Elastic Waves
Mostrando 1-12 de 48 artigos, teses e dissertações.
-
1. Caracterización de daño por “b-value” de eventos de emisión acústica en ensayos de rotura de roca andesita
ABSTRACT Acoustic emission is a phenomenon that produces elastic waves when materials are subjected to tension. These waves spread towards the material surface where they are received by sensors that convert them into electrical signals for further analysis. In this work, acoustic emission signals were analysed in order to evaluate the amount of accumulated
Matéria (Rio J.). Publicado em: 19/07/2018
-
2. The dispersion curve applied in guided wave propagation in prismatic rods.
Abstract The early detection of failures in structures is a subject of great interest in engineering; several of these techniques are linked with the elastic wave propagation, using guided waves is one of these alternatives. Several structures of interest in engineering are laminar arrangements; the wave propagation in this type of structures depends not on
Lat. Am. j. solids struct.. Publicado em: 02/07/2018
-
3. Band Structure in Carbon Nanostructure Phononic Crystals
We investigate the band structure of elastic waves propagating in carbon nanostructure phononic crystals with square, rectangular, triangular, honeycomb and Kagomé lattices. We also study the influence of carbon nanostructure cross section geometry - circular, hollow circular, square and rotated square with a 45° angle of rotation with respect to the x and
Mat. Res.. Publicado em: 27/11/2017
-
4. Complete Band Gaps in Nano-Piezoelectric Phononic Crystals
We study the band structure of elastic waves propagating in a nano-piezoelectric phononic crystal consisting of a polymeric matrix reinforced by BaTiO3 inclusions in square, rectangular, triangular, honeycomb and Kagomé lattices. We also investigate the influence of inclusion cross section geometry - circular, hollow circular, square and rotated square with
Mat. Res.. Publicado em: 30/10/2017
-
5. Monitoring Heat Treatments in Steels by a Non Destructive Ultrasonic Method
In order to determine if heat treatments can be discerned by nondestructive ultrasonic testing, samples of SAE 1045 and SAE 4140 steels were subjected to the classical heat treatments of annealing, normalizing, quenching, and quenching and tempering, and their elastics constants, Young's, shear and Poisson's moduli, were monitored by ultrasound. Results show
Mat. Res.. Publicado em: 24/08/2017
-
6. Study on Dynamic Compressive Mechanical Properties and Failure Modes of Heat-Treated Granite
Abstract Temperature and external load are two important factors affecting the mechanical properties of rock material. The test on heat- treated granite specimen was carried out by using an improved split Hopkinson pressure bar (SHPB). Based on the test data, the dynamic behavior and failure characteristics of the granite under the coupling action of tempera
Lat. Am. j. solids struct.. Publicado em: 2017-03
-
7. Reflection/refraction at the interface of an elastic solid and a partially saturated porous solid containing liquid filled bound pores and a connected pore space saturated by two-phase fluid
Abstract The phenomena of reflection and refraction of plane waves incident obliquely at a plane interface between uniform elastic solid half-space and porous solid containing liquid filled bound pores and two-phase fluid in connected pores has been analyzed. The amplitude ratios of the reflected and refracted waves to that of the incident wave are calculate
Lat. Am. j. solids struct.. Publicado em: 2015-10
-
8. Dispersion of Love wave in an isotropic layer sandwiched between orthotropic and prestressed inhomogeneous half-spaces
Abstract An in-depth study has been carried out for the dispersion of Love waves in an isotropic elastic layer sandwiched between orthotropic and prestressed inhomogeneous elastic half-spaces. The inhomogeneities in density and rigidity of the lower half-space are space dependent and an arbitrary function of depth. Simple mathematical techniques are used to
Lat. Am. j. solids struct.. Publicado em: 2015-10
-
9. Theoretical modeling of low-attenuation lamb wave modes generation in three-layer adhesive joints using angle beam transducer
AbstractIn this paper, at first the attenuation of Lamb waves in three-layer adhesive joints, including two elastic plates bonded together by a viscoelastic adhesive layer, is investigated using Global matrix method and then suitable incidence angle is theoretically calculated to generate low-attenuation Lamb waves using angle beam transducer. Theoretical bo
Lat. Am. j. solids struct.. Publicado em: 2015-03
-
10. A Comuputerized DRBEM model for generalized magneto-thermo-visco-elastic stress waves in functionally graded anisotropic thin film/substrate structures
A numerical computer model, based on the dual reciprocity boundary element method (DRBEM) for studying the generalized magneto-thermo-visco-elastic stress waves in a rotating functionally graded anisotropic thin film/substrate structure under pulsed laser irradiation is established. An implicit-implicit staggered algorithm was proposed and implemented for us
Lat. Am. j. solids struct.. Publicado em: 2014-05
-
11. Ab. initio study of the structural, elastic, electronic and optical properties of Cu3N
Electronic, optical, elastic, properties of Copper nitride (Cu3N) in cubic anti- ReO3 phase have been studied using the full-potential augmented plane waves (FP-LAPW) within density functional theory (DFT) framework. Generalized gradient approximation (GGA), local density approximation (LDA), Perdew - Burke - Ernzerhof generalized parameterization of gradien
Mat. Res.. Publicado em: 01/04/2014
-
12. Analysis of the stresses in corrugated sheets under bending
This paper presents three different numerical models for the evaluation of the stresses in corrugated sheets under bending. Regarding the numerical simulations different approaches can be considered, i.e., a elastic linear analysis or a physical nonlinear analysis, that considers criteria to fail for the sheet material. Moreover, the construction of the fini
Mat. Res.. Publicado em: 24/01/2014