Diesel Fuels
Mostrando 1-12 de 97 artigos, teses e dissertações.
-
1. ANÁLISE DE AMOSTRAS DE COMBUSTÍVEIS POR FOTOMETRIA, NIR PORTÁTIL E RMN DE 1H - UMA COMPARAÇÃO COM OS RESULTADOS ENCONTRADOS POR TÉCNICAS NORMATIZADAS
It has been recurring adulterations in fuels (such as gasoline, ethanol and diesel), being necessary the exploration of the use of more modern analytical techniques capable of controlling the quality of these fuels, since some regulated tests may be inefficient to detect the adulteration. Among them, it is highlighted proton nuclear magnetic resonance (1H NM
Quím. Nova. Publicado em: 2020-02
-
2. SEPARATION OF SULFUR-CONTAINING COMPOUNDS FROM DIESEL BY OXIDATION FOLLOWED BY SOLVENT EXTRACTION IN A SINGLE DROP COLUMN
Abstract Oxidative desulfurization (ODS) is an attractive complementary or alternative process for the hydrodesulfurization (HDS) process due to advantages such as mild operating conditions. In the ODS process, the sulfur-containing compounds are oxidized first to polar sulfoxide and sulfone products and then these polar compounds are separated using solvent
Braz. J. Chem. Eng.. Publicado em: 09/12/2019
-
3. Quantification and qualification of exhaust gases in agricultural diesel engine operating with biodiesel mixtures
RESUMO Motores de ciclo diesel são amplamente utilizados em máquinas agrícolas. O biodiesel oferece a possibilidade de substituição parcial ou total do diesel mineral, reduzindo assim a dependência da agricultura desse recurso não renovável e diminuindo as emissões de poluentes. O objetivo deste estudo foi avaliar as emissões de CO, NOx, SO2, CO2 e
Rev. bras. eng. agríc. ambient.. Publicado em: 09/09/2019
-
4. Nitrile rubber and carboxylated nitrile rubber resistance to soybean biodiesel
Abstract Biodiesel has been considered a suitable substitute for petroleum diesel, but their chemical composition differs greatly. For this reason, biodiesel interacts differently than petroleum diesel with various materials, including rubbers. Therefore, the resistance of some elastomers should be thoroughly evaluated, specifically those which are commonly
Polímeros. Publicado em: 15/03/2018
-
5. Evaluation of Lubricating Properties of Diesel Based Fuels Micro Emulsified With Glycerin
The mineral diesel oil sold in Brazil, due to environmental reasons; presents sulfur concentration of 10 ppm, which causes a deficiency of lubricity, since sulfur is one of the chemical species that gives a good lubricating characteristic. Poor lubricity affects performance and causes failure of engine parts. This study aimed to evaluate the use of glycerin
Mat. Res.. Publicado em: 18/12/2017
-
6. Biodiesel Glycerides from the Soybean Ethylic Route Incomplete Conversion on the Diesel Engines Combustion Process
An evaluation was made to determine the effect of the glycerides presence resulting from the incomplete conversion of soybean biodiesel produced via alkaline catalysis and ethylic route on engine performance, and emissions in formulations containing 10 and 20% (m/m) of biodiesel used as additives in base diesel with low sulfur content and cetane ratings of 4
J. Braz. Chem. Soc.. Publicado em: 2017-12
-
7. Application of Full Factorial Design to Evaluate the Effect of Different Variables on the Stability of Biodiesel:Diesel Blends under Storage Conditions
Biodiesel is obtained from a renewable source and has been used as an alternative to fossil fuels. It has unsaturated fatty acid methyl esters that can degrade due to oxidation of the double bonds. The instability of biodiesel during storage may cause problems regarding the maintenance and operation of motors. This work evaluated the effect of several variab
J. Braz. Chem. Soc.. Publicado em: 2017-10
-
8. USO DA ESPECTROFOTOMETRIA UV-VIS PARA DIFERENCIAR AS COLORAÇÕES DO BIODIESEL DE PALMA E DO CORANTE MARCADOR DE ÓLEO DIESEL
Currently, there are two mixtures of biodiesel/diesel fuel sold in Brazil: BX/S500 and BX /S10 (X = volume/volume biodiesel percentage; S500 and S10 = sulfur content in diesel fuels - 500 ppm and 10 ppm, respectively). In order to differentiate these mixtures, red dye is added to diesel oil as required by the National Agency for Petroleum, Natural Gas and Bi
Quím. Nova. Publicado em: 2017-08
-
9. PERFORMANCE OF AN AGRICULTURAL DIESEL ENGINE USING DIFFERENTS FUELS
ABSTRACT The use of fuels for agricultural Diesel engines cycle, both of mineral origin (Diesel) or vegetable and animal origin (biodiesel) can significantly alter its performance. Therefore, the aim of this study was to quantify the change in torque, power and consumption of agricultural Diesel engine fuel using minerals and vegetables fuels. It was used a
Eng. Agríc.. Publicado em: 2017-02
-
10. REMOVAL OF WATER CONTENT FROM BIODIESEL AND DIESEL FUEL USING HYDROGEL ADSORBENTS
Abstract The removal of water content present in fuels such as biodiesel and diesel is quite important to adequate the fuel to standards for commercialization and to avoid corrosion of storage tanks and injection equipment in diesel engines. In this study, hydrophilic hydrogels were employed to remove the water content in biodiesel and diesel fuel samples. T
Braz. J. Chem. Eng.. Publicado em: 2015-12
-
11. Correlation Between Fuel Lubricity and Vibration Signals Obtained in Ball-disc Analysis Using Fourier Transform
During the contact between metallic surfaces in mechanical systems, some dynamic characteristics present significant changes as the vibration signal patterns. The acquisition and characterization of these signals, by the use of Fourier Transform (FT), are non-intrusive tools in the evaluation of lubricity. This study aimed to evaluate dynamically the fuels l
Mat. Res.. Publicado em: 24/11/2015
-
12. Etched FBG written in multimode fibers: sensing characteristics and applications in the liquid fuels sector
AbstractIn this work, a refractometric fiber sensor for the liquid fuels sector is described. The use of etched FBGs produced in multimode fibers is proposed to overcome the drawbacks associated with sensing high refractive index samples employing fiber transducers. The transducer sensitivity can be tailored by adjusting the final diameter of the etched Brag
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2015-06