Destructive Measuring
Mostrando 1-12 de 15 artigos, teses e dissertações.
-
1. Response of the TDR sensor to moisture under different types of management of a typical Latosol in the Cerrado
RESUMO A técnica de Reflectometria no Domínio do Tempo (TDR) tem se destacado na avaliação da umidade do solo, por ser um método instantâneo, não destrutivo, preciso e pouco dependente dos fatores ambientais. Porém, pesquisadores têm enfatizado a necessidade de calibração específica e contínua para cada condição de manejo do solo. Portanto, ob
Rev. Ciênc. Agron.. Publicado em: 2019-03
-
2. ANALYSIS OF ELASTICITY IN WOODS SUBMITTED TO THE STATIC BENDING TEST USING THE PARTICLE IMAGE VELOCIMETRY (PIV) TECHNIQUE
ABSTRACT The most important parameter in terms of material mechanical behavior knowledge is the modulus of elasticity, being traditionally obtained through destructive tests. The objective of this study is the verification of the potential use of the particle image velocimetry technique (PIV) as a tool to obtain the modulus of elasticity in sawed wood sample
Eng. Agríc.. Publicado em: 2018-04
-
3. Simulação da propagação de ondas ultrassônicas longitudinais em materiais estruturais aeroespaciais / Simulating the propagation of longitudinal ultrasonic waves in aerospace structural materials
The use of composite materials in the aerospace industry is increasing due to its low ratio between density and mechanical strength. To perform non-destructive testing using ultrasound, it is necessary to know the sound velocity in these materials. It is not always possible to manufacture physical prototypes during the development of a project because of tim
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 10/08/2012
-
4. Avaliação da influência da origem e do tratamento dos agregados reciclados de resíduos de construção e demolição no desempenho mecânico do concreto estrutural. / Evaluate the influence of origin and processing of recycled aggregates from construction and demolition waste on the mechanical performance of structural concrete.
A cadeia da construção civil é uma grande causadora de impactos ambientais, pois além do alto consumo de recursos naturais gera também grandes quantidades de resíduos. Isto traz elevados custos à sociedade pela necessidade de remoção e destinação dos resíduos, normalmente depositados em aterros. A reciclagem tem sido uma alternativa para reduçã
Publicado em: 2010
-
5. Estudo estrutural de nanossistemas semicondudores e semicondutores implantados por difração de raios-X de n-feixes / Structural study of semiconductors nanosystems and implanted semiconductors by means of n-beams X-ray diffraction
In this paper, X-ray multiple diffraction (MD) associated with the advantages of synchrotron radiation appears as a high-resolution microprobe and it is used to obtain relevant contributions to the study of structural properties of semiconductor materials, as they present themselves nanosystems epitaxial or implanted with ions. The study and detection of neg
Publicado em: 2010
-
6. Modelos MatemÃticos para Estimativa da Ãrea Foliar de um Cafeeiro por Meio de AnÃlise de Imagens / Estimation models of leaf area in a coffee tree using image analysis.
One feature of most horticultural crop plants that is biologically relevant to their yield and productivity is total leaf area. However, the direct methods of estimation of the leaf area cause damages to the plants and are time consuming, whereas the indirect methods based on image analysis, which are non-destructive, demand accuracy in the set up of the mea
Publicado em: 2009
-
7. EstimaÃÃo de ParÃmetros GenÃticos, FenotÃpicos e Ambientais para a Qualidade da Madeira de Eucalyptus em Ãrvores Vivas. / Estimation Of Genetic, Phenotypic And Environmental Parameters For Eucalyptus Wood Quality In Living Trees.
The evaluation of the technological characteristics of wood, in most times, is accomplished through destructive methods. But, that process make it impossible the evaluation of a large number of genetic materials. So, the utilization of non-destructive methods makes it possible to evaluate a large amount of trees, allowing a more intensive selection of trees
Publicado em: 2007
-
8. In vitro fluid filtration evaluation of intracoronal sealing ability of three materials used as secondary barrier / Avaliação in vitro da capacidade de selamento coronário de três materiais usados como barreira adicional, em dentes tratados endodonticamente, obturados com diferentes cimentos endodônticos, utilizando o método de filtração de fluído
Great part of endodontic treatment fails because of failures in provisory or definitive restoration, permiting a coronal microleakage. For these reasons, in last years, there is a preocupation in sealing intra-coronal cavity after the treatment, to have in view a longer longevity. So many materials are being used for this purpose. Recently it has been develo
Publicado em: 2007
-
9. Ultrasonic characterization of composite materials. / Caracterização de materiais compostos por ultra-som.
In this work, two ultrasonic non destructive techniques were implemented in a water tank and used to determine the elastic constants of glass-epoxy composites samples. The first is the through-transmission technique implemented with a pair of ultrasonic transducers. The second is the back-reflection technique that uses a single transducer in pulse-eco mode.
Publicado em: 2006
-
10. Obtenção e avaliação de bixina a partir de extrato de urucum (Bixa orellana L.)
Purified dark red extract of bixin was obtained from crude extract of annatto (Bixa. orellana L.) This natural colorant was obtained by acid and alkaline precipitation of the crystals of bixin. The stability of the pigment was studied as a function of temperature (105°C) and as well ligth as critical moisture from the extracts. Crude extract of annatto was
Publicado em: 1994
-
11. Obtenção e avaliação de curcumina a partir de rizomas secos de curcuma (Curcuma longa L.)
An investigation was undertaken to obtain the natural colorant - curcumin, of yellow colour, from rhizomes of turmeric (Curcuma longa L.). The colorant was obtained as turmeric oleoresin and crystals of curcumin. The stability of turmeric oleoresin and curcumin was studied in function of the effects of temperature (50°C to 125°C), pH (2,4 to 7,7) and light
Publicado em: 1993
-
12. Novel Methods of Measuring Hydraulic Conductivity of Tree Root Systems and Interpretation Using AMAIZED (A Maize-Root Dynamic Model for Water and Solute Transport).
Steady-state and dynamic methods were used to measure the conductivity to water flow in large woody root systems. The methods were destructive in that the root must be excised from the shoot but do not require removal of the root from the soil. The methods involve pushing water from the excised base of the root to the apex, causing flow in a direction opposi