Design Production Process
Mostrando 1-12 de 408 artigos, teses e dissertações.
-
1. Study of Catalytic Pyrolysis of Biomass Sorghum (Sorghum bicolor L. Moench) Using Design of Experiments and Surface Response Methodology
This study proposes a screen of variables that have an influence on the modification of the bio-oil chemical composition as a unique critical quality attribute (CQA) throughout the pyrolytic process (zeolite, ZSM-5) by using a 24 full factorial design, followed by optimization through a response surface methodology (RSM) based on central composite design (CC
Journal of the Brazilian Chemical Society. Publicado em: 2023
-
2. Short-term mine scheduling targeting stationary grades
Abstract In short-term mine planning, mining scheduling is generally defined by designing dig-lines, allocated on benches. The mined ore will be sent to stockpiles, homogenization piles, or a concentration plant. The process to design dig-lines is usually done manually, whereby multiple simultaneous mining fronts are time-consuming and labour-intensive. The
REM - International Engineering Journal. Publicado em: 2022
-
3. Designing and fabrication of a low-cost dip-coater for rapid production of uniform thin films
In this work, a self-made dip-coater equipment was developed for the fabrication of thin films. The assembly of the apparatus was carried out using simple mechanical and electronic pieces, recycle parts, and spending an inexpensive budget suitably. The production, software design, and features of the device were focused on the sol-gel dip-coating method, whi
Química Nova. Publicado em: 2022
-
4. Inbreeding depression and genetic variability of populations for green maize production
ABSTRACT The production of green maize is considerable important for various regions of Brazil. It is vital that breeding programs of public institutions seek to meet the needs of this market sector, which has a relevant social role, mainly on small properties. The aim of this study was to estimate the inbreeding depression and the genetic components (m + a
Revista Ceres. Publicado em: 2022
-
5. FEATURES AND STRATEGIES FOR SCAFFOLD DESIGN AND PRODUCTION FOR TISSUE ENGINEERING
Failure or loss of human tissues and organs due to illness or injury requires the partial or even total transplantation. Although transplantation is a successful intervention, donor availability and immune rejections represent still the main drawbacks. In addition, the fast and proper recovery of the patient is nowadays more than necessary to prevent infecti
Química Nova. Publicado em: 2022
-
6. Effects of Temperature and Concentration on the Determination of PET Viscosity
This work describes the use of experiment planning to investigate the effects of the variables temperature and concentration of the polymer solution on the viscosity test of polyethylene terephthalate (PET). For this, the response surface methodology was based on a central composite rotatable design (CCRD) to optimize the combinations of the analytical condi
J. Braz. Chem. Soc.. Publicado em: 2020-09
-
7. EVOLUÇÃO DIRIGIDA DE ENZIMAS: PEQUENAS MODIFICAÇÕES, MELHORES BIOCATALISADORES
Biocatalysis is now a mature field, both in the laboratory and industrial scale. This approach counts on enzyme high selectivity, biodegradability, elegant control over the outcome of reaction conditions and as a possible solution to address some challenges in Green Chemistry faced by synthetic organic chemists. However, many wild-type ready-to-use enzymes w
Quím. Nova. Publicado em: 2020-06
-
8. Detecting the extent of control over selection bias relating to oral health and otorhinolaryngology: cross-sectional study
ABSTRACT BACKGROUND: The authors of randomized controlled trials will usually claim that they have met the randomization process criterion. However, sequence generation schemes differ and some schemes that are claimed to be randomized are not genuinely randomized. Even less well understood, and often more difficult to ascertain, is whether the allocation w
Sao Paulo Med. J.. Publicado em: 2020-06
-
9. Dimensional design of the barometric leg of a flotation column: a key to operational stability
Abstract The inefficiency in controlling the slurry/froth interface level of a scavenger column flotation stage was severely impairing the process performance of an iron mining company, increasing the iron content in the tailings to levels above 20% and, consequently, not meeting the company's iron recovery and pellet feed production targets. Based on mass b
REM, Int. Eng. J.. Publicado em: 2020-03
-
10. ORGANIC RESIDUES IN THE COMPOSITION OF SUBSTRATES ENRICHED WITH BOKASHI BIOFERTILIZER FOR THE SUSTAINABLE PRODUCTION OF Copaifera langsdorffii SEEDLINGS
ABSTRACT One of the great challenges in the post-nursery phase is to plant seedlings in the field. It is, therefore, important to produce them to a high standard of quality aiming to achieve an economically feasible and environmentally sustainable process. For this purpose, the use of organic residues in the composition of substrates, associated with biotech
CERNE. Publicado em: 2020-03
-
11. Tacit knowledge in unstructured decision process
Abstract Purpose This paper aims to identify the expressions and flows of tacit knowledge in the unstructured decision process. In this type of process, decision-makers use not only the explicit knowledge but also aspects such as intuition, experience and other forms of tacit knowledge. The research developed a qualitative approach, through a study of multi
RAUSP Manag. J.. Publicado em: 2020-03
-
12. COMPARISON OF ARROWROOT (Maranta arundinacea) AND CASSAVA STARCH EXTRACTION IN SEPARATION, CONCENTRATION, AND PURIFICATION USING A ROTATING SIEVE UNDER WATER
ABSTRACT Brazil is home to several plant species that exhibit potential for starch extraction. The arrowroot plant stands out owing to its South American origin. Arrowroot starch is especially important for fine confectionery, which is a high-value niche market. Thus, a small producer could benefit from the high prices of arrowroot starch. However, to have c
Eng. Agríc.. Publicado em: 2020-02