Copper Of Electrode
Mostrando 1-12 de 81 artigos, teses e dissertações.
-
1. Synthesis of Triazoles by Electro-Assisted Click Reaction Using a Copper Foil Electrode
This paper presents an innovative pathway for the synthesis of triazoles using the well-known “click chemistry” assisted by the electrochemical oxidation of metallic Cu0. The click reaction is used to couple a wide range of biological interest compounds. In this case, faster and less polluting methods for a biological environment was achived by in situ C
J. Braz. Chem. Soc.. Publicado em: 2021-07
-
2. Synergistic Supramolecular Effect on the Electro-Oxidation of Biological Relevant Molecules: A Novel Sensor for Simultaneous Determination of Epinephrine and Uric Acid in Human Urine Using MWCNT and a Copper(II) Complex
In this paper a novel supramolecular strategy to improve the efficiency of a voltammetric sensor to determine two biologically relevant molecules (epinephrine (EP) and uric acid (UA)) is presented. The strategy is based on the use of a glassy carbon electrode modified with a copper(II) complex ([Cu(H2dimpy)Cl]PF6) adsorbed on multi-walled carbon nanotubes (M
J. Braz. Chem. Soc.. Publicado em: 2020-11
-
3. Tópicos Emergentes em Insuficiência Cardíaca: Terapias Intervencionistas na Insuficiência Cardíaca
In this paper a novel supramolecular strategy to improve the efficiency of a voltammetric sensor to determine two biologically relevant molecules (epinephrine (EP) and uric acid (UA)) is presented. The strategy is based on the use of a glassy carbon electrode modified with a copper(II) complex ([Cu(H2dimpy)Cl]PF6) adsorbed on multi-walled carbon nanotubes (M
Arq. Bras. Cardiol.. Publicado em: 2020-11
-
4. Drawing Electrochemical Sensors Using a 3D Printing Pen
This communication demonstrates that a 3D printing pen, commercially-available as a toy for kids, can be used to draw thermoplastic electrochemical sensors using conductive filaments over any desirable format and substrate. A polylactic acid filament containing graphene or carbon black was passed through the 3D pen that works as a handheld 3D printer (fused
J. Braz. Chem. Soc.. Publicado em: 2020-09
-
5. Evaluation of a Graphite-Polyurethane Composite Electrode Modified with Copper Nanoparticles as an Amperometric Flow Detector in a Wall-Jet System for the Determination of Cysteine
A graphite-polyurethane composite electrode (GPUE) was modified by electrodeposition of copper nanoparticles (CuNP) followed by electrochemical treatment in NaOH (GPUE-CuNP), in order to prepare an amperometric sensor for the determination of cysteine (Cys). Cyclic votammograms of Cys solutions at GPUE-CuNP allowed the description of a sequence of electroche
J. Braz. Chem. Soc.. Publicado em: 2020-02
-
6. Performance and Surface Integrity of Wire Electrical Discharge Machining of Thin Ti6al4v Plate Using Coated and Uncoated Wires
Wire Electrical Discharge Machining (WEDM) is one of the most important production technologies to manufacture very accurate small components and tools on any electrical conductive material. Titanium and its alloys have been widely used in automobile and aerospace industry as well as in medical engineering field. Small components and tools with complex geome
Mat. Res.. Publicado em: 03/06/2019
-
7. EFFECT OF THE NATURE OF THE ELECTROLYTE AND THE NATURE OF THE INTERFACE ON THE HYDROGEN EVOLUTION POTENTIAL: EXPERIMENTS FOR CHEMISTRY STUDENTS
This work presents an experiment done for chemistry students about the effect of the nature of the electrolyte and the nature of the interface on the hydrogen evolution reaction by electrolysis. Two techniques are suggested: method A - two identical copper electrodes in a direct current circuit and method B - three different electrodes in a dc potentiostatic
Quím. Nova. Publicado em: 27/05/2019
-
8. Electrode Material Containing Graphite Incorporated to an Amino-Functionalized Polydimethylsiloxane Network for the Detection of Copper
Graphite was incorporated to a polydimethylsiloxane (PDMS) polymer network functionalized with amino groups to obtain an electrode material and used to detect copper ions in aqueous solutions and sugarcane spirit. The polymer network was prepared with PDMS, 3-aminopropyl-trimethoxysilane (APTMS), tetraethyl orthosilicate (TEOS) with addition of graphite to o
J. Braz. Chem. Soc.. Publicado em: 2018-08
-
9. Análisis de la corrosión de uniones por soldadura fuerte de compósitos matriz cobre
ABSTRACT This work presents an electrochemical corrosion study in synthetic seawater of the dissimilar joint of TiC/Cu composite by brazing technique. Composites were machined by liquid infiltration without external pressure. This composite were joined with copper using a filler material constituted by an alloy of silver - copper and titanium powder. The com
Matéria (Rio J.). Publicado em: 19/07/2018
-
10. Development of a Novel and Simple Electroanalytical Procedure for the Determination of Copper in Biofuel Employing a Sensor Based on Vulcan Functionalized with Carbazone
A novel and simple electroanalytical method for the determination of Cu2+ in biodiesel samples by stripping voltammetric analysis was developed. The method employs a carbon paste electrode (CPE) modified with Vulcan carbon, previouly functionalized with carbazone (CBZ). The CPE/Vulcan-CBZ sensor promoted a significant increase in the analytical signal obtain
J. Braz. Chem. Soc.. Publicado em: 2018-04
-
11. Electrocatalytic Oxidation Removal of Phenol from Aqueous Solution with Metal Oxides Doped Carbon Aerogel
Metal oxides (manganese oxide, MnO, manganese dioxide, MnO2, copper oxide, CuO, zinc oxide, ZnO and nickel oxide, NiO) doped carbon aerogel (CA) were prepared and used as catalysts in heterogeneous oxidation of phenol from aqueous solution in a three-dimensional (3D) electrode reactor. Textural characterization of metal oxides doped CA showed that the metal
J. Braz. Chem. Soc.. Publicado em: 2018-04
-
12. Nickel-Copper Alloys Modified Electrodes: an Electrochemical Study on their Interfacial and Supercapacitive Properties
In this manuscript, we report the electrodeposition of nickel-copper alloys in a two steps methodology. Firstly, the copper electrode is oxidized to generate Cu2+ ions followed by the reduction of both Ni2+ and Cu2+. The electrodes were further cycled in KOH to convert the metallic alloy into the respective electroactive hydroxide. This methodology created a
J. Braz. Chem. Soc.. Publicado em: 2017-09