Electric Resistance
Mostrando 1-12 de 125 artigos, teses e dissertações.
-
1. Safety and Results of Bioelectrical Impedance Analysis in Patients with Cardiac Implantable Electronic Devices
Abstract Objective: To analyze the dual interference between cardiac implantable electronic devices (CIEDs) and bioelectrical impedance analysis (BIA). Methods: Forty-three individuals admitted for CIEDs implantation were submitted to a tetrapolar BIA with an alternating current at 800 microA and 50 kHz frequency before and after the devices’ implantati
Braz. J. Cardiovasc. Surg.. Publicado em: 2020-04
-
2. Safety and Results of Bioelectrical Impedance Analysis in Patients with Cardiac Implantable Electronic Devices
Abstract Objective: To analyze the dual interference between cardiac implantable electronic devices (CIEDs) and bioelectrical impedance analysis (BIA). Methods: Forty-three individuals admitted for CIEDs implantation were submitted to a tetrapolar BIA with an alternating current at 800 microA and 50 kHz frequency before and after the devices’ implantati
Braz. J. Cardiovasc. Surg.. Publicado em: 07/11/2019
-
3. Acid Hydrolysis of Regular Corn Starch under External Electric Field
The main objective of the present work is the investigation of a new method for starch hydrolysis. For this, we proposed the acid hydrolysis under the action of an external electric field, able to develop a faster reaction than the conventional one. Corn starch with 18% amylose was subjected to a fixed voltage, varying the external electric field application
J. Braz. Chem. Soc.. Publicado em: 24/10/2019
-
4. Influence of social stress on value of minimal anesthetic concentration of isuflurano in guan (Penelope obscura) captured in wildlife
RESUMO: Este estudo teve como objetivo determinar e avaliar se há diferença nos valores de CAM em jacus (Penelope obscura) capturados em vida livre e submetidos a diferentes condições de estresse social. Foram utilizadas 27 aves da espécie jacu (P. obscura) de vida livre, que depois de capturados foram alocados em dois grupos: 10 animais que permanecera
Pesq. Vet. Bras.. Publicado em: 14/10/2019
-
5. Nitretação por descargas elétricas da liga Ti-6Al-4V com adição de pó abrasivo SiC ao fluido dielétrico
RESUMO O processo de nitretação que usa Usinagem por Descargas Elétricas é um método que associa a capacidade de usinar superfícies complexas com a obtenção de tratamento termoquímico de nitretação. A fonte de nitrogênio é proveniente da uréia, que compõe o fluido dielétrico juntamente com água deionizada. A liga de titânio Ti-6Al-4V possui
Matéria (Rio J.). Publicado em: 16/09/2019
-
6. Effect of Electric Pulse Treatment on the Corrosion Resistance of HAl52-2 Aluminum Brass
In this work, the effects of electric pulse treatment (EPT) on the corrosion resistance of HAl52-2 aluminum brass has been investigated using electrochemical workstation, scanning electron microscope and X-ray diffraction. The results have shown that after EPT, the corrosion potential increased and the corrosion current density decreased. At the same time, t
Mat. Res.. Publicado em: 19/08/2019
-
7. HYBRID SOLAR HEAT PUMP SYSTEM FOR WATER HEATING
ABSTRACT A comparative test of water heating between the hybrid system - solar collector with heat pump - and a system with conventional supplementary heating - with high electric power - was performed. For this, a small capacity heat pump was installed, which was later installed together with a solar heating system, composed of a 250 L thermal reservoir and
Eng. Agríc.. Publicado em: 12/08/2019
-
8. Avaliação do chá branco como potencial inibidor de corrosão
RESUMO O trabalho apresenta avaliação do extrato alcoólico do chá branco como potencial inibidor de corrosão para o aço carbono P110 na presença de ácido clorídrico 1 mol.L-1. Os inibidores de corrosão destacam-se na proteção de peças metálicas em ambientes ácidos, sendo que muitas das substâncias presentes na composição de inibidores comer
Matéria (Rio J.). Publicado em: 20/05/2019
-
9. Efecto de los parámetros de soldadura en mallas de acero electrosoldadas
ABSTRACT Reinforced concrete is the most widely used material in construction industry. Generally concrete is reinforced with ribbed bars. In certain applications, it is desirable to use welded mesh and are used in most reinforced concrete structures (buildings, roads, tunnels and prefabricated components). Welded mesh are generally electrowelded (PW: Projec
Matéria (Rio J.). Publicado em: 19/07/2018
-
10. Application of methodology for the adequacy of the electrical motor's power sizing: permanent and transient analysis
Abstract The suitability of the motive force contributes to the efficient use of electrical energy. On the other hand, the inadequate size of electric motors is directly connected to increased investment and running costs. This article presents the theory and mainly the application of a methodology for the adequacy of the motive power. The research was condu
REM, Int. Eng. J.. Publicado em: 2018-04
-
11. Fasting: a major limitation for resistance exercise training effects in rodents
Protocols that mimic resistance exercise training (RET) in rodents present several limitations, one of them being the electrical stimulus, which is beyond the physiological context observed in humans. Recently, our group developed a conditioning system device that does not use electric shock to stimulate rats, but includes fasting periods before each RET ses
Braz J Med Biol Res. Publicado em: 17/11/2017
-
12. Body composition, resting energy expenditure and inflammatory markers: impact in users of depot medroxyprogesterone acetate after 12 months follow-up
ABSTRACT Objective The aim of this study was to evaluate for 12 months the changes of body weight using Depot Medroxyprogesterone Acetate (DMPA) and if these changes are related to inflammatory markers. Subjects and methods Twenty women of childbearing age who chose the DMPA, without previous use of this method, BMI < 30 kg/m2, and 17 women using IUD TCu
Arch. Endocrinol. Metab.. Publicado em: 05/09/2016