Dielectric Fluids
Mostrando 1-10 de 10 artigos, teses e dissertações.
-
1. Efeito da descarga de barreira dielétrica no escoamento do ar sobre um cilindro / Effect of dielectric barrier discharge on the airflow around a cylinder
Fluids in a dielectric barrier DBD glow discharge at atmospheric pressure attracted the interest of the communities of thermo and fluid dynamics as well as control. This dissertation investigates the effects of a plasma actuator operating at 8 kV and 4.4 kHz, on the Cp curve of a PVC cylinder in a low velocity airflow. The experiment was repeated with the ac
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 25/01/2012
-
2. Effect of Dielectric Barrier Discharge on the Airflow Around a Cylinder
Abstract: Fluids in a dielectric barrier glow discharge at atmospheric pressure have attracted interest from communities of thermo and fluid dynamics, as well as control. This work investigated the effects of a plasma actuator, operating at 8.0 kV and 4.4 kHz, on the pressure distribution around a polyvinyl chloride circular cylinder in low-velocity airflow.
J. Aerosp. Technol. Manag.. Publicado em: 2012-12
-
3. Ions em interfaces dieletricas de fluidos imisciveis : efeitos do tamanho ionico e curvatura interfacial / Ions at dielectric interfaces between immiscible fluids: ionic-size and interfacial-curvature effects
Obtivemos a energia livre eletrostática de íons próximos a uma interface dielétrica planar e esférica entre fluidos imiscíveis utilizando a teoria de dielétrico contínuo. Para a geometria planar, o íon foi modelado como uma esfera dielétrica com densidade de carga superficial uniforme e fixa. Para evitar a polarização de cargas na interface iôni
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 15/07/2010
-
4. The use of vegetal-based dielectric fluids in die-sink EDM processes / Utilização de fluidos dielétricos à base de óleos vegetais na usinagem por descargas elétricas por penetração
Dielectric fluids usually used in electrical discharge machining (EDM) are generally expensive, toxic and demand special storage and disposal procedures. Oil-based dielectric fluids pollute the environment and are subject to the price variations of the international market. Moreover, they are used in large quantities and discarded after short periods of time
Publicado em: 2008
-
5. Performance Evaluation of Hybrid Abrasive Jet Electrical Discharge Machining (AJEDM) / Desenvolvimento e avaliação do processo híbrido de usinagem por descargas elétricas e jato de água abrasivo (AJEDM)
A new technology in non-traditional machining that has been developed is the association of two or more machining process in only one. This worldwide tendency has been observed for more than a decade. For example, the Abrasive Electrical Discharge Grinding (AEDG), which associates the EDM process to grinding, showed good results to Metal Removal Rate (5 time
Publicado em: 2007
-
6. O legado das bifenilas policloradas (PCBs)
Polychlorinated biphenyls (PCBs) are a class of 209 chemical compounds with the molecular formula C12H10-nCl n, where 1 <= n <= 10. They were commercially produced as complex mixtures for various uses, being employed principally as dielectric fluids in capacitors and transformers. They are not easily degraded due their chemical and physical stability and ten
Química Nova. Publicado em: 2001-06
-
7. Evaluation of performance of dielectric fluids for electrical discharge machining process / Avaliação do desempenho de fluidos dielétricos no processo de usinagem por descargas elétricas
O processo de Usinagem por Descargas Elétricas é muito utilizado na usinagem de materiais de elevada dureza, que são difíceis de serem usinados por processos convencionais, além de permitir a confecção de geometrias bem complexas e de dimensões diminutas. Um dos materiais que são largamente usinados por EDM (Electrical Discharge Machining) é o aço
Publicado em: 2001
-
8. Efeito da adição de carboneto de silício em pó na geração de microtrincas e na topografia da superfície na usinada por descargas elétricas do aço-rápido ABNT M2 / Effect of the addition of silicon carbide powder on the microcrack generation and on the surface topography in electrical discharge machining of ABNT M2 high speed steel,
This work investigates surface topography and microcrack generated by electrical discharge machining in workpieces of high speed steel (ABNT M2). Three different commercial dielectric fluids are used with and without addition of silicon carbide powder. Electrodes of electrolytic copper are used in roughing operations. The microcracks are evaluated using SEM
Publicado em: 1999
-
9. Biocatalytic synthesis of acrylates in supercritical fluids: tuning enzyme activity by changing pressure.
Supercritical fluids are a unique class of nonaqueous media in which biocatalytic reactions can occur. The physical properties of supercritical fluids, which include gas-like diffusivities and liquid-like densities, can be predictably controlled with changing pressure. This paper describes how adjustment of pressure, with the subsequent predictable changes o
-
10. Dielectric constant of atomic fluids with variable polarizability
The Clausius-Mossotti function for the dielectric constant is expanded in terms of single atom and pair polarizabilities, leading to contributions that depend on both the trace and the anisotropy of the pair-polarizability tensor. The short-range contribution of the anisotropic part to the pair polarizabilities has previously been obtained empirically from l