Crystalline
Mostrando 13-24 de 1638 artigos, teses e dissertações.
-
13. Tuning the Photocatalytic Activity of Tin Oxide through Mechanical Surface Activation
Tin oxide (SnO2) nanoparticles were synthesized by the co-precipitation method and mechanically modified by high-energy ball milling. The experimental results demonstrate that the collision with zirconia balls produces slight changes in the crystalline, electronic, morphological, and surface properties of SnO2, which lead to an increase in the redox potentia
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
14. Temporal trend in early sepsis in a very low birth weight infants' cohort: an opportunity for a rational antimicrobial use
Abstract Objective This study aimed to evaluate annual trends of early neonatal sepsis and antimicrobial use in very low birth weight infants for 12 years, as well as to identify microbiological agents, antimicrobial sensitivity profiles, and association with early neonatal death. Method This was a retrospective cohort study including 1254 very low birth w
J. Pediatr. (Rio J.). Publicado em: 2021-08
-
15. Polyamide 11 porous films by NIPS: the influence of miscibility and polymer crystalline formation in pores structure and morphology
This study described the morphology, crystallinity, thermal and mechanical characterization of Polyamide 11 (PA11) porous film prepared by non-solvent induced phase separation (NIPS) method using formic acid (FA) as solvent. In addition, the miscibility of PA11/FA/H2O system was performed to generate a ternary phase diagram. The porous films morphology was i
Quím. Nova. Publicado em: 2021-06
-
16. Silicon carbide hollow fiber membranes developed for the textile industry wastewater treatment
Abstract In order to reduce the impacts of the industrial effluent on the environment, silicon carbide hollow fiber membranes were prepared by the precipitation-immersion technique and sintered at 1450 and 1500 °C. The membranes were characterized by X-ray diffraction, their surface structure was characterized by scanning electron microscopy and atomic forc
Cerâmica. Publicado em: 2021-06
-
17. ERRATUM
This study described the morphology, crystallinity, thermal and mechanical characterization of Polyamide 11 (PA11) porous film prepared by non-solvent induced phase separation (NIPS) method using formic acid (FA) as solvent. In addition, the miscibility of PA11/FA/H2O system was performed to generate a ternary phase diagram. The porous films morphology was i
Arq. Neuro-Psiquiatr.. Publicado em: 2021-06
-
18. Dolomite-zirconia reaction sintered bonded coarse magnesia ceramics: effect of the bonding proportion
Abstract Refractory ceramic materials were manufactured, mainly composed of magnesia grains (coarse and medium fraction) and CaZrO3/MgO as a binding phase produced from the reaction sintering between CaMg(CO3)2 (dolomite) and m-ZrO2 (monoclinic zirconia), which constituted the finer fraction. Different relationships between the proportion and the size of the
Cerâmica. Publicado em: 2021-06
-
19. Editorial Comment: Luts-V: A new simplified score for assessing lower urinary tract symptoms in men
Abstract Refractory ceramic materials were manufactured, mainly composed of magnesia grains (coarse and medium fraction) and CaZrO3/MgO as a binding phase produced from the reaction sintering between CaMg(CO3)2 (dolomite) and m-ZrO2 (monoclinic zirconia), which constituted the finer fraction. Different relationships between the proportion and the size of the
Int. braz j urol.. Publicado em: 2021-06
-
20. Oxidative Stress & Male Infertility - A necessary and conflicted indissociable marriage: How and when to call for evaluation?
Abstract Refractory ceramic materials were manufactured, mainly composed of magnesia grains (coarse and medium fraction) and CaZrO3/MgO as a binding phase produced from the reaction sintering between CaMg(CO3)2 (dolomite) and m-ZrO2 (monoclinic zirconia), which constituted the finer fraction. Different relationships between the proportion and the size of the
Int. braz j urol.. Publicado em: 2021-06
-
21. Editorial Comment: Vasectomy re-reversal: effectiveness and parameters associated with its success
Abstract Refractory ceramic materials were manufactured, mainly composed of magnesia grains (coarse and medium fraction) and CaZrO3/MgO as a binding phase produced from the reaction sintering between CaMg(CO3)2 (dolomite) and m-ZrO2 (monoclinic zirconia), which constituted the finer fraction. Different relationships between the proportion and the size of the
Int. braz j urol.. Publicado em: 2021-06
-
22. Dysplasia of the fibrous sheath with axonemal and centriolar defects combined with lack of mitochondrial activity as associated factors of ICSI failure in primary ciliary dyskinesia syndrome
Abstract Refractory ceramic materials were manufactured, mainly composed of magnesia grains (coarse and medium fraction) and CaZrO3/MgO as a binding phase produced from the reaction sintering between CaMg(CO3)2 (dolomite) and m-ZrO2 (monoclinic zirconia), which constituted the finer fraction. Different relationships between the proportion and the size of the
Int. braz j urol.. Publicado em: 2021-06
-
23. Heterotopic Heart Transplant History and Concepts Cannot Be Neglected - Witnessing the History and Learning with Previous Practices
This study described the morphology, crystallinity, thermal and mechanical characterization of Polyamide 11 (PA11) porous film prepared by non-solvent induced phase separation (NIPS) method using formic acid (FA) as solvent. In addition, the miscibility of PA11/FA/H2O system was performed to generate a ternary phase diagram. The porous films morphology was i
Braz. J. Cardiovasc. Surg.. Publicado em: 2021-06
-
24. QUANTIFICAÇÃO DE MULLITA PROVENIENTE DE RESÍDUOS DE CAULIM DA REGIÃO AMAZÔNICA: USO DO MÉTODO DE RIETVELD
Mullite is used to obtain a refractory material, there are several factors that influence the synthesis process of mullite: the preparation of the mixture, the precipitation and the reaction of SiO2 and Al2O3. For the synthesis of mullite, samples of kaolin processing residues were used as precursor material, because it presents SiO2 and Al2O3 in its composi
Quím. Nova. Publicado em: 2021-04