Cost Of Manufacture
Mostrando 1-12 de 80 artigos, teses e dissertações.
-
1. Evaluation of Dog Food Authenticity through Lipid Profile Using GC-FID and ESI-MS
Considering the increasing number of low cost vegetable oil product adulterations, it is necessary to assess the authenticity of the lipid sources used in the dog food manufacture, consequently different brands and classifications of feed were analyzed to verify the product authenticity by gas chromatography (GC) with flame ionization detector (FID) and by e
J. Braz. Chem. Soc.. Publicado em: 2020-12
-
2. Tear down academic paywall during pandemic
Zinc hexacyanoferrate (ZnHCF) is a Prussian Blue analog and can be intercalated by both monovalent and divalent ions. ZnHCF/multi-walled carbon nanotube (MWCNT) film could be used as a cathode for zinc ions battery. Carbon nanotubes improved significantly the electrochemical performance of the electrode. It is described the preparation of ZnHCF/MWCNT films b
Braz. J. Biol.. Publicado em: 2020-09
-
3. Zinc Hexacyanoferrate/Multi-Walled Carbon Nanotubes Films for Rechargeable Aqueous Batteries
Zinc hexacyanoferrate (ZnHCF) is a Prussian Blue analog and can be intercalated by both monovalent and divalent ions. ZnHCF/multi-walled carbon nanotube (MWCNT) film could be used as a cathode for zinc ions battery. Carbon nanotubes improved significantly the electrochemical performance of the electrode. It is described the preparation of ZnHCF/MWCNT films b
J. Braz. Chem. Soc.. Publicado em: 2020-09
-
4. Aplicação da técnica de CAMQL na retificação cilíndrica externa do aço AISI 4340 utilizando rebolo de CBN
RESUMO O processo de retificação possui como características o bom acabamento superficial e alta precisão dimensional e geométrica. Assim, peças usinadas por este processo possuem um alto valor agregado por se tratar de um processo de acabamento que é comumente realizado nas últimas etapas da fabricação. Um fator limitador do processo de retificaç
Matéria (Rio J.). Publicado em: 16/09/2019
-
5. Residuos de desmote de algodón aglomerados: su producción y aplicación en la construcción de viviendas
Abstract The feasibility of producing blocks and boards through the agglomeration of cotton ginnig process waste with calcium binders was proven in previous studies. This waste represents a serious problem for ginning plants, which annually produce a high amount of waste without final destination, as is the case in Argentina. The variability of the annual co
Ambient. constr.. Publicado em: 10/06/2019
-
6. Characterization of coal briquettes using tar as a binding material for use in a coke oven
Abstract In order to increase competitiveness in the steel industry through reduction of the cost of coal mixtures and increase in the quality productivity of coke in the oven, this research was developed with the aim of increasing the bulk density through briquetting of low power coking coal using tar as a binding material. Initially an industrial scale dou
REM, Int. Eng. J.. Publicado em: 2019-03
-
7. Metodología para la fabricación de una prótesis transtibial a base de material compuesto de fibra de carbono y resina epóxica
ABSTRACT The problematic of handicap people, especially amputees, significantly impacts to the society. Existing prosthesis gives solutions that discourage amputee’s expectations; high costs are not often accessible for most of them. This research includes a methodology for construction of a prototype mold for manufacturing a generic foot prosthetic, Whose
Matéria (Rio J.). Publicado em: 19/07/2018
-
8. Functional outcomes and quality of life after transobturatory slings: hand - made vs. commercial slings
ABSTRACT Surgical correction is the most efficient treatment for stress urinary incontinence (SUI), and transobturator sling (TO) has optimal results. The high cost of commercially available sling kits makes it difficult the access in most Brazilian public health services. Hand-made polypropylene slings, on the other hand, have been previously reported. The
Int. braz j urol.. Publicado em: 2018-06
-
9. Paper-Based Microfluidics Immunoassay for Detection of Canine Distemper Virus
ABSTRACT Paper-based devices present low-cost and are versatile, making them very attractive for clinical analysis. To manufacture those devices wax patterns are printed on paper surface and upon heating the wax permeates through the entire thickness of the paper, creating hydrophobic barriers that delimit test areas. Antibodies produced in rabbits against c
Braz. arch. biol. technol.. Publicado em: 08/01/2018
-
10. Manufacturing and Characterization of Jute/PP Thermoplastic Commingled Composite
The commingled technology is a promising technique for the manufacture of composites reinforced with natural fibers. This study presents the development, processing and basic characterization of a long fiber Jute/Polypropylene (Jute/PP) commingled composite. The Jute/PP fabric was produced in a handloom and the composite was consolidated by compression moldi
Mat. Res.. Publicado em: 19/10/2017
-
11. Development of a Material for Manufacturing a Mold for Plastic Injection
Injection molding is a process used to manufacture high volumes of plastic containers of complex geometric shapes. Although CuBe has always been used, there are currently some alternative alloys such as the CuNiSiCr alloy that has lower manufacturing cost and similar properties. The objective of this paper is to characterize, by techniques of microscopy, the
Mat. Res.. Publicado em: 07/08/2017
-
12. Application of optimization for improvement of the efficiency of louvered-fin compact heat exchangers
Abstract A few decades ago, the product development process was just based on a trial and error procedure, and the designer's experience. The need for a new way to design and manufacture more economical and sustainable products corroborates increasingly to a new vision of how to create new products for the benefit of society. Modern numerical tools allow gre
REM, Int. Eng. J.. Publicado em: 2016-09