Corrosion Products
Mostrando 1-12 de 70 artigos, teses e dissertações.
-
1. Effect of Multi-Pass Rolling on the Performance of AZ31 Magnesium Alloy Anode in Mg-Air Battery
In this work, the influence of rolling passes on microstructure, corrosion behavior, electrochemical performance, and battery performance of AZ31 magnesium alloy was studied. The experimental results show that the grain size decreases first and then increases with rolling passes. Among them, the grain size of three passes rolled sample is the smallest, while
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
2. ROBÓTICA EDUCACIONAL, ENSINO DE QUÍMICA E APRENDIZAGEM COOPERATIVA: UMA PROPOSTA PARA O CURSO DE ENSINO SUPERIOR EM ENGENHARIA CIVIL
Students, generally, are afraid of studying chemistry because they understand that it is a very complex area of knowledge and that it doesn’t has use in daily lives and in intended profession, which is a problem we identified in a Civil Engineering course. With this, we proposed a project in this course, based on educational robotics and educational cooper
Química Nova. Publicado em: 2022
-
3. Characterization and Comparative Analysis of Corrosion Resistance of 4 High Manganese Steels Models in Aqueous Solution of NaCl
The liquefied natural gas volumes that currently need to be stored and/or transported require engineering to consistently develop materials that combine high mechanical strength and low manufacturing costs. The present work brings the study of four models of high manganese steels (non-commercials), to demonstrate the feasibility of being used in the petroche
Mat. Res.. Publicado em: 09/12/2019
-
4. NANOESPECTROSCOPIA DE ABSORÇÃO DE RADIAÇÃO SÍNCROTRON NO INFRAVERMELHO PARA NANOESPECIAÇÃO DE PRODUTOS DE CORROSÃO METÁLICA
The understanding of chemical and physical behavior of materials, especially metals and their alloys, is of utmost importance for industrial and technological applications, development of new materials and preservation of cultural heritage. The use of complementary analytical techniques has allowed a better understanding of corrosion mechanisms, and results
Quím. Nova. Publicado em: 05/12/2019
-
5. The influence of Cu content on high temperature corrosion behavior of heat - resistant molten salt steel
ABSTRACT This work studies the high temperature corrosion behavior of new heat-resistant steel with salt coating method of 75%Na2SO4+25%NaCl coating on the steel surface at 700ºC. The chemical composition of corrosion products and surface morphology of the corrosion layer were analyzed using X-ray diffractometer (XRD), scanning electron microscopy (SEM), en
Matéria (Rio J.). Publicado em: 16/09/2019
-
6. Aço carbono 1040 como indicador de agressividade do solo e da pasta de cimento em sistemas de ancoragem de linhas de transmissão
RESUMO O encapsulamento de hastes de âncora em pasta de cimento reduz o contato dos materiais metálicos com os ambientes agressivos, em torres estaiadas de linhas de transmissão de energia elétrica. Contudo, ainda são reportados casos de falha prematura devido à corrosão do sistema de ancoragem. O íon cloreto é considerado um dos principais respons�
Matéria (Rio J.). Publicado em: 16/09/2019
-
7. Effects of Gas Nitriding on Fatigue and Crack Initiation of Ti6Al4V produced by Selective Laser Melting
Selective laser melting (SLM) is an additive manufacturing technique which permits fabrication of three dimensional parts by selectively melting consecutive layers of metallic powder. This allows the production of parts with high geometrical complexity. Titanium alloy Ti-6Al-4V (Ti64) is widely used in industry due to its high strength-to-mass ratio, corrosi
Mat. Res.. Publicado em: 15/07/2019
-
8. Quality analysis of galvanized pipes applied to natural gas installations in civil construction
ABSTRACT Some natural gas distributors for residential and commercial buildings in Brazil use galvanized steel tubes and fittings manufactured by the hot-dip zinc process that are supported by the specifications contained in the Brazilian Standards. Zinc coating is one of the most widely used methods to provide protection against corrosion. It is therefore e
Matéria (Rio J.). Publicado em: 10/06/2019
-
9. Microbiologically-Influenced Corrosion of 1020 Carbon Steel in Artificial Seawater Using Garlic Oil as Natural Biocide
This work aims evaluate the use of biocides in the microbiologically-influenced corrosion (MIC) of AISI 1020 carbon steel by sulfate-reducing bacteria (SRB) in artificial seawater. A natural biocide (garlic oil) and a commercial biocide (glutaraldehyde) were used to control the corrosion caused by these bacteria in artificial seawater. Microbial growth on th
Mat. Res.. Publicado em: 30/05/2019
-
10. Corrosion of galvanic pairs of dental alloys copper base with silver amalgams in artificial saliva
ABSTRACT Galvanic corrosion is a metal dissolution process that occurs when two metals of different electrochemical potential are immersed in an electrolyte causing electrical currents between the metals through the conducting medium. To restore lost or damaged teeth, different alloys are used, leaving the mouth exposed to electrical currents that circulate
Matéria (Rio J.). Publicado em: 20/05/2019
-
11. Evaluation of Corrosion Resistance of Commercial Aluminum Alloys in Ethanol Solutions
In the present research, we studied the corrosion resistance of commercial aluminum alloys exposed to ethanol produced in the northeastern region of Argentina and to commercial ethanol as reference medium. Electrochemical tests of potentiodynamic polarization and weight loss were performed by immersion at temperatures below the boiling point of ethanol (25 �
Mat. Res.. Publicado em: 22/10/2018
-
12. Corrosión atmosférica acelerada en una fundición gris ASTM A48
ABSTRACT Due to the long times required to investigate atmospheric corrosion resistance of metals, data on the subject is scarce. One of these studies is the one made by Southwell et al., where the effect of corrosion in a cast gray iron during 16 years was studied in various environments. This research shows and discusses the behavior of cast gray iron when
Matéria (Rio J.). Publicado em: 19/07/2018