Design Production Process
Mostrando 25-36 de 408 artigos, teses e dissertações.
-
25. PRODUCTION OF FATTY ACID METHYL ESTERS FROM AN OLIVE OIL INDUSTRY WASTE
ABSTRACT This work studies the synthesis of fatty acid methyl esters (FAME) using crude olive pomace oil as raw material and zinc stearate as catalyst. Pomace oil is a non-edible by-product of olive oil production. The oil was characterized. In order to reduce the plant pigment content in the oil, the liquid was contacted with a modified clay. An experimenta
Braz. J. Chem. Eng.. Publicado em: 15/07/2019
-
26. PRODUCTION AND CHARACTERIZATION OF PRECIPITATED SILICA FROM PALM OIL MILL FLY ASH USING CO2 IMPREGNATION AND MECHANICAL FRAGMENTATION
ABSTRACT In this research, sol-gel precipitation using CO2 impregnation and mechanical fragmentation method was applied to produce precipitated silica from Palm Oil Mill Fly Ash (POMFA). Carbon dioxide (CO2) was used in order to reduce the cost of the process and to enable sodium hydroxide recovery. The precipitation process was done in a stirred temperature
Braz. J. Chem. Eng.. Publicado em: 15/07/2019
-
27. A leitura da capa do livro Brincando de inventar na perspectiva da gramática do design visual
RESUMO Este trabalho visa analisar, à luz da Gramática do Design Visual proposta por Kress e van Leeuwen (1996), a organização e a composição imagética da capa do livro de literatura infantil Brincando de inventar. O livro selecionado compõe a coleção Paic, prosa e poesia, que é distribuída em todas as escolas do ensino fundamental da rede públi
Rev. bras. linguist. apl.. Publicado em: 04/07/2019
-
28. Factorial design to obtain magnetized poly(ethyl acrylate-co-divinylbenzene)
Abstract Magnetized polymers are produced by incorporating magnetic particles in a polymeric matrix. This article describes the use of the suspension polymerization technique using ethyl acrylate and divinylbenzene as monomers, in the presence of heptane and/or toluene as diluent, initiated by free radicals. To produce the polymer, we first performed fractio
Polímeros. Publicado em: 04/07/2019
-
29. Integrating Science, Technology, Engineering and Mathematics contents through PBL in an Industrial Engineering and Management first year program
Abstract Paper aims This paper presents teachers and students perspectives of integration Science, Technology, Engineering and Mathematics (STEM) courses contents into the first year of Industrial Engineering and Management (IEM) program through Project-Based Learning (PBL). Originality These perspectives provide strategies that IEM teachers could use to c
Prod.. Publicado em: 27/06/2019
-
30. Evaluation of the process conditions for the production of microbial carotenoids by the recently isolated Rhodotorula mucilaginosa URM 7409
Resumo Este estudo teve como objetivo melhorar as condições físicas e nutricionais do processo de produção de carotenoides pela recém-isolada Rhodotorula mucilaginosa, uma levedura basidiomiceta vermelha. A melhoria da bioprodução de carotenoides foi obtida pela técnica de delineamento experimental, alterando as características dos processos [agita
Braz. J. Food Technol.. Publicado em: 27/06/2019
-
31. INSTRUCTIONAL DESIGN FOR NURSING CARE TO NEONATES WITH CONGENITAL HEART DEFECTS
RESUMO Objetivo: desenvolver e validar design instrucional para o cuidado clínico de Enfermagem aos neonatos com cardiopatias congênitas em maternidades, por meio de educação a distância. Método: pesquisa metodológica, aplicada, constituindo-se de cursoon-line, para enfermeiros de unidades neonatais. No desenvolvimento do design instrucional efetivo
Texto contexto - enferm.. Publicado em: 10/06/2019
-
32. Produção e purificação integrada de protease fibrinolítica de Mucor subtilissimus UCP 1262
RESUMO As enzimas fibrinolíticas podem ser obtidas de micro-organismos por meio de processos fermentativos. O presente trabalho teve como objetivo avaliar a produção e extração integrada da protease fibrinolítica de Mucor subtilissimus UCP 1262 usando sistema de duas fases aquosas (SDFA). O processo integrado foi realizado para avaliar a produção, pa
Arq. Bras. Med. Vet. Zootec.. Publicado em: 06/06/2019
-
33. Physiological response of marandu grass seeds exposed to NPK fertilizer
RESUMO: Para facilitar o processo de semeadura de espécies forrageiras é comum a mistura de sementes com fertilizantes, seja em cultivo exclusivo, consorciado ou na implantação de sistemas integrados de produção agropecuária. Entretanto, a salinidade e acidez do fertilizante, em longos períodos de mistura, supõe-se ação deletéria na qualidade fi
Cienc. Rural. Publicado em: 30/05/2019
-
34. (RE)TRANSLATION FROM A PROCESS-ORIENTED APPROACH
Resumo O presente artigo reporta um conjunto de três estudos orientados ao processo e baseados em rastreamento ocular, cujo objetivo é explorar a tarefa de (re)tradução em três pares linguísticos diferentes (espanhol-português, francês-português e inglês-português). Estes estudos basearam-se em um design de tarefa exigindo potencial atenção aos
Cad. Trad.. Publicado em: 27/05/2019
-
35. Methyl Esters Production by Heterogeneous Catalyst Mixtures of CaO/Nb2O5 with Simulation of Analysis of Environmental Impacts
The conventional biodiesel process, although it reaches high conversion yields and productivity, faces problems related to the use of homogeneous catalysts. This work aims to study mixtures of calcium oxide (CaO) and niobium oxide (Nb2O5) as the heterogeneous catalyst. It was used a full 23 factorial design with four central points to analyze how the mass pe
J. Braz. Chem. Soc.. Publicado em: 2019-03
-
36. Assessment of shop floor layouts in the context of process plans with alternatives
Abstract Paper aims The paper seeks to compare the performance of three layouts in a make to order (MTO) production system with high product variability. Originality No previous work sought to compare job shop, cellular and virtual cell layouts in an MTO system with high product variability, with just 21 resources, a low amount. The analysis considered m
Prod.. Publicado em: 31/01/2019