Dynamic Mechanical Thermal Properties
Mostrando 1-12 de 65 artigos, teses e dissertações.
-
1. Comportamento térmico de compósitos de poliestireno reciclado reforçado com celulose de bagaço de cana
RESUMO O poliestireno expandido (EPS) é um polímero reciclável amplamente utilizado na fabricação de embalagens para isolamento acústico, proteção de bens de consumo duráveis e na indústria da construção civil. O PS é facilmente reciclável com o aumento da temperatura, podendo dar origem a novos materiais. Entretanto suas propriedades térmicas
Matéria (Rio J.). Publicado em: 16/09/2019
-
2. Pastas de ultra-alto desempenho submetidas a cura sob pressão
Resumo A aplicação de pressão em misturas cimentícias tem efeitos positivos no desenvolvimento da microestrutura e nas propriedades mecânicas da matriz endurecida. Contudo, os benefícios têm sido estudados em níveis altos de pressão ou combinados com cura térmica. Este artigo está inserido em uma pesquisa em que foi proposto um equipamento alterna
Ambient. constr.. Publicado em: 10/06/2019
-
3. Thermomechanical Properties of Corn Starch Based Film Reinforced with Coffee Ground Waste as Renewable Resource
Abstract Starches polymeric films offer several advantages for the replacement of synthetic polymers due to their biodegradability, non-toxicity, availability and low cost. However, the high biodegradation potential can cause fragility, considering some fundamental mechanical properties. Therefore, starch based polymeric films were reinforced incorporating l
Mat. Res.. Publicado em: 07/01/2019
-
4. Effect of compatibiliser on the properties of polypropylene/glass fibre/nanoclay composites
Abstract Glass fibre (GF), nanoclay (NC) and hybrid composites compatibilised with maleic anhydride polypropylene (MAPP) were prepared by extrusion and injection moulding. The fourier transform infra-red spectra revealed the characteristic absorption peaks of MAPP in the compatibilised GF and NC composites. A decrement in the peak intensity of X-ray diffrac
Polímeros. Publicado em: 21/05/2018
-
5. Effect of Thermal Treatment on the Dynamic Behaviors at a Fixed Loading Rate of Limestone in Quasi-vacuum and Air-filled Environments
Abstract Thermal damage in rock engineering occurs in the air-filled and quasi-vacuum environments of rock mass located near or far from the free surface. Meanwhile, dynamic loads are encountered frequently in engineering practice. In this study, 39 limestone samples are prepared, and a series of laboratory tests, including split Hopkinson pressure bar (SHP
Lat. Am. j. solids struct.. Publicado em: 03/05/2018
-
6. Free vibration analysis and design optimization of SMA/Graphite/Epoxy composite shells in thermal environments
Abstract Composite shells, which are being widely used in engineering applications, are often under thermal loads. Thermal loads usually bring thermal stresses in the structure which can significantly affect its static and dynamic behaviors. One of the possible solutions for this matter is embedding Shape Memory Alloy (SMA) wires into the structure. In the
Lat. Am. j. solids struct.. Publicado em: 23/04/2018
-
7. Effects of Multiple Extrusions on Structure-property Performance of Natural Fiber High-density Polyethylene Biocomposites
Detailed analysis of the effects of multiple extrusions on physical, mechanical, micro-structural as well as dynamic mechanical thermal properties of natural fiber high-density polyethylene (HDPE) composites is reported. Composite materials containing HDPE, wood flour, and Maleic Anhydride polyethylene (MAPE) were manufactured and subjected to a recycling pr
Mat. Res.. Publicado em: 01/02/2018
-
8. A Microrheological Study of Poly(Methyl Methacrylate) Elastomer/Poly(Ethylene Terephthalate) (PMMAelast/PET) Blends
This study involved an evaluation of the influence of phase inversion in poly(methyl methacrylate) elastomer/poly(ethylene terephthalate) binary blends (PMMAelast/PET) and the effect of the addition of poly(methyl methacrylate-glycidyl methacrylate-ethyl acrylate) (MGE) interfacial compatibilizer on the microrheological properties of this polymer blend. Ther
Mat. Res.. Publicado em: 30/11/2017
-
9. Thermal and mechanical properties of bio-based plasticizers mixtures on poly (vinyl chloride)
Abstract The use of mixtures of nontoxic and biodegradable plasticizers coming from natural resources is a good way to replace conventional phthalates plasticizers. In this study, two secondary plasticizers of epoxidized sunflower oil (ESO) and epoxidized sunflower oil methyl ester (ESOME) were synthesized and have been used with two commercially available b
Polímeros. Publicado em: 21/09/2017
-
10. Biocomposites reinforced with natural fibers:thermal, morphological and mechanical characterization
ABSTRACT This study evaluates the thermal, morphological and mechanical behavior of polypropylene (PP) composite with different natural fibers. The fibers used were wood, sugarcane, bamboo, babassu, coconut and kenaf with and without coupling agent. The thermal, morphological and mechanical properties were evaluated, and a composite PP+GFPP (glass fiber) was
Matéria (Rio J.). Publicado em: 20/07/2017
-
11. Cellulose Nanostructures Obtained from Waste Paper Industry: A Comparison of Acid and Mechanical Isolation Methods
The paper industry primary waste is usually deposited in landfills or incinerated. This material has a high content of lignocellulosic components, which could be converted to cellulose nanostructures (CNS). This study aimed to compare compositional (Fourier transform infrared spectroscopy), thermal (thermogravimetric analysis), morphological (scanning electr
Mat. Res.. Publicado em: 29/06/2017
-
12. Normal Mode Analysis to a Poroelastic Half-Space Problem under Generalized Thermoelasticity
Abstract The thermo-hydro-mechanical problems associated with a poroelastic half-space soil medium with variable properties under generalized thermoelasticity theory were investigated in this study. By remaining faithful to Biot’s theory of dynamic poroelasticity, we idealized the foundation material as a uniform, fully saturated, poroelastic half-space me
Lat. Am. j. solids struct.. Publicado em: 2017-06