Dental Alloy
Mostrando 1-12 de 56 artigos, teses e dissertações.
-
1. Effect of Etching Temperature on Surface Properties of Ti6Al4V Alloy for Use in Biomedical Applications
The objective of this study is to evaluate the surface physicochemical properties of Ti6Al4V alloy after etching with a piranha’s solution at temperatures of 25 °C, 40 °C, and 60 °C for 30 min. Scanning electron microscopy with energy-dispersive X-ray spectroscopy, optical profilometry, X-ray diffraction, and wettability analyses were used to characteri
Mat. Res.. Publicado em: 10/01/2020
-
2. Nickel–titanium instruments in endodontics: a concise review of the state of the art
Abstract: The introduction of automated instrumentation in endodontics represented a major advance in progress for this specialty, with improvements in the quality and predictability of root canal preparation and a significant reduction in procedural errors. In recent years, endodontic instruments have undergone a series of changes brought about by modificat
Braz. oral res.. Publicado em: 18/10/2018
-
3. Análisis de la forma de onda de señales de Emisión Acústica producida en ensayos de interfaces ceramo-metálicas
ABSTRACT The study of ceramic-metal interface is of special importance in odontology area by the current demand about dental prostheses, so it is very important to be more and more similar to natural teeth and with a long service life. With the aim of assessing in detail the behavior of ceramic-metal interface used in dental restorations systems, in this wor
Matéria (Rio J.). Publicado em: 19/07/2018
-
4. Cytotoxicity Analysis of Ti-7.5Mo Alloy After Biomimetic Surface Treatment to Use as Dental Materials
Titanium (Ti) and its alloys are widely used for medical and dental fields due to their excellent biocompatibility, high corrosion resistance, high specific strength and excellent mechanical properties. Different methods have been developed to improve the surface properties of titanium-based implant materials, and consequently the bone-bonding ability. The T
Mat. Res.. Publicado em: 31/08/2017
-
5. Fibroblast and pre-osteoblast cell adhesive behavior on titanium alloy coated with diamond film
It is well known that titanium alloys have mechanical strengths comparable to steels, as well as high corrosion resistance. Also, they have the advantage of promoting osseointegration, when used in medical and dental implants. This work aims to describe the adhesion properties of fibroblast and osteoblast cells on the surface of titanium aluminum vanadium al
Mat. Res.. Publicado em: 03/08/2017
-
6. In Vitro Cytotoxicity Test and Surface Characterization of CoCrW Alloy in Artificial Saliva Solution for Dental Applications
Resumo Estudos eletroquímicos, caracterização de superfície e teste de citotoxicidade in vitro foram realizados da liga CoCrW em meios de saliva artificial e NaCl 0,15 mol.L-1, com o objetivo de avaliar a sua aplicação como material de prótese dentária. Foram usadas como técnicas, curvas de polarização anódica, medidas cronoamperométricas, espec
Braz. Dent. J.. Publicado em: 2016-04
-
7. Streptococcus mutans adhesion and releasing of metallic ions in dental alloys
AIM: To evaluate the adherence of Streptococcus mutans to the surface of the amalgam and copper/aluminum alloy samples and also evaluate the release of metallic ions. METHODS: The prepared medium was changed every 72 h and analyzed by atomic absorption spectrophotometer. Samples were removed from the prepared medium at 15, 30, 48 and 60 days. RESULTS: The r
Braz. J. Oral Sci.. Publicado em: 2015-03
-
8. Evaluation of roughness and micromorphology of epoxy paint on cobalt-chromium alloy before and after thermal cycling
It has been suggested that the epoxy paint used to coat metal substrates in industrial electrostatic painting applications could also be used to mask metal clasps in removable dental prostheses (RDP). The purpose of this study was to evaluate both the influence of thermal cycling and the in vitro roughness of a surface after application of epoxy paint, as we
Braz. oral res.. Publicado em: 2013-04
-
9. Stress distribution and screw detorque analysis : influence of misfit and alloy types in cast implant retained frameworks / Avaliação das tensões e do destorque de parafusos : influência do desajuste marginal e dos tipos de metais em infraestruturas protéticas retidas por implantes
O objetivo neste estudo foi avaliar a distribuição das tensões geradas aos implantes modificados, por meio de análise extensométrica e força de destorque dos parafusos de retenção protética, de acordo com o tipo de metal da infraestrutura (Titânio comercialmente puro - Ti c.p ou Cobalto-Cromo - Co-Cr) e presença ou ausência de desajuste vertical
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 10/02/2012
-
10. Age-hardenability and related microstructural changes during and after phase transformation in an Au-Ag-Cu-based dental alloy
The aim of this study was to clarify how the microstructural changes during and after phase transformation determine the age-hardenability of an Au-Ag-Cu-based dental alloy. The rapid increase in hardness in the initial stage was the result of rapid atomic diffusion by spinodal decomposition into metastable Ag-rich' and Cu-rich' phases. The constant hardenin
Mat. Res.. Publicado em: 04/12/2012
-
11. Microstructural characterization of Ti-6Al-7Nb alloy after severe plastic deformation
The ASTM F1295/Ti-6Al-7Nb alloy present mechanical properties and biocompatibility very attractive for application in medical and dental implants. In this context, processing of these Ti-based alloys by severe plastic deformation (SPD) has been extensively reported recently. However, the mechanical properties of equal channel angular pressed (ECAP) ASTM F129
Mat. Res.. Publicado em: 16/08/2012
-
12. Influence of core-finishing intervals on tensile strength of cast posts-and-cores luted with zinc phosphate cement
The core finishing of cast posts-and-cores after luting is routine in dental practice. However, the effects of the vibrations produced by the rotary cutting instruments over the luting cements are not well-documented. This study evaluated the influence of the time intervals that elapsed between the cementation and the core-finishing procedures on the tensile
Brazilian Oral Research. Publicado em: 2012-08