Dgeba
Mostrando 1-12 de 57 artigos, teses e dissertações.
-
1. Evaluation of Out-of-Autoclave (OOA) epoxy system
Abstract Epoxy resins (EP) usually cure in autoclave to minimize resin voids and to achieve the desired resin/fiber ratio. Cure parameters such as temperature, vacuum and pressure levels are controlled and monitored. Aiming time and cost optimization, new out-of-autoclave (OOA) cure processes have been developed lately. This study evaluated the cure cycle an
Polímeros. Publicado em: 2017-12
-
2. Avaliação das propriedades elétricas de barras estatóricas fabricadas com resina do tipo éter diglicidílico do bisfenol F (DGEBF) contendo nanopartículas de silica
Resumo O presente trabalho visa apresentar resultados da aplicação de uma resina epóxi bisfenólica (DGEBF) à base de nanopartículas de sílica (RN) e comparar suas propriedades com a resina convencional de referência epóxi bisfenólica (DGEBA) (RE), atualmente utilizada. Neste sentido fabricaram-se protótipos de barras estatórica, destinadas a hidr
Polímeros. Publicado em: 04/08/2016
-
3. Effect of the hardener to epoxy monomer ratio on the water absorption behavior of the DGEBA/TETA epoxy system
Abstract The water absorption behavior of the DGEBA/TETA epoxy system was evaluated as a function of the epoxy monomer to amine hardener ratio. Weight gain versus immersion time curves were obtained and the experimental points were fitted using Fickian and Non-Fickian diffusion models. The results obtained showed that for all epoxy monomer to hardener ratios
Polímeros. Publicado em: 04/03/2016
-
4. Charpy Impact Tests of Epoxy Composites Reinforced with Giant Bamboo Fibers
The giant bamboo fiber is among the strongest in the Bambusa species with a potential for application as engineering material. Its properties have been evaluated but there is limited information on the impact resistance of epoxy composites incorporated with giant bamboo fibers. Therefore, this study evaluated the Charpy impact energy of epoxy matrix composit
Mat. Res.. Publicado em: 04/12/2015
-
5. Hybrid Nanocomposites Based on Epoxy/silsesquioxanes Matrices Reinforced with Multi-walled Carbon Nanotubes
The aim of this work was the synthesis of hybrid organic-inorganic epoxy-copolysilsesquioxane nanocomposites reinforced with multi-walled carbon nanotubes (MWCNT). Copolysilsesquioxanes oligomers from 3-aminopropyltriethoxysilane (APTES) and phenyltriethoxysilane (PTES) precursors have been synthesized by a sol-gel process and chemically incorporated to an e
Mat. Res.. Publicado em: 24/11/2015
-
6. Mechanical properties of epoxy resin based on granite stone powder from the Sergipe fold-and-thrust belt composites
This paper studies the mechanical properties including traction, flexion, compression, and hardness characteristics of a composite made from the combination of epoxy resin and granitic stone powder from the fold-and-thrust belt located in the municipality of Nossa Senhora da Glória, in the state of Sergipe, Brazil. Chemical and mineralogical analyses of the
Mat. Res.. Publicado em: 04/07/2014
-
7. Proton conductive membranes based on poly (styrene-co-allyl alcohol) semi-IPN
The optimization of fuel cell materials, particularly polymer membranes, for PEMFC has driven the development of methods and alternatives to achieve systems with more adequate properties to this application. The sulfonation of poly (styrene-co-allyl alcohol) (PSAA), using sulfonating agent:styrene ratios of 2:1, 1:1, 1:2, 1:4, 1:6, 1:8 and 1:10, was previous
Polímeros. Publicado em: 10/06/2014
-
8. AFM and XRD characterization of silver nanoparticles films deposited on the surface of DGEBA epoxy resin by ion sputtering
In this work, silver atoms were deposited by ion sputtering on the surface of diglycidyl ether of bisphenol A (DGEBA) epoxy resin cured at 150 °C for 6 hours in air. The films of DGEBA and its precursors were characterized by Raman spectroscopy to identify the main functional groups and their relationship with the deposited silver atoms. Silver thin films o
Polímeros. Publicado em: 01/02/2013
-
9. Influence of hydroxypropyl cellulose on molecular relaxations of epoxy-amine networks
A dynamic mechanical analysis (DMTA) study was conducted on epoxy-amine networks crosslinked in the presence of low contents of hydroxypropyl cellulose (HPC). The epoxy resin chosen was diglycidylether of bisphenol-A (DGEBA) and the crosslinker was 4,4'-diaminodiphenylmethane (DDM). In the glassy region, primary (α) and secondary (β, γ) relaxations origin
Polímeros. Publicado em: 01/02/2013
-
10. Efeito da irradiação gama nas propriedades mecânicas e térmicas de redes DGEBA/amina cicloalifática com potencial para aplicações médicas
Este trabalho apresenta uma caracterização de sistemas epoxídicos a base do éter diglicidílico do bisfenol A (DGEBA), curado com dois co-monômeros do tipo amina cicloalifática - piperidina (Pip) e 4,4'-diamino-3,3'-dimetildiciclohexilmetano (3DCM) - antes e após a aplicação de irradiação com raios gama. Variações nas propriedades mecânicas e t
Polímeros. Publicado em: 2013
-
11. Nanocompósitos de matriz epoxídica com reforços produzidos a partir do grafite natural
O grafite é a fonte mais abundante e de baixo custo para obtenção de grafeno. Para sua produção e aplicação em nanocompósitos em escala industrial, o método de redução do óxido de grafite (OG) tem sido o mais utilizado. A oxidação do grafite promove a introdução de grupos funcionais na sua estrutura lamelar que causam o afastamento dos planos
Matéria (Rio J.). Publicado em: 2013
-
12. PREPARAÇÃO, CARACTERIZAÇÃO E COMPORTAMENTO MECÂNICO DE COMPÓSITOS HÍBRIDOS À BASE DE RESINA EPÓXI/FIBRA VISANDO À PRODUÇÃO DE JUNTAS POR ENROLAMENTO FILAMENTAR. / PREPARATION, CARACTERIZATION AND MECHANICAL BEHAVIOUR OF HYBRID COMPOSITE FOR THE PRODUCTION OF JOINTS BY FILAMENT WINDING.
As junções representam uma descontinuidade na homogeneidade do material que resulta em tensões localizadas, onde frequentemente se inicia a falha, tornando-se inevitável sua introdução em sistemas de tubulação. O uso extensivo de materiais compósitos em sistemas de tubulação ainda é limitado. E isso se deve à necessidade do estudo de materiais c
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 28/03/2012