Dynamic Configuration
Mostrando 1-12 de 150 artigos, teses e dissertações.
-
1. Numerical and experimental evaluation of the thermally stratified atmospheric boundary layer in wind tunnels
Abstract The atmospheric boundary layer (ABL) flow occurs due to the interaction between the Earth’s surface and atmosphere, and it usually happens under thermal stratification. Therefore, in order to emulate this phenomenon, atmospheric wind tunnels need appropriate devices, such as spires and cubical roughness elements, at the entrance of the wind tunnel
REM, Int. Eng. J.. Publicado em: 2021-01
-
2. SYNTHESIS, CHARACTERIZATION, ADSORPTION AND THERMODYNAMIC STUDIES OF PURE AND BINARY CO2-N2 MIXTURES ON OXYGEN ENRICHED NANOSTRUCTURED CARBON ADSORBENTS
Abstract Oxygen enriched porous carbons have been synthesized by a nanocasting technique using mesoporous zeolite as template and epoxy resin as precursor. Characterization results show the effect of the nanocasting technique on the development of heterogeneous surface, high basicity, and high surface area of 686.37 m2g-1, beneficial for CO2 adsorption. Pure
Braz. J. Chem. Eng.. Publicado em: 09/12/2019
-
3. Business Model and Strategy: In Search of Dialog through Value Perspective
Resumo O valor é a unidade de análise de um modelo de negócio, e também o principal objetivo da estratégia. Tanto do ponto de vista acadêmico como prático a questão que guia a definição de um modelo de negócio é: como criar, configurar e apropriar valor? As teorias de administração estratégica e de modelos de negócio já realizaram avanços e
Rev. adm. contemp.. Publicado em: 25/11/2019
-
4. Effect of Aerodynamic Configuration Parameters on Lateral-Directional Stability of Double-Swept Flying Wing Aircraft
ABSTRACT: Poor lateral-directional stability due to the absence of vertical stabilizer is a great risk to the aircraft with flying wing layout. In this paper, an unmanned aerial vehicle with this kind of configuration is chosen as the research object. A three-dimensional model of the unmanned aerial vehicle is established, and then the sensitivity analysis i
J. Aerosp. Technol. Manag.. Publicado em: 09/09/2019
-
5. Effect of Semi-Apical Angle on the Crush Mechanics of Metallic Bi-Tubular Tubes under Dynamic Axial Loading
ABSTRACT Aerospace and automotive industrial advancement demands high energy absorbing structures for the human and equipement safety during transportaion and accidental emergencies. Thin-walled metallic tubes applications in the structures serve the purpose by absorbing energy during such dynamic scenarios. A new concept is presented in this study, involvin
Matéria (Rio J.). Publicado em: 20/05/2019
-
6. A decisão de inovar e o movimento das capacidades dinâmicas
Resumo O presente artigo apresenta uma proposta para operacionalização do conceito de capacidades dinâmicas, criando um modelo de análise a partir da revisão teórica realizada. A pesquisa é feita por meio de estudo de múltiplos casos, resgatando dados históricos, e começa de uma decisão estratégica voltada à inovação. Em seguida, observam-se a
Gest. Prod.. Publicado em: 16/05/2019
-
7. Computational Investigation on the Effects of Two-Way Wing Morphing Strategy in the Critical Mach Number
ABSTRACT: The elasto-flexible wing morphing is an advanced methodology to achieve higher lift-to-drag (L/D) ratio for the subsonic wing configurations at the given flow conditions. The present article describes mechanisms of continuous morphing of a swept back wing for achieving effective delay in the critical Mach number (Mcr) distribution over the wing sur
J. Aerosp. Technol. Manag.. Publicado em: 08/03/2018
-
8. Axial Crushing of Uni-Sectional Bi-Tubular Inner Tubes with Multiple Outer Cross-Sections
Abstract Increase of energy absorption along with smooth load displacement curve, reduced peak force and high mean crushing force is the key in the modern dynamic design of structures. In this regard, a new metallic tubular configuration consisting of uni-sectional bi-tubular inner tubes, with outer tubes of multiple varied cross-sections is proposed and cru
Lat. Am. j. solids struct.. Publicado em: 2017-12
-
9. Investigation of the Energy Absorption Characteristics of Metallic Tubes with Curvy Stiffeners under Dynamic Axial Crushing
Abstract Thin walled multi-cell columns are highly efficient energy absorbers under axial compressions. Multi-cell features are usually obtained by placing stiffeners or ribs to get the required geometry features in the columns. In this study, the curved stiffeners with varying numbers in different configurations are used to support the circular single and b
Lat. Am. j. solids struct.. Publicado em: 2017-08
-
10. Investigation of the Energy Absorption Characteristics of Metallic Tubes with Curvy Stiffeners under Dynamic Axial Crushing
Abstract Thin walled multi-cell columns are highly efficient energy absorbers under axial compressions. Multi-cell features are usually obtained by placing stiffeners or ribs to get the required geometry features in the columns. In this study, the curved stiffeners with varying numbers in different configurations are used to support the circular single and b
Lat. Am. j. solids struct.. Publicado em: 2017-08
-
11. A New Dynamic Powder Consolidation Technique Using Shock Waves
Techniques for shock consolidation of powders have been developed for different purposes, including the synthesis of diamond from carbon powder. In this work, a new device configuration for dynamic consolidation is proposed. It consists of three coaxial tubes, with a conical cover made of explosive at the top of the device. The inner tube contains the powder
Mat. Res.. Publicado em: 13/07/2017
-
12. Developing a dynamic virtual stimulation protocol to induce linear egomotion during orthostatic posture control test
Abstract Introduction In this work, the effect of a dynamic visual stimulation (DS) protocol was used to induce egomotion, the center of pressure (COP) displacement response. Methods DS was developed concerning the scenario structure (chessboard-pattern floor and furniture) and luminance. To move the scenario in a discrete forward (or backward) direction,
Res. Biomed. Eng.. Publicado em: 10/10/2016