Cordierite
Mostrando 1-12 de 12 artigos, teses e dissertações.
-
1. Effect of sintering temperature on mechanical and bioactivity properties of bioactive glass and cordierite composite
Abstract In this study, a composite of bioactive glass (BG) and cordierite (BG-cord) was proposed to increase the strength and bioactivity of BG. Both BG and cordierite were separately synthesized with the method of glass melting, then, they were used to fabricate BG-cord with a variation of sintering temperature (600 to 1000 °C). The highest diametral tens
Cerâmica. Publicado em: 2022
-
2. REMOVAL OF NITRATE FROM DRINKING WATER BY USING PdCu STRUCTURED CATALYSTS BASED ON CORDIERITE MONOLITHS
Abstract Structured catalysts were prepared, characterized and evaluated in NO3 - removal from drinking water. Different suspensions containing a previously optimized PdCu/5wt% ZrO2-Al2O3 powder catalyst (hereinafter PdCu/5ZAp) were prepared and deposited on cordierite monoliths by washcoating. The effect of suspension concentration, the particle size, the i
Braz. J. Chem. Eng.. Publicado em: 30/09/2019
-
3. Electron microprobe Th-U-Pb monazite dating and metamorphic evolution of the Acaiaca Granulite Complex, Minas Gerais, Brazil
Abstract The Acaiaca Complex (AC) is located in southeastern Minas Gerais state, and comprises felsic, mafic, ultramafic, and aluminous granulites as well as lower grade gneisses and mylonites. The complex is distributed over an area of ca. 36 km by 6 km, surrounded by amphibolite facies gneisses of the Mantiqueira Complex (MC). The discrepancy in the metamo
Rem: Rev. Esc. Minas. Publicado em: 2016-03
-
4. Efeito da ativação mecânica de uma formulação de talco/caulim/alumina sobre o mecanismo e a cinética de formação de cordierita
In this study, the influence of mechanical activation by intensive ball milling of a stoichiometric mixture of talc, kaolin, and alumina on the mechanism and kinetics of cordierite (2MgO·2Al2O3·5SiO2) formation was evaluated. The raw materials were characterized by chemical analysis, X-ray diffraction (XRD), laser diffraction, and helium pycnometry. The ki
Quím. Nova. Publicado em: 2014-04
-
5. Preparation and properties of nanophase (Ce, Zr, Pr)O2-doped alumina coating on cordierite ceramic honeycomb for three-way catalysts
Nanophase (Ce, Zr, Pr)O2-doped alumina coatings were prepared by impregnating the cordierite ceramic honeycomb in the sol or in the slurry of already calcined powder, respectively. The effects of preparation methods on the crystal phase, texture, oxygen storage capacity (OSC), reducibility, surface morphology and thermal stability of coatings were investigat
Brazilian Journal of Chemical Engineering. Publicado em: 2012-03
-
6. Diesel/biodiesel soot oxidation with ceo2 and ceo2-zro2-modified cordierites: a facile way of accounting for their catalytic ability in fuel combustion processes
CeO2 and mixed CeO2-ZrO2 nanopowders were synthesized and efficiently deposited onto cordierite substrates, with the evaluation of their morphologic and structural properties through XRD, SEM, and FTIR. The modified substrates were employed as outer heterogeneous catalysts for reducing the soot originated from the diesel and diesel/biodiesel blends incomplet
Química Nova. Publicado em: 2011
-
7. Conformação de monolitos cerâmicos de cordierita via eletroforese
A técnica de conformação eletroforética é apresentada como uma alternativa viável para a produção de monolitos cerâmicos de cordierita. A matriz utilizada para a conformação das estruturas cerâmicas contém 109 condutos em paralelo. Os monolitos produzidos foram ensaiados quanto à área superficial, porosidade e resistência mecânica. Demonstra
Publicado em: 2010
-
8. Selective reduction of NOx by propylene over silver catalyst under oxidative conditions
Neste trabalho foram estudados catalisadores Ag/Al2O3 e Ag/Al2O3/Corderita, preparados por um método de impregnação convencional, na reação de redução de NO utilizando propeno como agente redutor. Os catalisadores foram caracterizados por redução a temperatura programada (RTP), quimissorção de oxigênio e área superficial, pelo método BET. A ati
Publicado em: 2010
-
9. Estudo das características morfológicas texturais e estruturais dos catalisadores automotivos, síntese e caracterização de filmes alternativos
The structural, morphological and textural changes of new and used automotive catalysts heated at temperatures between 500 and 1000°C were investigated. The catalysts were thermally characterized on simultaneous thermogravimetric and differential thermal analysis (TG-DTA) equipment performed in air and N2. Morphological changes were observed by scanning ele
Publicado em: 2010
-
10. PETROGÊNESE DO COMPLEXO ACAIACA, MG
The Acaiaca Complex (AC) is composed of mainly granulite facies rocks distributed along the Acaiaca county and surroundings, east of the Quadrilátero Ferrífero. The present work aimed to investigate the lithological diversity of the AC with emphasis on the mineralogical, microstructural, geochemical and petrogenetic characterization. The lithostructural su
Publicado em: 2009
-
11. Sinteses de cordierita por sol-gel utilizando TEOS ou acido silicico : a influencia do acido citrico na cristalização
Cordierite (2MgO.2Al2O3.5SiO2) is a strategically important glass-ceramics with interesting mechanical, thermal and chemical properties. The addition of organic acids on ceramic material precursors obtained by sol-gel synthesis has been reported. Additives can modify temperature and rate of cordierite crystallization, as well as the crystalline phase yeld. T
Publicado em: 2003
-
12. Evaluacion termica, mecanica y electrica de materiales compuestos cordierita-mullita
Commercially available cordierite and mullite powders were used to obtain cordierite and cordierite-30wt% mullite materials by attrition milling, uniaxial pressing and sintering. Cordierite powders were the coarse (D50 = 1.82 mum), medium (D50 = 0.9 mum) and fine (D50 = 0.45 mum) single granulometric fractions and binary mixtures of them. Mullite powder empl
Materials Research. Publicado em: 2000-10