Design Optimization
Mostrando 1-12 de 819 artigos, teses e dissertações.
-
1. Study of Catalytic Pyrolysis of Biomass Sorghum (Sorghum bicolor L. Moench) Using Design of Experiments and Surface Response Methodology
This study proposes a screen of variables that have an influence on the modification of the bio-oil chemical composition as a unique critical quality attribute (CQA) throughout the pyrolytic process (zeolite, ZSM-5) by using a 24 full factorial design, followed by optimization through a response surface methodology (RSM) based on central composite design (CC
Journal of the Brazilian Chemical Society. Publicado em: 2023
-
2. Multiphysics Design of High-Power Microwave Vacuum Window
Abstract This paper presents the Multiphysics Analysis of a High-Power Microwave Window for a Ka-Band Klystron providing 16MW of peak power. After the optimization of the electromagnetic performances, we analyze the effect of RF heating effect and the stress of the pressure on the window. We also analyze the multipactor effect, that is a common cause of wind
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
3. Design and Implementation of Microwave Dual-Band Pass Interdigital Filter Using an Analytical Approach
Abstract In this paper, benefiting from frequency transformation between the normalized frequency domain of low-pass prototype frequencies and the real frequency domain of the filter, a purely analytical procedure for dual-band filter design is used. The coupling matrix of the filter is analytically extracted, without the need to perform numerical optimizati
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
4. Optimum design of steel columns filled with concrete via genetic algorithm: environmental impact and cost analysis
Abstract The use of concrete-filled tubular columns as part of structural systems has steadily increased throughout the years. The growing demand for structural elements of this nature is a direct result of the possibility to use various cross-section shapes that have increased strength, along with resistance to fire and other corrosive agents. The main obje
REM - International Engineering Journal. Publicado em: 2022
-
5. TEST OF THE SCREENING AND PARAMETER OPTIMIZATION OF SWING SEPARATION SIEVE IN FIELD OPERATION
ABSTRACT The need for clarity regarding the sieving characteristics of the potato-soil mixture, as provided by the swing separating sieve of a potato digger, as well as the derived problems of low potato transportation efficiency, a high potato damage rate and low potato unearthing rate, are the main reasons for this study. Dynamic tracking technology is pro
Engenharia Agrícola. Publicado em: 2022
-
6. Short-term mine scheduling targeting stationary grades
Abstract In short-term mine planning, mining scheduling is generally defined by designing dig-lines, allocated on benches. The mined ore will be sent to stockpiles, homogenization piles, or a concentration plant. The process to design dig-lines is usually done manually, whereby multiple simultaneous mining fronts are time-consuming and labour-intensive. The
REM - International Engineering Journal. Publicado em: 2022
-
7. Unplanned dilution back analysis in an underground mine using numerical models
Abstract In underground mines, stability problems can cause unplanned dilution, increasing the costs of mining operations, such as loading, transport, crushing and grinding. This is usually dealt with by simply increasing investments with support. However, the design geometry of stopes and drifts also has a great effect on a stope’s stability. The use of e
REM - International Engineering Journal. Publicado em: 2022
-
8. Pretreatment and Enzymatic Saccharification of Water Hyacinth, Sugarcane Bagasse, Maize Straw, and Green Coconut Shell Using an Organosolv Method with Glycerol and FeCl3
A method to pretreatment of biomasses using glycerol as a green solvent was developed. Optimization of organosolv pretreatment was performed using a 23 factorial design, investigating synergism among the variables particle size (from < 0.85 to > 2.0 mm), FeCl3 concentration (0.025-0.175 mol L-1), and temperature (160-220 °C). Although the effects of the var
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
9. A Novel In Silico Monte Carlo Approach to Optimize a PSD Estimation Problem. Generation of Data Fusion Experiment Rules
ABSTRACT This article analyzes the performance of combining information from Scanning Electron Microscopy (SEM) micrographs with Static Light Scattering (SLS) measurements for retrieving the so-called Particle Size Distribution (PSD) in terms of experimental features. The corresponding data fusion is implemented using a novel Monte Carlo-based method consist
Trends in Computational and Applied Mathematics. Publicado em: 2022
-
10. Optimization of ultrasound-assisted extraction of turkish propolis and characterization of phenolic profile, antioxidant and antimicrobial activity
Abstract This study aimed to determine optimum conditions of the ultrasound assited extraction (UAS) parameters for different solvent types by using response surface methodology (RSM) and Box- Behnken design. The model parameters namely, time, temperature and ultrasound power significantly affected TPC value of the propolis extract (P < 0.05). The optimum pr
Food Sci. Technol. Publicado em: 2021-09
-
11. Multivariate Optimization Applied to the Synthesis of Meglumine Antimoniate with Low Levels of Trivalent Antimony
Meglumine antimoniate (MA) is a pentavalent antimony (SbV) drug recommended for the treatment of leishmaniasis. It is known that the trivalent antimony (SbIII) present as a residue in MA contributes to the drug side effects. In this article, multivariate optimization was used in the synthesis of MA in order to obtain a drug with low levels of SbIII. Four var
J. Braz. Chem. Soc.. Publicado em: 2021-08
-
12. Development of a Simple and Fast Procedure Based on Acid Dilution for Determination of Macro and Microelements in Guarana-Based Beverages by ICP OES
A simple analytical procedure is proposed for the direct analysis of guarana-based beverages in order to determine nutrient elements by inductively coupled plasma optical emission spectrometry (ICP OES). A Box-Behnken design, combined with Derringer’s desirability function, was applied to the simultaneous optimization of the ICP OES radiofrequency (RF), sa
J. Braz. Chem. Soc.. Publicado em: 2021-07