Dental Prosthesis Implant Supported
Mostrando 25-32 de 32 artigos, teses e dissertações.
-
25. Avaliação da precisão da adaptação de próteses sobre implantes, fundidas em monobloco, com ligas de Ni-Cr e Co-Cr e em Ti cp, antes e após soldagem a laser e após a simulação da aplicação de cerâmica / Evaluation of the precision of fit of one-piece implant-retained and supported prostheses cast in Ni-Cr and Co-Cr alloys and Cp Ti, before and after laser welding and after simulated porcelain firing cycles
O objetivo deste estudo foi avaliar o assentamento passivo de supra-estruturas de próteses fixas implanto-suportadas de três elementos, fundidas em titânio comercialmente puro e em ligas à base de Ni-Cr e Co-Cr. Para esta análise foi utilizado o método de Sheffield (EISENMAN, 1997), e as leituras foram realizadas num microscópio óptico comparador (Ni
Publicado em: 2006
-
26. Desajuste Marginal de Infra-estruturas metálicas de próteses fixas sobre implantes considerando tipos de pilares, materiais e solda a laser / Marginal misfit of metallic structures of total fixed implant supported prosthesis considering abutments, material and laser welding
A precisão da adaptação das infra-estruturas sobre pilares de implantes é objeto de inúmeros questionamentos e a literatura ainda é carente em relação à liga que possa apresentar adaptação próxima do ideal. Assim, esta pesquisa teve como propósitos: avaliar os níveis de desajustes marginais verticais (em μm) por meio de microscópio mensur
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 24/03/2005
-
27. Desajuste Marginal de Infra-estruturas metálicas de próteses fixas sobre implantes considerando tipos de pilares, materiais e solda a laser / Marginal misfit of metallic structures of total fixed implant supported prosthesis considering abutments, material and laser welding
The adaptation precision of metallic structures to implant abutments is a very questionable subject and the scientific literature lacks about the alloy that shows an adaptation closer to the ideal. This study had the proposal of: evaluating the vertical marginal misfit levels (in μm) using a digital microscope of one-piece and after laser welding metall
Publicado em: 2005
-
28. Avaliação da deformação gerada nos componentes intermediários de prótese fixa implanto-suportada com diferentes alturas, com a utilização de extensômetros lineares elétricos / Assessment of the deformation of the generated in different heights of abutments of mandibular implant-supported prosthesis, with the use of strain Gauges
Em prótese total fixa implanto-suportada as diferentes alturas dos intermediários traduzem-se em diferentes braços de alavanca aos quais os implantes são submetidos levando a um efeito de deformação dos componentes que até o momento é desconhecido. O objetivo deste trabalho foi verificar a deformação gerada em diferentes alturas de componentes inte
Publicado em: 2005
-
29. Análise da distribuição das tensões através de prótese fixa implanto-suportada e dento-implanto-suportada em hemi-mandíbulas de canis familiaris mediante o método de interferometria holográfica de dupla exposição / Stress analysis of tooth-implant and implant supported prosthesis in dog mandibles. Holographic interferometry double exposition method
Este estudo objetivou pesquisar a distribuição das tensões através de próteses fixas implanto-suportadas e dento-implanto-suportadas em hemi-mandíbulas de canis familiaris mediante o método de interferometria holográfica de dupla exposição. Três cães foram selecionados e colocados três implantes em cada um deles (hemi-mandíbula direita: um impl
Publicado em: 2005
-
30. Analise fotoelastica da distribuição de tensões induzidas por infra-estruturas implanto-suportadas apos soldagem a laser ou retificação de cilindros
This study evaluated two techniques indicated to obtain implant-supported fixed prostheses with satisfactory passive fit by means of photoelastic analysis. Two titanium casts groups were fabricated in a metallic master cast: Group I ? three frameworks fabricated by laser welded cylinder technique and Group II ? three frameworks cast in one-piece and submitte
Publicado em: 2005
-
31. A study of the correlation between marginal fit and tensions transmitted to implants by one-piece metal castings - a photoelastic analysis. / Estudo da correlação entre adaptação marginal e tensões transmitidas aos implantes por estruturas metálicas fundidas em monobloco - análise fotoelástica.
Obtaining a good marginal fit of the prosthetic components is one of the main obstacles to the success of rehabilitation with implant-supported prostheses. It is not clear, in the literature, which misfit levels are considered clinically acceptable, but it is known that the absence of a perfect and passive fit may cause inadequate tensions on the osseointegr
Publicado em: 2005
-
32. Analise do assentamento passivo de infra-estruturas implanto-suportadas obtidas pelas tecnicas do cilindro cimentado e soldado a laser
The aim of this study was to evaluate the passive fit of fixed implant supported prosthesis titanium frameworks using the cemented cylinder and laser welded cylinder techniques. Thus, in an edentulous mandibular arch, constructed with "chromium steel", five analogous were fixed, parallels, 10mm apart, center to center. Twenty master casts were obtained in de
Publicado em: 2002