Cracking Catalytic
Mostrando 13-24 de 63 artigos, teses e dissertações.
-
13. Development, implementation and performance evaluation of a self-tuning regulator adaptive controller applied to a FCC process / Desenvolvimento, implementação e avaliação de desempenho de um controlador adaptativo do tipo self-tuning regulator aplicado a um processo FCC
This work had as main objective the development and implementation of an selftuning regulator (STR) adaptive controller, with subsequent comparison of its performance with a PID (proportional-integral-derivative) controller and two predictive controllers, namely a predictive based on artificial neural networks (MPC-ANN) and a dynamic matrix controller (DMC).
Publicado em: 2010
-
14. Caracterização de catalisadores usados na oleoquímica
In order to improve the physical-chemical properties of bio oil from castor oil were used as catalysts silica and alumina, both pure and doped. The study showed that products from the catalytic cracking of castor oil have properties more satisfactory, especially when using alumina. This fact can be explained by higher acidity, mesoporous characteristic and s
Publicado em: 2010
-
15. Uso do resíduo de catalisador de processo de craqueamento catalítico fluído de hidrocarbonetos em refratários silicoaluminosos = use of catalyst waste from hydrocarbon fluid catalytic cracking process in alumina-silica refractories
Este trabalho objetivou o desenvolvimento de metodologia para o aproveitamento do resíduo de catalisador de craqueamento de hidrocarbonetos, na produção de refratários silicoaluminosos. Esse resíduo foi utilizado em substituição às matérias-primas convencionais, com o conseqüente ganho ambiental e econômico. Com base em composições químicas e m
Publicado em: 2010
-
16. Obtenção de diesel verde por craqueamento termocatalítico de óleo de buriti (Mauritia flexuosa L.) sobre materiais nanoestruturados do tipo LaSBA-15 / Obtenção de diesel verde por craqueamento termocatalítico de óleo de buriti (Mauritia flexuosa L.) sobre materiais nanoestruturados do tipo LaSBA-15
Com o objetivo de obter um biocombustível semelhante ao diesel mineral, materiais nano-estruturados do tipo SBA-15 com lantânio incorporado, LaSBA-15(pH), com razões molares Si/La = 75, 50 e 25, foram sintetizados em dois estágios, com ajuste do pH do gel de síntese a 6, e utilizados como sólidos catalíticos no craqueamento termocatalítico de óleo d
Publicado em: 2010
-
17. Síntese, caracterizaçao e propriedades catalicas da peneira molecular nanoestruturada modificada com lantanio
A peneira molecular nanoestruturada SBA-15 foi sintetizada pelo método hidrotérmico, e modificada com lantânio com razões molares Si/La de 25, 50, 75 e 100. Os materiais obtidos foram avaliados como catalisador para a reação modelo de craqueamento de n-hexano. Os materiais mesoporosos tipo SBA-15 e LaSBA-15 foram sintetizados utilizando tetraetilortosi
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 06/08/2009
-
18. CRAQUEAMENTO CATALÍTICO DE n-HEPTANO SOBRE ZEÓLITAS ZSM-12 COM DIFERENTES RAZÕES SiO2/Al2O3 VISANDO OBTER ADITIVOS DE BAIXO CUSTO PARA CATALISADORES DE FCC. / CATALYTIC CRACKING OF N-HEPTANE ON ZEOLITE ZSM-12 WITH DIFFERENT REASONS SIO2/AL2O3 AIMING TO GET LOW COST FOR ADDITIVES CATALYTIC FCC.
O Petróleo é de vital importância para a sociedade devido aos seus derivados com largo emprego nas atividades econômicas e principalmente sua utilização como fonte energética. A expansão econômica e social do país, nas últimas décadas, vem exigindo importante desenvolvimento da nossa infra-estrutura, notadamente no setor de energia. O petróleo q
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 27/02/2009
-
19. Hexene catalytic cracking over 30% sapo-34 catalyst for propylene maximization: influence of reaction conditions and reaction pathway exploration
Higher olefins are produced as a by product in a number of refinery processes and are one of the potential raw materials to produce propylene. In the present study, FCC model feed compound was considered to explore the olefin cracking features and options to enhance propylene using 30% SAPO-34 zeolite as catalyst in a micro-reactor. The superior selectivity
Brazilian Journal of Chemical Engineering. Publicado em: 2009-12
-
20. Production and characterization of the biofuels by cracking of vegetable oils through bauxite catalysis / Produção e Caracterização de Biocombustíveis por Craqueamento de Óleo Vegetais via Catálise com Bauxita
In this work, raw bauxite, thermally activated calcined bauxite, calcined bauxite underwent acid treatment were the catalysts tested by its potential in the thermal catalytic cracking reaction looking forward to the production of biofuels from commercial soybean oil as an alternative to fossil fuels. The materials were characterized by the techniques ICP-OES
Publicado em: 2009
-
21. Produção e Caracterização de Biocombustíveis por Craqueamento de Óleo Vegetais via Catálise com Bauxita / Production and characterization of the biofuels by cracking of vegetable oils through bauxite catalysis
In this work, raw bauxite, thermally activated calcined bauxite, calcined bauxite underwent acid treatment were the catalysts tested by its potential in the thermal catalytic cracking reaction looking forward to the production of biofuels from commercial soybean oil as an alternative to fossil fuels. The materials were characterized by the techniques ICP-OES
Publicado em: 2009
-
22. Kinetic study of the ctalytic cracking of hydrocarbons model molecules on Fcc catalysts / Estudo cinetico do craqueamento catalitico de moleculas modelo de hidrocarbonetos em catalisadores de FCC
O 1-octeno, 2,2,4-trimetil-pentano e n-octano foram utilizados como moléculas modelo para o estudo experimental e de modelagem do craqueamento catalítico na superfície de dois catalisadores comerciais (PETROBRAS), compostos por zeólita USY e matriz (SiO2-Al2O3) com impregnação de terras raras (CTR) e sem a impregnação de terras raras (STR), ambos des
Publicado em: 2009
-
23. Simulação do processo de desasfaltação de petroleo pesado para obtenção de asfaltenos e oleo lubrificante / Simulation of a heavy oil deasphalting process to obtain asphaltenes and lube oil
Petroleum deasphalting is one of the major primary processes in crude oil refining. The study of deasphalting has gained considerable attention in the last few decades due to the increase in heavy crude oil reserves. In Brazil, the majority of the explored reserves produce heavy oils. The increasing reduction in the processing of light oils, added to the inc
Publicado em: 2009
-
24. Project and assembling of pneumatic transport pilot unit in diluted phase for studying the relationship between the pressure drop and the distribution of granular particles into the cross section of industrial pipes / Projeto e montagem de unidade piloto de transporte pneumatico em fase diluida para estudo da relação entre a perda de carga e a distribuição de particulas granulares na seção transversal de dutos industriais
The pneumatic transport that involves the use of air particles to move materials through pipes is a major operation in various industries and chemical processes. Typical examples are systems for the conversion of energy from coal, catalytic cracking, drying and transport of solid and fine granular. The conventional pneumatic transport is often operated in di
Publicado em: 2009