Duplex Stainless Steel
Mostrando 25-36 de 85 artigos, teses e dissertações.
-
25. Cyclic Polarization Study of Thick Welded Joints of Lean Duplex Stainless Steel for Application in Biodiesel Industry
Thick welded joints of UNS S32304 lean duplex stainless steel (LDSS) has been studied in acidified glycerin, a byproduct of biodiesel plants, using cyclic polarization technique. LDSS S32304 thick plates were welded by different processes commonly employed in the fabrication process: shielded metal arc welding, gas metal arc welding and flux cored arc weldin
Mat. Res.. Publicado em: 12/12/2016
-
26. Rietveld and Impedance Analysis of Cold and Hot Rolled Duplex and Lean Duplex Steels for Application in Paper and Pulp Industry
In this study, X-Ray Diffraction (XRD) and Rietveld Refinement were performed to identify and quantify the ferrite and austenite phase of cold and hot rolled duplex stainless steels (UNS S31803) and lean duplex stainless steels (UNS S32304). Electrochemical impedance spectroscopy (EIS) was applied to evaluate the chemical behavior of duplex and lean duplex s
Mat. Res.. Publicado em: 10/11/2016
-
27. Wear and Corrosion Study of Plasma Nitriding F53 Super duplex Stainless Steel
Super duplex stainless steels (SDSS) have high corrosion resistance because of their high contents of chromium, nickel, molybdenum and nitrogen but low wear resistance. To improve the wear resistance of these steels without affecting their corrosion resistance, samples of SDSS were treated by plasma ion nitriding at temperatures ranging from 350 °C to 570 �
Mat. Res.. Publicado em: 22/09/2016
-
28. Deposition of TiO2 Film on Duplex Stainless Steel Substrate Using the Cathodic Cage Plasma Technique
This research used the "cathodic cage (CC)" technique for TiO2 film deposition on duplex stainless steel substrate. This technique uses a multiple hollow cathode effect. Duplex stainless steel substrates were treated at temperatures of 300°C, 350°C and 400°C, giving a temperature value ratio (Ts/Tm) of 0.27 to 0.31 (Ts being the substrate temperature and
Mat. Res.. Publicado em: 15/09/2016
-
29. Ferrite Quantification Methodologies for Duplex Stainless Steel
ABSTRACT In order to quantify ferrite content, three techniques, XRD, ferritoscope and optical metallography, were applied to a duplex stainless steel UNS S31803 solution-treated for 30 min at 1,000, 1,100 and 1,200 °C, and then compared to equilibrium of phases predicted by ThermoCalc® simulation. As expected, the microstructure is composed only by austen
J. Aerosp. Technol. Manag.. Publicado em: 2016-09
-
30. Use of Magnetic Barkhausen Noise (MBN) to Follow Up the Formation of Sigma Phase in Saf2205 (UNS S31803) Duplex Stainless Steel
Abstract Duplex stainless steels have a structure normally composed of austenite and ferrite in approximately equal proportions. In order to attain control of its fabrication processes and performance, it is important to understand its microstructural evolution, due to the formation of intermetallic phases such as sigma (σ) and chi (χ), which may cause a s
Mat. Res.. Publicado em: 01/08/2016
-
31. Microstructural behavior of SAF 2205 Duplex Stainless Steel Welded by Friction Hydro Pillar Processing
Abstract The Friction Hydro-Pillar Process (FHPP) is an innovative process that has been recently studied regarding its possible in situ repair applications. There is still no literature about usage of the FHPP on duplex stainless steel (DSS) base materials to smaller forces than 25 kN. The investigation on DSS processing is crucial due his wide variety of c
Mat. Res.. Publicado em: 18/07/2016
-
32. Analisys of hot deformation behavior of super duplex stainless steel UNS S32760 through processing maps
Abstract The need for materials with higher strength and corrosion resistance in corrosive environments, such as in the oil extraction in saline media, has led to the use of super duplex stainless steels in projects such as the Pre-sal. The manufacture of these materials involves the step of thermomechanical processing, whose performance depends on the worka
Rem: Rev. Esc. Minas. Publicado em: 2016-06
-
33. Identificación de Fases y Precipitados por MFA en Uniones de Acero Inoxidable Dúplex
Abstract Atomic Force Microscopy (AFM) is a characterization technique that generates topographic images of surfaces at very high resolutions, and operates recording details of surface relief of material with a cantilever that moves on the sample, while a piezoelectric detector monitors changes in height. It acquires relevance in the field of identification
Soldag. insp.. Publicado em: 2016-06
-
34. Friction stir welding of duplex and superduplex stainless steels and some aspects of microstructural characterization and mechanical performance
Friction stir welding was used to produce butt joints on 6 mm thick plates of UNS S32101 lean duplex stainless steel, S32205 duplex stainless steel, and S32750 and S32760 superduplex stainless steels. Fully consolidated joints were achieved, with full penetration, using heat input of 1.37-1.50 kJ/mm. Specimens submitted to tensile testing performed perpendic
Mat. Res.. Publicado em: 12/02/2016
-
35. Effect of Cooling Rate on the Corrosion Behavior of As-Cast SAF 2205 Duplex Stainless Steel After Solution Annealing Treatment
The formation of intermetallic phases alters the properties of duplex stainless steel and is therefore a crucial factor in its performance. For example, the formation of sigma phase in duplex steel increases its brittleness and decreases its corrosion resistance because this phase consumes chromium and molybdenum in solid solution, thus leading to the deplet
Mat. Res.. Publicado em: 23/10/2015
-
36. Mechanical and Corrosion Properties of a Duplex Steel Welded using Micro-Arc or Laser
Duplex stainless steels have been extensively used in parts that are subject to corrosive environments and that have high mechanical strength requirements. Welding usually distorts the well-balanced austenite-ferrite ratio, and can produce brittle intermetallic phases; therefore, post-welding heat treatments are usually required. For applications where post-
Mat. Res.. Publicado em: 2015-08