Crack Growth
Mostrando 1-12 de 75 artigos, teses e dissertações.
-
1. Effects of Gas Nitriding on Fatigue and Crack Initiation of Ti6Al4V produced by Selective Laser Melting
Selective laser melting (SLM) is an additive manufacturing technique which permits fabrication of three dimensional parts by selectively melting consecutive layers of metallic powder. This allows the production of parts with high geometrical complexity. Titanium alloy Ti-6Al-4V (Ti64) is widely used in industry due to its high strength-to-mass ratio, corrosi
Mat. Res.. Publicado em: 15/07/2019
-
2. A Numerical Modelling of Mixed Mode Crack Initiation and Growth in Functionally Graded Materials
The main objective of this work is to present a numerical modeling of crack propagation path in isotropic functionally graded materials (FGMs) under mixed-mode loadings. The displacement extrapolation technique (DET) and the maximum circumferential stress (MCS) criterion are investigated in the context of crack growth in functionally graded beam subject to t
Mat. Res.. Publicado em: 04/04/2019
-
3. Study of cracks in concrete target under deep penetration by a projectile
Abstract A large number of cracks occur in concrete structure after projectile penetration. The study of crack distribution and propagation process is the basis of damage assessment, structural repair and high dynamic fracture mechanism. In this paper, wire saw cutting, X-ray computed tomography (X-CT) and mechanical property testing of damaged concrete were
Lat. Am. j. solids struct.. Publicado em: 14/03/2019
-
4. Multi-walled carbon nanotube reinforced polymer as a bonded repair for Al 2024-T3 fatigue crack growth
ABSTRACT The influence on multi walled carbon nanotubes (MWCNT, or simply CNT) as a reinforcement material in an epoxy resin in order to decrease the fatigue crack propagation rate in the 2024 T3 aeronautical Al alloy was studied. CT samples were pre-cracked in a resonant fatigue machine until a 4 mm pre-crack length. Four groups of samples were considered:
Matéria (Rio J.). Publicado em: 06/12/2018
-
5. A computational framework for predicting onset and crack propagation in composite structures via eXtended Finite Element Method (XFEM)
Abstract The eXtended Finite Element Method (XFEM) has been reliably used for analyzing crack growth in 3D structural elements over last years. In fact, many researchers have worked in this field, but it is scarce to find scientific contributions about 3D XFEM models applied to the failure of non-standard composite parts, such as tapered structures and thick
Lat. Am. j. solids struct.. Publicado em: 29/10/2018
-
6. Experimental Study of Fatigue Crack Behavior of Rib-To-Rib Butt Welded Connections in Orthotropic Steel Decks
Abstract Rib-to-rib (RR) butt welded connections are one of the most sensitive locations for encountering fatigue failure in orthotropic steel decks (OSDs), and numerous fatigue cracks arising from these areas have been identified in existing OSD bridges. Due to dynamic factors in their service life bridges with an orthotropic steel deck (OSD) are prone to f
Lat. Am. j. solids struct.. Publicado em: 11/10/2018
-
7. Influencia del tiempo de revenido a 780°C sobre la resistencia al creep del acero ASTM A335 P91
ABSTRACT It has been investigated the effect of tempering time at 780°C on the creep strength of ASTM A335 grade P91 steel. The tempering temperature corresponded to the industrial tempering temperature and the times evaluated were chosen in such a way to accumulate, between the tempering prior as received (40 min) and the treatment carried out in the labor
Matéria (Rio J.). Publicado em: 19/07/2018
-
8. Dynamic crack propagation of granite subjected to biaxial confining pressure and blast loading
Abstract To great understanding the dynamic crack propagation of rock under in-situ stress and blasting, the static-dynamic loading experimental platform was built. With different confining pressure (0MPa, 2MPa, 4MPa, 6MPa, 8MPa) and different ratios (K) of horizontal-to-vertical pressure (0, 0.25, 0.5, 0.75, 1), nine texts have been carried out in quadrate
Lat. Am. j. solids struct.. Publicado em: 02/07/2018
-
9. Fracture Behavior and Fatigue Performance of Inconel 625
Inconel 625 is a nickel-based highly-resistant superalloy widely used in aerospace components, in the nuclear industry, and especially in the maritime industry. Materials such as Inconel 625 have been widely used in oil exploration of Brazilian pre-salt layers due to their excellent resistance to corrosion under tension, pitting and crevice corrosion by chlo
Mat. Res.. Publicado em: 25/06/2018
-
10. Effect of grinding and aging on subcritical crack growth of a Y-TZP ceramic
Abstract This study aimed to investigate slow crack growth (SCG) behavior of a zirconia ceramic after grinding and simulated aging with low-temperature degradation (LTD). Complementary analysis of hardness, surface topography, crystalline phase transformation, and roughness were also measured. Disc-shaped specimens (15 mm Ø × 1.2 mm thick, n = 42) of a ful
Braz. oral res.. Publicado em: 03/05/2018
-
11. Effect of Interrupted Ageing and Retrogression-Reageing Treatments on Fatigue Crack Growth with a Single Applied Overload in 7050 Aluminum Alloy
The influences of interrupted ageing and retrogression and re-ageing heat treatments on fatigue crack growth with a single applied overload in 7050 aluminum alloy were investigated. The main aims were: to evaluate the influence of these heat treatment conditions on tensile properties, mainly fatigue crack growth rate and fracture process in the low-moderate
Mat. Res.. Publicado em: 19/04/2018
-
12. Investigation on Friction and Wear Properties of High-Temperature Bearing Steel 9Cr18Mo
This paper presented a study of friction and wear on 9Cr18Mo when rubbed against other materials (steel-304, steel-440C, steel-GCr15 or silicon nitride ceramic ball) at high temperature conditions. Friction and wear tests were carried out with universal a friction and wear testing machine. The wear morphology was analyzed by a Nanovea three-dimensional profi
Mat. Res.. Publicado em: 05/04/2018