Continuous Cooling Transformation Cct
Mostrando 1-8 de 8 artigos, teses e dissertações.
-
1. Numerical Predictions for the Thermal History, Microstructure and Hardness Distributions at the HAZ during Welding of Low Alloy Steels
A phenomenological model to predict the multiphase diffusional decomposition of the austenite in low-alloy hypoeutectoid steels was adapted for welding conditions. The kinetics of phase transformations coupled with the heat transfer phenomena was numerically implemented using the Finite Volume Method (FVM) in a computational code. The model was applied to si
Mat. Res.. Publicado em: 05/04/2016
-
2. Corrosion and microstructural characterization of martensitic stainless steels submitted to industrial thermal processes for use in surgical tools
INTRODUCTION: The mechanical properties and corrosion resistance of a material are dependent on its microstructure and can be modified by phase transformation. When a phase transformation occurs in a material it usually forms at least one new phase, with physical-chemical characteristics that differ from the original phase. Moreover, most phase transformatio
Rev. Bras. Eng. Bioméd.. Publicado em: 2014-09
-
3. Microstructural characterization of a plate of microalloyed pipeline steel that conforms to API 5L X65 in different regions of the plate as rolled and after austenitization and continous cooling under different cooling rates. / Caracterização microestrutural do aço para tubo API 5L-X65 em diferentes regiões da chapa como laminada e após austenitização e resfriamento sob diversas taxas de resfriamento.
This work aims to characterize and compare the microstructures of different regions of a plate of microalloyed pipeline steel that conforms to API 5L X65, employed in the transportation of natural gas and oil, as received and after being subjected to heat treatments of austenitization and continuous cooling under different cooling rates. The steel under stud
Publicado em: 2009
-
4. Estudo da transformação durante o resfriamento continuo e da microestrutura do aço microligado X80 utilizado na construção de tubos para transporte de gás natural e petróleo. / Study of the transformation during the continuous cooling and the microstructure of microalloyed steel X80 used in the building of pipelines for gas and oil transport.
The continuous increase of energy generated from petroleum and natural gas created the need to improve the mechanical properties of microalloyed steels used in gas and oil pipelines, in order to increase their flow with smaller costs and higher reliability. The control of the different phases, morphology of microconstituents like ferrite plus carbide aggrega
Publicado em: 2008
-
5. Metodologia para uso de simulação física no estudo da ZAC e na obtenção de diagramas CCT para soldagem / The Use of Physical Simulation on HAZ Study and CCT Diagram Attainment Dedicated to Welding
The joining of metals is often associated to metallurgical problems. Specifically, metallurgical transformations in the HAZ (Heat Affected Zone) can occur, what lead to undesirable microestructural changes. The HAZ is a difficult region for studying due to its small dimensions and high thermal gradientes. Thus, in order to overcome this limitation of the HAZ
Publicado em: 2008
-
6. Estudo das transformações de fase de aços TRIP ao Si-Mn microligados com Nb. / Phase transformations study on Nb microalloyed Mn - Si TRIP steels.
The phase transformation kinetics of five Nb microalloyed Si-Mn TRIP steels was studied under continuous cooling and isothermal treatments, using dilatometric techniques, morphologic characterization, Thermocalc computational thermodynamics and Dictra numerical simulation. WDS and EDS X-ray microanalysis and Dictra numerical modeling of C, Mn and Si distribu
Publicado em: 2003
-
7. Plastic behavior of medium carbon vanadium microalloyed steel at temperatures near gamma <-> alpha transformation
Dilatometric techniques were used to build the continuous cooling transformation (CCT) diagram for a medium carbon microalloyed steel; the microstructure and hardness were determined at different cooling rates. The mechanical behavior of the steel in the austenite field and at temperatures approaching austenite to ferrite transformation was measured by means
Materials Research. Publicado em: 2001-07
-
8. Caracterização da temperabilidade de um aço C-Mn microligado ao boro, através de dilatometria e curvas de transformações de fases por resfriamento contínuo. / C-Mn boron microalloyed steel hardenability characterization throught dilatometry and continuous cooling transformations curves.
No presente trabalho, foi realizado um estudo sobre a influência da adição do boro em um aço C-Mn, nas transformações de fases por resfriamento contínuo, através da técnica dilatométrica. Para este estudo, utilizou-se dois aços de composição química semelhante: o aço 10B22 com 30 ppm de boro e o aço sem boro é o E1522, equivalente. Foram tra
Publicado em: 1996