Dilatometry
Mostrando 1-12 de 52 artigos, teses e dissertações.
-
1. Sintering mechanisms of partially stabilized zirconia (TZ3Y) with ZnO and Co3O4 as sintering additives
Abstract In this work, the sintering mechanisms of 3 mol% yttria-stabilized zirconia (TZ3Y) and TZ3Y containing 0.3 wt% of ZnO or Co3O4 were analyzed by determining the apparent activation energy of sintering from dilatometry data and observing the evolution of microstructure. Dilatometry test was performed at a heating rate ranging from 5 to 20 °C/min from
Cerâmica. Publicado em: 2021-06
-
2. Study of Structural and Electric Properties of the PZT 52/48 Doped With Er+3
The scientific community has shown a growing interest in relating to the ferroelectric materials and it has made an effort to develop them. Among these several ferroelectric materials, we proposed to investigated Pb(ZrTi)O3 doped with distinct Er+3 concentrations. Our aim was to investigate how the erbium affects the PZT electrical properties. To determine t
Mat. Res.. Publicado em: 25/11/2019
-
3. Estudo comparativo entre agentes reticulantes para possível aplicação no tratamento do ceratocone
RESUMO Com o presente estudo, objetivou-se comparar a técnica padrão do CXL com o tratamento utilizando a genipina como reticulante, com e sem desepitelização da córnea. Comparou-se propriedades químicas, mecânicas e morfológicas de córneas de suínos submetidas aos tratamentos de crosslinking com riboflavina egenipina, bem como comparar a citotoxic
Matéria (Rio J.). Publicado em: 28/10/2019
-
4. Firing Behavior of the Clay Fraction of a Natural Kaolinitic Clay: Are They Different?
A comparative investigation on the firing behavior of a natural kaolinitic clay from Campos dos Goytacazes, Brazil, and its specific clay fraction was performed. The clay fraction, equivalent diameter less than 2 µm, was separated from the precursor clay by a sedimentation method. Chemical analysis, X-ray diffraction (XRD) and scanning electron microscopy w
Mat. Res.. Publicado em: 21/10/2019
-
5. Evaluation of two-step transformation in Ni-rich titanium-nickel alloys using thermal and internal friction analyses
ABSTRACT The use of Ti-Ni memory alloys covers several fields of application such as medicine, dentistry, actuators, sensors among others. Because of the thermomechanical behavior of these materials, they are an object of continuous studies and their properties are related to the occurrence of thermoelastic martensitic phase transformations. The thermal anal
Matéria (Rio J.). Publicado em: 16/09/2019
-
6. Caracterização do composto de CuCr2O4 obtido pelo método da reação de combustão em solução
RESUMO O material CuCr2O4 foi sintetizado pela reação de combustão em solução e tratado termicamente na faixa de 600 à 1100oC, afim de verificar a evolução das fases. O composto foi carcterizado estrutural e morfologicamente por meio das técnicas de Difração de Raios X (DRX), refinamentos pelo método de Rietveld, Microscopia Eletrônica de Varred
Matéria (Rio J.). Publicado em: 16/09/2019
-
7. Characterization of Li2O-Al2O3-SiO2 glass-ceramics produced from a Brazilian spodumene concentrate
Resumo Vitrocerâmicas do sistema LAS (Li2O-Al2O3-SiO2) com elevada resistência ao choque térmico foram obtidas com sucesso com o uso de um concentrado de espodumênio brasileiro como principal matéria-prima (80%-70% em massa). Duas composições (Li2O.Al2O3.nSiO2) foram produzidas com n= 2 e 4, próximas às composições estequiométricas das fases eucr
Cerâmica. Publicado em: 15/08/2019
-
8. Physicomechanical and thermal analysis of bulk-fill and conventional composites
Abstract The aim of this study was to evaluate the degree of conversion (DC) and the thermal stability of bulk-fill and conventional composite resins. Eleven composite resin samples were prepared to evaluate the DC, Vickers microhardness (VMH), mass and residue/particle loss, glass transition temperature (Tg), enthalpy, and linear coefficient of thermal expa
Braz. oral res.. Publicado em: 18/03/2019
-
9. Semi-solid Sintering of Ti6Al4V/CoCrMo Composites for Biomedical Applications
A composite of Ti6Al4V reinforced with CoCrMo particles is fabricated by conventional powder metallurgy and semi-solid sintering. Composites are fabricated by mixing 20% wt. of CoCrMo reinforcing particles into the Ti6Al4V matrix. Sintering is studied by dilatometry tests between 1050 and 1130 °C and compact characterization is performed by SEM and XRD. Mic
Mat. Res.. Publicado em: 31/01/2019
-
10. Synthetic granite composite for precision equipment structures
ABSTRACT The structure is a component that plays an extremely important role in the equipment’s performance, it must withstand efforts without compromising the function, receive and transfer heat, dampen vibrations and position the elements, as well as promote ergonomics and aesthetics. In lightweight and precision equipment’s the raw material used must
Matéria (Rio J.). Publicado em: 06/12/2018
-
11. Effect of Hot Deformation on Microstructure, Hardness and Precipitation Kinetics in a C350 Maraging Steel Modified by Titanium Addition
Maraging steels are alloys with a good balance between strength and fracture toughness. These properties are obtained by quenching and aging treatments, where the precipitation of intermetallic compounds is promoted in a martensitic matrix. In this context, this paper aims to evaluate the effect of hot deformation on microstructure, kinetics and formation of
Mat. Res.. Publicado em: 17/09/2018
-
12. Retracción química de pastas de cemento con incorporación de metacaolín
Abstract This study shows the influence of partial replacement of Portland cement by metakaolin in the hydration reactions and chemical shrinkage of cementitious pastes. For this, pastes were prepared using metakaolin replacements of 5, 10 and 20% by mass, and a reference paste, using a constant water/solid ratio of 0,5. Chemical shrinkage was measured conti
Ambient. constr.. Publicado em: 2018-09