Dynamic Modulus Of Elasticity
Mostrando 1-12 de 29 artigos, teses e dissertações.
-
1. Influence of the physical characteristics of sand and the crushed filler content on the properties of self-leveling mortars
Abstract The properties of self-leveling mortars (SLMs) in the fresh and hardened state are strongly affected by their formulation. In this study, the influence of three different quartz sands (different physical characteristics) was investigated in SLMs, as well as the replacement of these sands by crushed basalt filler. The tests performed were: spreading,
Cerâmica. Publicado em: 2021-06
-
2. Pastas de ultra-alto desempenho submetidas a cura sob pressão
Resumo A aplicação de pressão em misturas cimentícias tem efeitos positivos no desenvolvimento da microestrutura e nas propriedades mecânicas da matriz endurecida. Contudo, os benefícios têm sido estudados em níveis altos de pressão ou combinados com cura térmica. Este artigo está inserido em uma pesquisa em que foi proposto um equipamento alterna
Ambient. constr.. Publicado em: 10/06/2019
-
3. Influence of the moisture content on the dynamic modulus of elasticity of concrete made with recycled aggregate
Resumo O comportamento elástico do concreto é estimado a partir de sua resistência a compressão ou determinado por ensaios estáticos ou dinâmicos. Como a maioria das normas não consideram o teor de umidade interna do concreto e desconsideram o uso de agregados reciclados ao propor equações para a estimativa do módulo de elasticidade, é frequente s
Ambient. constr.. Publicado em: 2019-04
-
4. Impacto do uso de resíduo de vermiculita no estado endurecido de argamassas
Resumo No processo de beneficiamento da vermiculita é gerado um resíduo fino para o qual atualmente ainda não foi desenvolvida uma aplicação que possibilite a utilização em larga escala. Uma alternativa que vem sendo estudada é a associação com cimento Portland em composições de argamassas e concretos, em função da composição química do res�
Cerâmica. Publicado em: 2019-01
-
5. Effects of Multiple Extrusions on Structure-property Performance of Natural Fiber High-density Polyethylene Biocomposites
Detailed analysis of the effects of multiple extrusions on physical, mechanical, micro-structural as well as dynamic mechanical thermal properties of natural fiber high-density polyethylene (HDPE) composites is reported. Composite materials containing HDPE, wood flour, and Maleic Anhydride polyethylene (MAPE) were manufactured and subjected to a recycling pr
Mat. Res.. Publicado em: 01/02/2018
-
6. Evaluation of degree of conversion, microtensile bond strength and mechanical properties of three etch-and-rinse dental adhesives
Abstract This study evaluated microtensile bond strength (µTBS), degree of conversion, modulus of elasticity and ultramicrohardness of three etch-and-rinse adhesives systems. The materials evaluated were: Ambar (FGM), Optibond (Kerr) and Magic Bond (Vigodent). The degree of conversion was analyzed by FTIR/ATR. To evaluate bond strength (μTBS) in dentin, 15
Polímeros. Publicado em: 21/09/2017
-
7. Viscoelastic Substrates Effects on the Elimination or Reduction of the Sandwich Structures Oscillations Based on the Kelvin-Voigt Model
Abstract Effects of viscoelastic substrates on the sandwich structures oscillations are examined in this paper. In this regard, dynamic response of sandwich annular panels with FG polar orthotropic face sheets resting on viscoelastic substrate is presented. Young’s modulus in the radial and circumferential direction, shear modulus and density of each face
Lat. Am. j. solids struct.. Publicado em: 2017
-
8. Effect of wood particle treatment on the properties of gypsum plaster pastes and composites
ABSTRACT In this work the performance of gypsum plaster and wood particle in pastes and composites was investigated. Wood particles of fineness 0.42 mm and 1.20 mm were employed. Natural wood particles and the treated ones in cold or hot water (80 °C) were performed. The effects of the extractives solutions from the treatments applied to the wood particles
Matéria (Rio J.). Publicado em: 2016-12
-
9. Avaliação do módulo de elasticidade dinâmico de concreto produzido com agregado graúdo reciclado de concreto
O setor da construção civil apresenta um grande potencial de geração de resíduos sólidos, caracterizando-se como um dos maiores geradores deste material no mundo. Por este motivo, é importante adotar um novo modelo de desenvolvimento, que busque, gradativamente, a não geração e a minimização de resíduo, assim como alternativas para o reaproveita
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 13/01/2012
-
10. Investigating the rheological properties of crumb rubber modified bitumen and its correlation with temperature susceptibility
There is substantial evidence on the advantages of using crumb rubber in enhancing conventional bitumen properties, gaining environmental protection and boosting industrial-economical benefits. Thus, the use of this ingenious additive in bitumen modification through sustainable technology is highly advocated.The main objective of this research is to investig
Mat. Res.. Publicado em: 22/11/2012
-
11. Ensaios não destrutivos aplicados à madeira serrada e estruturas : técnicas potenciais para uso no Brasil
The wood has many different characteristics, resulting, in part, of the conditions in which the tree grows. The physical conditions of the wood are also influenced by its complex internal structure, resulting in an anisotropic behavior. Within this variability, its best use and application can be reached through non-destructive methods. The non-destructive m
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 18/11/2011
-
12. PROPRIEDADES FÍSICO-MECÂNICAS DE CHAPAS AGLOMERADAS PRODUZIDAS COM BAMBU, PINUS E EUCALIPTO. / PHYSICAL AND MECHANICAL PROPERTIES OF PARTICLEBOARD PRODUCED WITH BAMBOO, PINE AND EUCALYPT.
This study investigated the physical and mechanical properties of particleboards formed of bamboo (Bambusa tuldoides), pine (Pinus taeda) and eucalyptus (Eucalyptus grandis) and their combinations. To this end, panels were made, defined by the use of each type of particle pure or mixed by two or three being set 0, 25, 50, 75 and 100% of dry weight proportion
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 18/07/2011