Degree Of Conversion
Mostrando 1-12 de 284 artigos, teses e dissertações.
-
1. MODIFICAÇÃO QUÍMICA DO POLIPROPILENO ATRAVÉS DA INTRODUÇÃO DE GRUPOS SULFÔNICOS PARA APLICAÇÃO COMO CATALISADOR EM REAÇÕES DE ESTERIFICAÇÃO
In this work, the chemical modification of pristine polypropylene was carried out through sulfonation reactions with concentrated sulfuric acid (PPS1) and fuming sulfuric acid (PPS2), for production of heterogeneous catalysts used in esterification reactions. Fourier transform infrared spectroscopy, elemental analysis, degree of substitution and ion exchange
Quím. Nova. Publicado em: 2021-04
-
2. Oxygen Inhibition of Surface Composites and Its Correlation with Degree of Conversion and Color Stability
Resumo Este estudo investigou os efeitos da inibição de oxigênio e dos procedimentos de acabamento/polimento nas propriedades das resinas compostas. Foram avaliadas uma resina composta bulk fill e duas resinas convencionais (nanoparticulada e microhíbrida). Os espécimes foram confeccionados, variando o tratamento de superfície: controle, sem tratamento
Braz. Dent. J.. Publicado em: 2021-02
-
3. Evaluation of the physical and antifungal effects of chlorhexidine diacetate incorporated into polymethyl methacrylate
Abstract This study aimed to evaluate the physical properties and antifungal activities of polymethyl methacrylate (PMMA) acrylic resins after the incorporation of chlorhexidine diacetate salt (CDA). Methodology: First, acrylic resin specimens were fabricated with Vipi Cor® and DuraLay® resins with and without the incorporation of 0.5%, 1.0% or 2.0% CDA.
J. Appl. Oral Sci.. Publicado em: 10/01/2020
-
4. Influence of Modulated Photo-Activation on Shrinkage Stress and Degree of Conversion of Bulk-Fill Composites
Resumo O presente estudo teve como objetivo avaliar as propriedades de polimerização de materiais bulk-fill (baixa e alta viscosidade) utilizando luz contínua de alta intensidade e fotoativação intermitente em relação ao estresse de contração de polimerização e grau de conversão (DC). As seguintes resinas compostas Bulk-fill e nanohíbridas conve
Braz. Dent. J.. Publicado em: 28/11/2019
-
5. Mineral deposition promoted by resin-based sealants with different calcium phosphate additions
Abstract The aim of this study was to evaluate the influence of different calcium phosphates (CaPs) on the physical, biological, and remineralizing properties of experimental resin-based sealants (RBSs). Triethylene-glycol dimethacrylate (90wt%) and bisphenol A-glycidyl methacrylate (10wt%) were used to produce resin-based sealants. Hydroxyapatite (SHAp), α
Braz. oral res.. Publicado em: 25/11/2019
-
6. Influence of the mode of application of universal adhesive systems on adhesive properties to fluorotic enamel
Abstract The objective of this study is to compare the resin-enamel bond strength (mμSBS), in-situ degree of conversion (DC), and the enamel-etching pattern (SEM/EDX) of universal adhesive systems when applied to sound and fluorotic enamel. Ninety-eight human molars were sectioned into 4 parts and divided into 24 groups according to 1) enamel surface (sound
Braz. oral res.. Publicado em: 25/11/2019
-
7. Influence of Pre-Heating Regular Resin Composites and Flowable Composites on Luting Ceramic Veneers with Different Thicknesses
Resumo O objetivo neste estudo foi avaliar a influência do pré-aquecimento, conteúdo de carga e espessura da cerâmica na espessura da película, resistência de união ao microcisalhamento, grau de conversão e alteração de cor na cimentação de cerâmicas. Dois compósitos experimentais foram preparados (Bis-GMA / UDMA / BisEMA / TEGDMA), com diferen
Braz. Dent. J.. Publicado em: 07/10/2019
-
8. Influence of graphene oxide on ‘in situ’ preparation of nanocomposites with polyvinyl butyral
ABSTRACT In this work, polyvinyl butyral (PVB) nanocomposites reinforced with 0.5 to 2.5 wt% of graphene oxide (GO) were synthesized via ‘in situ’ polymerization. PVB was obtained by condensation of hydroxyl groups of polyvinyl alcohol (PVA) with butyraldehyde (BU) Thermogravimetric analyzes (TGA) showed the increase in the thermal conductivity of the na
Matéria (Rio J.). Publicado em: 16/09/2019
-
9. Effect of iodonium salt and chitosan on the physical and antibacterial properties of experimental infiltrants
Abstract Resinous infiltrants are indicated in the treatment of incipient carious lesions, and further development of these materials may contribute to greater control of these lesions. The aim of this study was to analyze the physical and antibacterial properties of experimental infiltrants containing iodonium salt and chitosan. Nine experimental infiltrant
Braz. oral res.. Publicado em: 15/08/2019
-
10. Influence of the composition and shades of ceramics on light transmission and degree of conversion of dual-cured resin cements
Abstract Objective Since the transmittance of ceramics can influence the degree of conversion (DC) of resin cements, ceramics composition and shade should be considered in the selection of resin cement. This in vitro study aimed to evaluate the effect of the transmittance of different composition, opacities and shades of ceramics on the degree of conversio
J. Appl. Oral Sci.. Publicado em: 29/07/2019
-
11. Obtaining and characterizing dental hybrid composites with clay or silica nanoparticles and boron-aluminum-silicate glass microparticles
Abstract The aim of the present work was the obtaining and characterization of dental hybrid composites using nanoparticles (clay or silica) and boron-aluminum-silicate microparticles. We evaluated the dispersion of the nanofillers when changing their loading among 2.5%, 5%, 10% and 25% wt. Were tested, in the above quantities, four different types of nanofi
Polímeros. Publicado em: 27/06/2019
-
12. Simple and Low-Cost Thermal Treatments on Direct Resin Composites for Indirect Use
Resumo O objetivo deste estudo foi avaliar a influência de três tratamentos térmicos adicionais de baixo custo, disponíveis no consultório dentário, nas propriedades mecânicas, químicas e ópticas de uma resina composta fotoativada indicada para restaurações diretas porém usada como restaurador indireto. A resina composta direta TPH3 (Dentsply) fo
Braz. Dent. J.. Publicado em: 03/06/2019