Dissolution Rate
Mostrando 1-12 de 186 artigos, teses e dissertações.
-
1. The Comparative Investigation of Corrosion and Passivation for X65 Carbon Steel in pH 1 to 5 HNO3 Solutions without and with 0.01 mol L-1 NaNO2
The influence of 0.01 mol L-1 NaNO2 addition on the corrosion and passivation of X65 carbon steel in pH 1 to 5 HNO3 solutions was investigated and compared by electrochemical methods and microstructural techniques. In the pH 1 to 5 solutions without NaNO2, the X65 steel presented the electrochemical characteristic of active dissolution, and the corrosion rat
J. Braz. Chem. Soc.. Publicado em: 2020-04
-
2. Silymarin-Laden PVP-Nanocontainers Prepared Via the Electrospraying Technique for Improved Aqueous Solubility and Dissolution Rate
Abstract The aim of the present research was to develop a silymarin-laden PVP-nanocontainer providing ameliorated aqueous solubility and dissolution of the drug. Several silymarin-laden formulations were formed with varying quantities of PVP and SDS via the solvent evaporation method using the electrospraying technique. The influence of the hydrophilic carri
Braz. arch. biol. technol.. Publicado em: 28/11/2019
-
3. Inclusion complexes and self-assembled cyclodextrin aggregates for increasing the solubility of benzimidazoles
Albendazole and fenbendazole are imidazole derivatives that exhibit broad spectrum activity against parasites, but the low solubility of these drugs considerably reduces their effectiveness. Complexation of albendazole and fenbendazole with cyclodextrins (β-cyclodextrin and hydroxypropyl-β-cyclodextrin) in both water and an aqueous solution of polyvinylpyr
Braz. J. Pharm. Sci.. Publicado em: 25/11/2019
-
4. In vitro characterization and in vivo performance of mefenamic acid-sodium diethyldithiocarbamate based liposomes
Mefenamic acid (MFA) is a hydrophobic drug with low dissolution rate. This study aimed to develop stable and reproducible aqueous formulations of MFA using liposomes as drug carriers. The drug entrapment, particles size and drug release profiles, and stability and reproducibility of the liposomes were determined. In addition, the maximum tolerated dose (MTD)
Braz. J. Pharm. Sci.. Publicado em: 25/11/2019
-
5. Solid dispersion-based pellet for colon delivery of tacrolimus through time- and pH-dependent layer coating: preparation, in vitro and in vivo studies
The intent of the present investigation is to develop and evaluate colon-specific coated tacrolimus solid dispersion pellet (SDP) that retards drug release in the stomach and small intestine but progressively releases in the colon. Tacrolimus-SDP was prepared by extrusion-spheronization technology and optimized by the micromeritic properties including flowab
Braz. J. Pharm. Sci.. Publicado em: 24/10/2019
-
6. EFFECT OF Acidithiobacillus thiooxidans-CYSTEINE INTERACTIONS ON PYRITE BIOOXIDATION BY Acidithiobacillus ferrooxidans IN THE PRESENCE OF COAL COMPOUNDS
Abstract This study evaluated the biooxidation of pyrite contained in a Colombian coal (2.38 mm < particle size < 0.50 mm). The variables were cysteine concentration (0-600 mg/L) and culture type (pure Acidithiobacillus ferrooxidans (ATCC 23270) and a consortium of Acidithiobacillus thiooxidans (ATCC 15494) and Acidithiobacillus ferrooxidans). Pyrite oxidati
Braz. J. Chem. Eng.. Publicado em: 30/09/2019
-
7. STABILITY AND TOXICITY PROFILE OF SOLUTION ENHANCED DISPERSION BY SUPERCRITICAL FLUIDS (SEDS) FORMULATED Andrographis paniculata EXTRACT
Abstract The main objective was to evaluate the stability and toxicity of a Solution Enhanced Dispersion by Supercritical Fluids (SEDS) formulated A. paniculata extract that was intended for food applications. The best formulated SEDS A. paniculata extract with improved dissolution of andrographolide (data not shown) was obtained using 25 mg/mL A. paniculata
Braz. J. Chem. Eng.. Publicado em: 30/09/2019
-
8. Evaluating the discriminatory power of a dissolution assay for rosuvastatin calcium capsules: Solid-state properties and dissolution media
We propose to evaluate the dissolution properties of rosuvastatin calcium (ROSC) capsules in different media to characterize the discriminatory power of the assay method. Dissolution assays were performed in media with different pH, and including the surfactant sodium dodecyl sulfate (SDS). Several immediate-release formulations were manufactured using the c
Braz. J. Pharm. Sci.. Publicado em: 23/09/2019
-
9. Termogravimetric Characterization of Biomass Impregnated with Biodegradable Ionic Liquids
ABSTRACT Different classes of solvents such as mineral acids and ionic liquids have proved to be capable of disrupting hydrogen bonds among different polysaccharide chains. Recently, a specific family of proticionic liquids (PILs) has been developed with functionality in various industrial applications, adding to the benefits and advantages of their use, sin
Floresta Ambient.. Publicado em: 23/09/2019
-
10. Design and evaluation of rhubarb total free anthraquinones oral colon-specific drug delivery granules to improve the purgative effect
Rhubarb is commonly used as a cathartic in Asian countries. However, researchers have devotedextensive concerns to the quality control and safety of rhubarb and traditional Chinese preparations composed of rhubarb due to the instable purgative effect and potential nephrotoxicity of anthraquinones. In this study, we aimed to prepare rhubarb total free anthraq
Braz. J. Pharm. Sci.. Publicado em: 10/07/2019
-
11. Brushite cement containing gelatin: evaluation of mechanical strength and in vitro degradation
Resumo Os cimentos de fosfato de cálcio (CPCs) são materiais potenciais para reparar defeitos ósseos, principalmente devido à sua excelente biocompatibilidade e osteocondutividade. No entanto, suas baixas propriedades mecânicas limitam suas aplicações clínicas. A adição de gelatina pode melhorar as propriedades mecânicas e biológicas dos CPCs, ma
Cerâmica. Publicado em: 06/06/2019
-
12. Ascorbic acid encapsulation in a glassy carbohydrate matrix via hot melt extrusion: Preparation and characterization
Abstract Hot melt extrusion technology using a twin-screw extruder was employed to obtain maltodextrin, maltodextrin-gum arabic and maltodextrin-trehalose based glassy extrudates containing ascorbic acid (dispersed phase). Ascorbic acid payload of all three formulations was more than 15.67 g/100 g extrudates while the ascorbic acid yield was above 97%. The g
Food Sci. Technol. Publicado em: 16/05/2019