Dynamic Properties
Mostrando 1-12 de 761 artigos, teses e dissertações.
-
1. Development of a Disposable Pipette Extraction Method Using Coffee Silverskin as an Adsorbent for Chromium Determination in Wastewater Samples by Solid Phase Extraction
A procedure using disposable pipette tips adapted for solid-phase extraction, known as DPX SPE, was used as an alternative way for the chromium determination in wastewater samples. DPX-SPE consists of a device which allows a dynamic contact between the sample and the solid-phase. A residue obtained from the processing of coffee beans, denominate coffee silve
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
2. Simple and fast process using hydrochloric acid for producing synthetic zinc-rich stevensite
Abstract In the last decades, clays have been used in sectors such as health and cosmetics. This requires products that are increasingly pure and present homogeneous properties, hardly found in natural clays. The use of synthetic clays can be a solution. For this, it is necessary to explore techniques for their production. The main focus of this study was to
Cerâmica. Publicado em: 2022
-
3. Influence of the physical characteristics of sand and the crushed filler content on the properties of self-leveling mortars
Abstract The properties of self-leveling mortars (SLMs) in the fresh and hardened state are strongly affected by their formulation. In this study, the influence of three different quartz sands (different physical characteristics) was investigated in SLMs, as well as the replacement of these sands by crushed basalt filler. The tests performed were: spreading,
Cerâmica. Publicado em: 2021-06
-
4. Desenvolvimento de software e interface para o controle por retroalimentação atrasada em sistemas eletroquímicos
In this paper, we show the development of a LabVIEW algorithm able to apply the delayed feedback control on oscillatory electrochemical reactions. The coupling of the control and the experiments was carried out by a real-time apparatus, measuring the faradaic current and, in sequence, applying a calculated circuit voltage as an analog output. The setup was u
Quím. Nova. Publicado em: 2021-06
-
5. Improving Photoluminescence Quantum Yield of CdTe Quantum Dots Using a Binary Solvent (Water + Glycerin) in the One-Pot Approach Synthesis
The present work describes the comparison of the optical and structural properties between CdTe quantum dots (QD) synthesized in water and in the binary solvent (water + glycerin) via one-pot approach synthesis. The optical properties of the nanocrystals obtained with different synthesis parameters were characterized by UV-visible and photoluminescence spect
J. Braz. Chem. Soc.. Publicado em: 2021-04
-
6. Structural Study of Wheat Gliadin in Different Solvents by Spectroscopic Techniques
Physicochemical properties of gliadin in different solvents (dimethyl sulfoxide (DMSO), H2O, and aqueous ethanol) and pH (9.8, 6.8, and 1.2) were investigated using dynamic light scattering (DLS), zeta potential (ZP), and attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR). Gliadin-DMSO and gliadin-deionized water (H2O) (pH 9.8) s
J. Braz. Chem. Soc.. Publicado em: 2021-04
-
7. Application of self-organizing maps to evaluate the influence and behavior of the film formed during salting of Prato cheese
Abstract Problems related to high blood pressure have led consumers to choose foods with low levels of sodium chloride, and an alternative to reduce the salt content of this salt is its partial replacement with KCl. In order to not affect the sensory properties of cheese, salting was performed using a solution containing 70% of NaCl and 30% of KCl in a stati
Food Sci. Technol. Publicado em: 2020-12
-
8. Gold Nanoparticle/Tetrapyridylporphyrin Hybrid Material: Spectroscopic and Electrocatalytic Properties and Sensor Application
An electrocatalytic active hybrid material prepared by successive stepwise coordinative deposition of 20 nm diameter gold nanoparticles (AuNP) with 5,10,15,20-tetra(4-pyridyl)-21H,23H-porphine (TPyP) on fluorine-doped tin oxide (FTO) substrates previously modified with 3-mercaptopropylsilane is described. Their interaction and assembly were studied by UV-Vis
J. Braz. Chem. Soc.. Publicado em: 2020-11
-
9. Ações contra a Covid-19 na População com Síndrome de Down
An electrocatalytic active hybrid material prepared by successive stepwise coordinative deposition of 20 nm diameter gold nanoparticles (AuNP) with 5,10,15,20-tetra(4-pyridyl)-21H,23H-porphine (TPyP) on fluorine-doped tin oxide (FTO) substrates previously modified with 3-mercaptopropylsilane is described. Their interaction and assembly were studied by UV-Vis
Arq. Bras. Cardiol.. Publicado em: 2020-11
-
10. Evaluation of Dynamic Mechanical Properties of Fique Fabric/Epoxy Composites
The fique is a plant typical of the Colombian Andes, from which relatively common items are fabricated. One of these is woven fabric extensively applied in sackcloths. The mechanical strength of fique fabric have motivated recent investigations on possible reinforcement of polymer matrix composites. For this purpose its thermo-mechanical behavior was unveile
Mat. Res.. Publicado em: 14/10/2019
-
11. Aplicação de método estatístico no estudo da influência do peróxido de hidrogênio e do borohidreto de sódio na síntese de nanoparticulas de prata (AGNPS)
RESUMO Nanomateriais vem atraindo bastante atenção nos últimos anos em virtude das suas propriedades que permitem aplicações em diversas áreas como: química, física, medicina, fármacos e engenharias. No universo dos nanomaterias, as nanopartículas de prata (AgNPs) tem despertado o interesse de vários pesquisadores devido ao seu potencial bacterici
Matéria (Rio J.). Publicado em: 16/09/2019
-
12. Comportamento térmico de compósitos de poliestireno reciclado reforçado com celulose de bagaço de cana
RESUMO O poliestireno expandido (EPS) é um polímero reciclável amplamente utilizado na fabricação de embalagens para isolamento acústico, proteção de bens de consumo duráveis e na indústria da construção civil. O PS é facilmente reciclável com o aumento da temperatura, podendo dar origem a novos materiais. Entretanto suas propriedades térmicas
Matéria (Rio J.). Publicado em: 16/09/2019