Electrical Machine
Mostrando 1-12 de 43 artigos, teses e dissertações.
-
1. Equipment for Monitoring Synchronous Generators Condition through External Magnetic Field Waveforms
Abstract This paper presents an equipment for monitoring synchronous generators condition through characteristics of the time derivative of the external magnetic field. The developed monitoring methodology allows the identification of established or incipient faults, by detecting changes in the magnetic signature of the synchronous generator. In this methodo
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
2. Nitretação por descargas elétricas da liga Ti-6Al-4V com adição de pó abrasivo SiC ao fluido dielétrico
RESUMO O processo de nitretação que usa Usinagem por Descargas Elétricas é um método que associa a capacidade de usinar superfícies complexas com a obtenção de tratamento termoquímico de nitretação. A fonte de nitrogênio é proveniente da uréia, que compõe o fluido dielétrico juntamente com água deionizada. A liga de titânio Ti-6Al-4V possui
Matéria (Rio J.). Publicado em: 16/09/2019
-
3. Controller for a SPS machine: a proposal PI control
ABSTRACT Temperature control is the key to effective sintering process for metal, ceramic and polymer powders. The original control temperature provides an irregular control operation process which affects the material properties due to the spacer involved in it. Furthermore, it is analyzed how the material responds to an electrical input determining a model
Matéria (Rio J.). Publicado em: 19/07/2018
-
4. Método innovador de ensayos de impacto en altas temperaturas aplicado en aceros al carbono
ABSTRACT In this paper, an innovative method of impact tests at high temperature on sub-size Charpy V notched specimens is applied. The innovation lies in the method of heating the specimen, which is performed in situ on a Charpy impact machine type by alternating electrical current through the specimen. The specimens are heated in a few seconds (v=32 ºC/s)
Matéria (Rio J.). Publicado em: 19/07/2018
-
5. HARVESTING FRUITS USING A MOBILE PLATFORM: A CASE STUDY APPLIED TO CITRUS
ABSTRACT Harvesting fruits and vegetables has been a challenge. Mobile platforms for harvesting vegetables and fruits have been used, but with some limitations, such as their applicability for a certain time of the year and for a specific crop. A mobile platform was initially developed for harvesting fresh market tomatoes, mainly staked in Brazil. However, a
Eng. Agríc.. Publicado em: 2018-04
-
6. Influence of a cold deformation process by drawing on the electrical properties of copper wires
Abstract This article presents a study of the drawing, deformation, hardening and heat treatment of copper wire, in order to investigate the influence of combinations of operating variables (annealing factor, oil emulsion temperature and machine speed) during the drawing process on the electrical conductivity of copper wires. The results showed that when the
REM, Int. Eng. J.. Publicado em: 2017-03
-
7. Influência do tipo de medição na determinação do módulo estático de elasticidade do concreto / Influence of Type of Measurement in Determining the Static Module of Elasticity of Concrete
The knowledge of the compressive strength and static modulus of elasticity is fundamental to the study of deformations of concrete, since deformations can cause cracks that compromise both the structural behavior of the element and serve as an entry to deleterious agents. For purposes of correlating values of compressive strength and static modulus of elasti
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 15/08/2011
-
8. Improved capacity of eccentric mechanical presses existing in Brazilian industry / Melhoria na capacidade de produção das prensas mecânicas excêntricas existentes na indústria brasileira
This work defines a methodology to improve the production capacity of the mechanical presses existing in the Brazilian industry. The eccentric mechanical presses with crank drive (connecting rod) are very simple machines for operation, but these presses use a lot of energy during the working cycle, partially due the fixed descent and rising speeds of the sli
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 22/02/2011
-
9. Algoritmo para frenagem regenerativa de uma máquina síncrona de imã permanente / Algorithm for regenerative braking of a permanent magnet synchronous machine
Environmental protection and optimal energy resources are great activity research areas. As a result of these researches, electric vehicles (EVs) and hybrid (HEV) developments have been accelerated. They have challenging problems such as low autonomy, power conversion, vehicle control, energy management and distribution within it, as well as the esthetic and
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 02/08/2010
-
10. Um estudo sobre a máquina Torus
Este trabalho apresenta as características básicas de uma máquina elétrica com fluxo axial, ímãs permanentes, rotor duplo e estator com enrolamentos toroidais montado entre os rotores. A máquina foi construída no Laboratório de Máquinas Elétricas, Acionamentos e Energia da Escola de Engenharia da UFRGS. O trabalho contém modelos analíticos para
Publicado em: 2010
-
11. Classificação de sinais de eletroencefalograma usando máquinas de vetores suporte
Electroencephalogram (EEG) is a clinical method widely used to study brain function and neurological disorders. The EEG is a temporal data series which records the electrical activity of the brain. The EEG monitoring systems create a huge amount of data; with this fact a visual analysis of the EEG is not feasible. Because of this, there is a strong demand fo
Publicado em: 2009
-
12. Avaliação dos Impactos da Impedância de Falta e da Geração Distribuída em Estudos de Afundamentos de Tensão / Impact Assessment of Fault Impedance and Distributed Generation Studies of Voltage Sags
This work presents an impact analysis of the fault impedance and distributed ge- neration on the amplitude and annual average quantity of voltage sags in sensitive end-users. Phase-to-ground solid and non-solid faults were simulated in 62 transmission lines at 230, 138, 69 and 13.8 kV, which made part of the electrical system of the municipality of Goiânia,
Publicado em: 2009