Direct Numerical Simulations
Mostrando 1-12 de 37 artigos, teses e dissertações.
-
1. Modular modeling approach for FDM printed structures and piezo disks for metamaterial design
Abstract Research in metamaterials has recently gained interest in the field of noise and vibration control. The ability of creating band gap zones with minimum added mass is the main feature behind its success. In addition, the use of 3D printed parts, particularly the Fused Deposition Modeling (FDM), offers a practical solution for manufacturing parts with
Lat. Am. j. solids struct.. Publicado em: 12/08/2019
-
2. Direct Numerical Simulation of a Compressible Flow and Matrix-Free Analysis of its Instabilities over an Open Cavity
ABSTRACT: This study takes a Jacobian-free approach based on the Arnoldi iteration to present a method to perform hydrodynamic instability analysis based on Direct Numerical Simulations. The method employs high order spatial and temporal discretizations for the flow simulation and has very low requirements of computational time and memory, compared to conven
J. Aerosp. Technol. Manag.. Publicado em: 19/07/2018
-
3. Experimental and numerical investigation on the dumbbell-shaped specimen of concrete-like materials under tension
Abstract Mortar is an important component of concrete. It is of great significance to obtain its tensile properties accurately. The structure heterogeneity of mortar specimens is high. Specimens are prone to fracture nearby interfaces between specimens and loading plates because of the inhomogenous stress distribution during the testing, which leads that ef
Lat. Am. j. solids struct.. Publicado em: 02/07/2018
-
4. Direct Numerical Simulation Code Validation for Compressible Shear Flows Using Linear Stability Theory
ABSTRACT: In order to simulate compressible shear flow stability and aeroacoustic problems, a numerical code must be able to capture how a baseflow behaves when submitted to small disturbances. If the disturbances are amplified, the flow is unstable. The linear stability theory (LST) provides a framework to obtain information about the growth rate in relatio
J. Aerosp. Technol. Manag.. Publicado em: 07/05/2018
-
5. Investigation on the Effects of Process Parameters on Laser Percussion Drilling Using Finite Element Methodology; Statistical Modelling and Optimization
Abstract In the present research, the simulation of the Nickel-base superalloy Inconel 718 fiber-laser drilling process with the thickness of 1mm is investigated through the Finite Element Method. In order to specify the appropriate Gaussian distribution of laser beam, the results of an experimental research on glass laser drilling were simulated using three
Lat. Am. j. solids struct.. Publicado em: 2017-03
-
6. Further Investigation on the Real Rate Effect of Dynamic Tensile Strength for Concrete-Like Materials
Abstract Based on dynamic direct tensile tests, splitting tests and spalling tests, it is found that the experimental tensile strength of concrete-like materials greatly increases with loading-rate. This kind of dynamic tensile strength enhancement may be caused by the combination influence of the inertia effect, real rate effect and end friction effect (her
Lat. Am. j. solids struct.. Publicado em: 2016-01
-
7. Study of Conservation on Implicit Techniques for Unstructured Finite Volume Navier-Stokes Solvers
ABSTRACT: The work is a study of conservation on linearization techniques of time-marching schemes for the unstructured finite volume Reynolds-averaged Navier-Stokes formulation. The solver used in this work calculates the numerical flux applying an upwind discretization based on the flux vector splitting scheme. This numerical treatment results in a very la
J. Aerosp. Technol. Manag.. Publicado em: 2014-09
-
8. Effect of Fiber Optic Chromatic Dispersion on the Performance of Analog Optical Link with External Modulation Aiming at Aerospace Applications
ABSTRACT: This paper addresses the subject of fiber optic chromatic dispersion effect on the performance of analog optical link with dual-drive electro-optic Mach-Zehnder modulator, aiming at aerospace applications. Thus, a direct detection link model that emphasizes both the modulator electronic drive and the dispersion characteristic of a linear optical fi
J. Aerosp. Technol. Manag.. Publicado em: 2013-06
-
9. Vibration energy harvesting using piezoelectric transducer and non-controlled rectifiers circuits
Vibration energy harvesting with piezoelectric materials is of practical interest because of the demand for wireless sensing devices and low-power portable electronics without external power supply. For practical use of vibration energy harvester with piezoelectric materials, it is necessary to process the alternating current (AC) by using different rectifie
J. Braz. Soc. Mech. Sci. & Eng.. Publicado em: 2012
-
10. Effect of particle clusters on turbulence modulations in liquid flow laden with fine solid particles
Studies on particle distributions and interactions between the particles and the liquid turbulence are extremely significant and can help to improve efficiency of industrial processes and final product quality. In this paper, the particle distribution and the particle - turbulence interaction in the solid - liquid flow were investigated in detail by a numeri
Brazilian Journal of Chemical Engineering. Publicado em: 2011-09
-
11. Generation of gravitational waves in cosmological phase transition from quark-hadron / Geração de ondas gravitacionais na transição de fase cosmológica quark-hádron
Gravitational waves are possibly the only direct evidence to study the Early Universe in times preceding the matter-radiation decoupling. The future launch of LISA (Laser Interferometer Space Antenna) will possibly provide a precise instrument for measuring this radiation. In this work we calculate the gravitational wave background produced by the quark-hadr
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 29/10/2010
-
12. Estudo da estabilidade secundária da esteira de um cilindro em oscilação forçada. / Study of secondary stability of the wake of a circular cylinder undergoing forced oscilation.
This thesis presents the investigation of the transition to a three-dimensional flow in the wake of an oscillating circular cylinder. This is the secondary transition of the flow around a circular cylinder, while the primary transition leads to the von Kármán wake. The investigative work is performed in the Reynolds number (Re) range which occurs the secon
Publicado em: 2010