Direct Drilling
Mostrando 1-12 de 21 artigos, teses e dissertações.
-
1. Obtaining geotechnical parameters from correlations between geophysics and CPT tests in tailings dams
Abstract This article introduces a hassle-free methodology for geotechnical parameters to be obtained from correlations between geophysics and CPT field tests in tailings dams undergoing the decommissioning process, which are reasonably representative of site conditions, from the very early project stages, with extensive coverage of all impoundment parts, wi
REM, Int. Eng. J.. Publicado em: 2020-12
-
2. Experimental analysis of built-up cold-formed steel lipped channel stub column
Abstract This article reports the results of experimental tests conducted on built-up cold-formed steel (CFS) stub columns, composed of double lipped channel members connected with self-drilling screws, which will be applied as the chord members of laced columns. These experiments aim to quantify the effect of four distinct web fastener layouts on the compos
REM, Int. Eng. J.. Publicado em: 16/09/2019
-
3. Influence of Ca2+ in the rheological properties and filtration of bentonitic clay dispersions in aqueous drilling fluids
Resumo As características físico-químicas dos cátions podem ser capazes de modificar as propriedades reológicas das argilas bentoníticas, como suas cargas, tamanhos dos cátions trocáveis adsorvidos nos argilominerais, comportamentos de hidratação e diferentes intercalações com as camadas estruturais da bentonita, sendo um fator importante conside
Cerâmica. Publicado em: 06/06/2019
-
4. Investigation on the Effects of Process Parameters on Laser Percussion Drilling Using Finite Element Methodology; Statistical Modelling and Optimization
Abstract In the present research, the simulation of the Nickel-base superalloy Inconel 718 fiber-laser drilling process with the thickness of 1mm is investigated through the Finite Element Method. In order to specify the appropriate Gaussian distribution of laser beam, the results of an experimental research on glass laser drilling were simulated using three
Lat. Am. j. solids struct.. Publicado em: 2017-03
-
5. Proper orthogonal decomposition for model reduction of a vibroimpact system
The application that inspires this work is the percussion drilling. This problem has impacts and presents uncertainties. In this first analysis the focus is on the construction of an efficient reduced-order model to deal with the nonlinear dynamics due to the impacts. It is important to have an efficient reduced-order model to perform the stochastic analysis
J. Braz. Soc. Mech. Sci. & Eng.. Publicado em: 2012-09
-
6. Quantificação do crescimento radicular em perfil de solo.
RESUMO: O estudo do comportamento radicular facilita a compreensão da parte aérea da planta e do manejo do solo. O trabalho objetivou avaliar a concentração radicular através do programa Ambiente para visualização de Imagens (ENVI), em perfis culturais sob diferentes sistemas de manejo, na Embrapa Cerrados, Planaltina - DF. O experimento foi constitu�
Planaltina. Publicado em: 2011
-
7. Relationships between organic carbon fractions and physical properties of an Argentine soil under three tillage systems.
Um ensaio de campo foi feito com monocultura de milho em um solo Argiudoll tipico em Cordoba, Argentina. Avaliaram-se os efeitos de tres sistemas de cultivo: plantio direto (PD), cultivo reduzido (CR) e cultivo convencional com arado de aiveca (CC) sobre o carbono organico total (CO), carbono da biomassa microbiana (CBM), estabilidade estrutural, densidade d
Pesquisa Agropecuaria Brasileira. Publicado em: 2011
-
8. Parâmetros solo-máquina em função de doses de resíduos vegetais e profundidades de deposição de adubo em semeadura direta / Parameters of soil –machine in function of the amount of cover residues and different fertilizer deposition depths in direct drilling
O tráfego contínuo e inadequado de máquinas em solos sob semeadura direta tem provocado alterações dos atributos físicos e mecânicos dos solos, influenciando, dessa forma, na produtividade das culturas. O experimento foi conduzido na Estação Experimental Agronômica da Universidade Federal do Rio Grande do Sul, no município de Eldorado do Sul - RS,
Publicado em: 2011
-
9. Caracterização físico-hídrica e hidráulica de solos do bioma Cerrado submetidos a diferentes sistemas de preparo.
RESUMO: O plantio direto resulta em impactos positivos na conservação da água no solo. Considerando essa premissa, este trabalho teve o objetivo de avaliar as principais alterações nas propriedades físico-hídricas de solos de Cerrado, decorrentes do uso do plantio direto durante 3, 6 e 12 anos, sob condições de sequeiro e irrigado, em comparação c
Planaltina. Publicado em: 2011
-
10. Estudos de processos térmicos decorrentes da usinagem: aplicação de problemas inversos em furação / Thermal studies of cutting process. Inverse problem application in drilling
Heat generation is a common problem during any type of cutting, but particularly during a drilling due to the difficulty of conducting heat away from the cutting edge and the fact that the chips remain in contact with the tool for a relatively long time in a hole. Cutting temperatures have strongly influenced both the tool life and the metallurgical state of
Publicado em: 2009
-
11. Desenvolvimento de plataforma elíptica osseointegrável para implante dentário, guias de perfuração e técnica cirúrgica de implantação - estudo em fêmures de cães / Development of osseointegrated elliptic platform for dental implant, surgical guides and surgical technique of implantation study in femurs of dogs
The aim of this study was to develop a dental implant for use in dogs with similar format to the biradicular teeth of these animals and surgical technique for its implantation, with features that allow the osseointegration. The implant is composed of three parts, two conic threaded implants united to a conic elliptical platform by screws and implanted below
Publicado em: 2009
-
12. Evaluation of the gradient precision of the horizontal directional drilling technique for the installation of gravity sewers / Avaliação da precisão da declividade da técnica de perfuração direcional horizontal para instalações de redes de esgoto
The present work is focused on the horizontal directional drilling (HDD) method to install gravity sewers. The results of different techniques are described intending to meet the demands of gradient. Therefore, 4 experimental pilot bores were drilled simulating a section of those structures extending 30 m with HDPE pipelines of 125 mm external diameter. Thos
Publicado em: 2008