Dynamic Behavior
Mostrando 1-12 de 848 artigos, teses e dissertações.
-
1. Numerical simulations of ceramic firing in catenary kilns
Abstract Kiln geometries were developed to reach homogeneous temperatures above 900 °C, during the firing process, aiming to improve the production process of the ceramists from Vale do Jequitinhonha (MG/Brazil). Techniques of reactive flow numerical solution using the software Ansys CFX have been used to foresee the behavior of the firings. Two types of ca
Cerâmica. Publicado em: 2022
-
2. THE INFLUENCE OF THE FILM FORMED ON THE PRATO CHEESE SURFACE DURING THE NACL AND KCL SALTING PROCESS: APPLICATION OF THE FINITE ELEMENT METHOD AND NEURAL NETWORKS OF THE SELF-ORGANIZING MAP (SOM) AND MULTILAYER PERCEPTRON (MLP) TYPES
Sodium chloride is used in the cheese salting process as it promotes sensory changes and food preservation. However, in excess can cause hypertension problems, and for this reason, it has been partially replaced by potassium chloride. In the present work, Prato cheese was subjected to joint diffusion of NaCl and KCl by immersion in static and stirred brine.
Química Nova. Publicado em: 2022
-
3. Dextran Sulfate/Pramlintide Polyelectrolyte Nanoparticles as a Promising Delivery System: Optimization, Evaluation of Supramolecular Interactions and Effect on Conformational Stability of the Peptide Drug
In this study, we investigated the feasibility to obtain nanoparticles (NPs) by assembling pramlintide (Pram) with dextran sulfate (DexS), as a new approach for mucosal peptide delivery. DexS/Pram NPs were prepared by dropwise addition of a Pram solution to a DexS solution under magnetic stirring. The physicochemical characteristics of NPs and molecular inte
J. Braz. Chem. Soc.. Publicado em: 2021-08
-
4. Dolomite-zirconia reaction sintered bonded coarse magnesia ceramics: effect of the bonding proportion
Abstract Refractory ceramic materials were manufactured, mainly composed of magnesia grains (coarse and medium fraction) and CaZrO3/MgO as a binding phase produced from the reaction sintering between CaMg(CO3)2 (dolomite) and m-ZrO2 (monoclinic zirconia), which constituted the finer fraction. Different relationships between the proportion and the size of the
Cerâmica. Publicado em: 2021-06
-
5. Editorial Comment: Luts-V: A new simplified score for assessing lower urinary tract symptoms in men
Abstract Refractory ceramic materials were manufactured, mainly composed of magnesia grains (coarse and medium fraction) and CaZrO3/MgO as a binding phase produced from the reaction sintering between CaMg(CO3)2 (dolomite) and m-ZrO2 (monoclinic zirconia), which constituted the finer fraction. Different relationships between the proportion and the size of the
Int. braz j urol.. Publicado em: 2021-06
-
6. Oxidative Stress & Male Infertility - A necessary and conflicted indissociable marriage: How and when to call for evaluation?
Abstract Refractory ceramic materials were manufactured, mainly composed of magnesia grains (coarse and medium fraction) and CaZrO3/MgO as a binding phase produced from the reaction sintering between CaMg(CO3)2 (dolomite) and m-ZrO2 (monoclinic zirconia), which constituted the finer fraction. Different relationships between the proportion and the size of the
Int. braz j urol.. Publicado em: 2021-06
-
7. Editorial Comment: Vasectomy re-reversal: effectiveness and parameters associated with its success
Abstract Refractory ceramic materials were manufactured, mainly composed of magnesia grains (coarse and medium fraction) and CaZrO3/MgO as a binding phase produced from the reaction sintering between CaMg(CO3)2 (dolomite) and m-ZrO2 (monoclinic zirconia), which constituted the finer fraction. Different relationships between the proportion and the size of the
Int. braz j urol.. Publicado em: 2021-06
-
8. Dysplasia of the fibrous sheath with axonemal and centriolar defects combined with lack of mitochondrial activity as associated factors of ICSI failure in primary ciliary dyskinesia syndrome
Abstract Refractory ceramic materials were manufactured, mainly composed of magnesia grains (coarse and medium fraction) and CaZrO3/MgO as a binding phase produced from the reaction sintering between CaMg(CO3)2 (dolomite) and m-ZrO2 (monoclinic zirconia), which constituted the finer fraction. Different relationships between the proportion and the size of the
Int. braz j urol.. Publicado em: 2021-06
-
9. Application of self-organizing maps to evaluate the influence and behavior of the film formed during salting of Prato cheese
Abstract Problems related to high blood pressure have led consumers to choose foods with low levels of sodium chloride, and an alternative to reduce the salt content of this salt is its partial replacement with KCl. In order to not affect the sensory properties of cheese, salting was performed using a solution containing 70% of NaCl and 30% of KCl in a stati
Food Sci. Technol. Publicado em: 2020-12
-
10. Chitosan-Sodium Alginate Polyelectrolyte Complex Coating Pluronic® F127 Nanoparticles Loaded with Citronella Essential Oil
Pluronic® F127 nanoparticles were loaded with citronella essential oil (CEO) and then covered with chitosan-sodium alginate polyelectrolyte complex (PEC). The system was characterized according to size, zeta potential and stability over time. Dynamic light scattering (DLS) in different proportions of water/ethanol as a dispersive medium was important in con
J. Braz. Chem. Soc.. Publicado em: 2020-04
-
11. Aerodynamic effects on a high slenderness concrete chimney
Resumo Este trabalho apresenta os resultados da determinação teórico-experimental do comportamento aerodinâmico de uma chaminé esbelta de concreto armado, com 150m de altura e esbeltez 30. Foram construídos dois modelos reduzidos: um rígido para medição das pressões e outro aeroelástico, reproduzindo as principais características dinâmicas da es
Rev. IBRACON Estrut. Mater.. Publicado em: 13/12/2019
-
12. Hardening and Dynamic Recovery During Hot Compression Test of Copper Simulated as Viscoplastic Material
The Norton-Bailey equation was used to simulate by finite elements the hardening and dynamic recovery of copper during the hot compression tests. The constants of Norton-Bailey equation were determined from the Voce-Kocks model. The simulation assumes a Mortar Contact with Coulomb friction and axial symmetry. Numerical results were compared with experiments.
Mat. Res.. Publicado em: 05/12/2019