SP), presents an important indirect study methodology in several areas of geology, such as mining, geotechnics and environmental geology. The present study deals with the results of the application of the self-potential metho
REM, Int. Eng. J.. Publicado em: 2020-09
-
4. Y3+ substituted Sr-hexaferrites: sol-gel synthesis, structural, magnetic and electrical characterization
Resumo Hexaferritas de estrôncio com adição de Y3+ com composição química SrYxFe12-xO19 (x= 0,0, 0,5, 1,0, 1,5) foram sintetizadas com sucesso pelo método sol-gel com autocombustão. Os estudos estruturais e morfológicos das amostras preparadas foram investigados usando a técnica de difração de raios X, espectroscopia de energia dispersiva, micros
Cerâmica. Publicado em: 06/06/2019
-
5. Effect of Preparation Method on the Electrical and Mechanical Properties of PVC/Carbon Nanotubes Nanocomposites
The biggest challenge for the development of carbon nanotubes polymeric nanocomposites is in the suitable dispersion and distribution of the nanometric particles along the polymer matrix. Several preparation methods have been used to obtain nanocomposites, highlighting the mixture with polymer solution followed by solvent evaporation and the hot compacting.
Mat. Res.. Publicado em: 02/08/2018
-
6. Kinetics of Vacancy Doping in SrTiO3 Studied by in situ Electrical Resistivity
The kinetics of annealing to transform stoichiometric SrTiO3 insulator into a vacancy-doped semiconductor-superconductor was revisited by in situ electrical resistivity measurements. SrTiO3 single crystals were grown by Floating Zone Method. Using a homemade apparatus several electrical resistivity as a function of time were measured at different temperature
Mat. Res.. Publicado em: 03/05/2018
-
7. Transport Properties of Polycrystalline Mixed Copper-Zinc Ferrites
Polycrystalline mixed Cu-Zn spinel ferrites with general formula Cu1-xZnxFe2O4 (x = 0.0, 0.1, 0.3, 0.5 and 0.7) have been prepared by solid-state reaction method. The effect of Zn2+ ions on transport properties such as DC and AC resistivity, dielectric constant and dielectric loss tangent has been presented in this paper. The resistivity increases with Zn co
Mat. Res.. Publicado em: 19/04/2018
-
8. Resistivity Reduction of Nanostructured Undoped Zinc Oxide thin Films for Ag/ZnO Bilayers Using APCVD and Sputtering Techniques
Nanostructured undoped zinc oxide (ZnO) thin films were deposited using atmospheric pressure chemical vapor deposition (APCVD) on glass substrates using zinc acetate dehydrate [C4H6O4Zn·2H2O, ZnAc] in less than 2 minutes for each sample. In order to reduce the resistivity of ZnO films, a very thin layer of Ag was deposited on top of the films via the sputte
Mat. Res.. Publicado em: 15/03/2018
-
9. Incorporation of Lead Containing TV Tube Glass Waste in Aluminous Porcelain
The aim of this work was to study the incorporation of lead containing TV tube glass waste as a method to provide alternative raw material for aluminous electrical porcelain. For this purpose, aluminous porcelain formulations containing up to 30 wt.% of TV tube glass waste as a replacement for traditional flux material (sodium feldspar) were pressed and fire
Mat. Res.. Publicado em: 21/09/2017
-
10. Design of coaxial aircell fixture for the measurement of electromagnetic properties
Abstract Coaxial aircells are designed and fabricated to measure the electromagnetic properties of ferrite materials in the frequency range from 1 MHz to 3.6 GHz. These S-parameters are actually measured connecting the aircell to a vector network analyzer (VNA). The electromagnetic properties such as complex permittivity and complex permeability are extracte
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2017-09
-
11. Geophysical investigation of earth dam using the electrical tomography resistivity technique
Abstract Dams are structures that dam rivers and streams for a variety of purposes. These structures often need to be sturdy to withstand the force of the impoundment and the high values of accumulated water load. The constant maintenance of these structures is essential, since a possible accident can lead to damage of catastrophic proportions. This research
REM, Int. Eng. J.. Publicado em: 2017-03
-
12. Geophysical modeling in gold deposit through DC Resistivity and Induced Polarization methods
Abstract Ore mining fundamentally depends on the definition of its tenor and volume, something extremely complex in disseminated mineralization, as in the case of certain types of deposits of gold and sulfites. This article proposes the use of electrical tomography for definition of a geophysical signature in terms of electrical resistivity and chargeability
REM, Int. Eng. J.. Publicado em: 2016-09