Contact Elements
Mostrando 1-12 de 313 artigos, teses e dissertações.
-
1. Unplanned dilution back analysis in an underground mine using numerical models
Abstract In underground mines, stability problems can cause unplanned dilution, increasing the costs of mining operations, such as loading, transport, crushing and grinding. This is usually dealt with by simply increasing investments with support. However, the design geometry of stopes and drifts also has a great effect on a stope’s stability. The use of e
REM - International Engineering Journal. Publicado em: 2022
-
2. Numerical formulation for nonlinear analysis of concrete and steel shells with deformable connections
Abstract A two-dimensional interface finite element capable of associating flat shell elements positioned one above the other was developed. The implemented interface element can physically simulate the contact between the flat shell elements and connect the reference planes of the shell elements above and below it. The formulation presented allows considera
REM, Int. Eng. J.. Publicado em: 2021-09
-
3. DEVELOPMENT OF A PNEUMATIC OLIVE HARVESTER
ABSTRACT A pneumatic olive harvester was developed and evaluated in this study. The components of the developed machine were the limb clamp, vibrating unit, control elements, main tube, air-pressured hoses, control valve, and power source. The measurements that related to the development of the harvester were fruit and limb damage, and some physical and mech
Eng. Agríc.. Publicado em: 2021-05
-
4. Hardening and Dynamic Recovery During Hot Compression Test of Copper Simulated as Viscoplastic Material
The Norton-Bailey equation was used to simulate by finite elements the hardening and dynamic recovery of copper during the hot compression tests. The constants of Norton-Bailey equation were determined from the Voce-Kocks model. The simulation assumes a Mortar Contact with Coulomb friction and axial symmetry. Numerical results were compared with experiments.
Mat. Res.. Publicado em: 05/12/2019
-
5. Surface morphology and repellency mechanism investigation of Salvinia molesta plant
ABSTRACT Bionics is a versatile tool with a technological potential, which designers use to search for signs and clues about functional elements and mechanisms in nature that allow for the development of products. The purpose of this study was to analyze the morphology of the aquatic plant Salvinia molesta, aiming to determine the water repellency of its lea
Matéria (Rio J.). Publicado em: 25/11/2019
-
6. Nonlinear numerical analysis of composite slabs with steel decking
Resumo O comportamento das lajes mistas é governado pelo cisalhamento longitudinal na interface entre o aço e o concreto, que é desenvolvido em lajes sob flexão simples. O método m-k e o método da interação parcial, utilizados no cálculo da resistência ao cisalhamento na interface aço-concreto de lajes mistas, são baseados em ensaios experimentai
Rev. IBRACON Estrut. Mater.. Publicado em: 11/11/2019
-
7. Gut: Key Element on Immune System Regulation
Abstract The gut is the main organ that mediates the contact between antigens with our organism, controlling the immune response against environmental factors, such as microbiota and food. Innate lymphoid cells participate in the gut-associated lymphoid tissue (GALT) maturation during the prenatal and early postnatal periods. After birth, breast milk provide
Braz. arch. biol. technol.. Publicado em: 13/06/2019
-
8. Numerical approach of the steel-concrete bond behavior using pull-out models
ABSTRACT This paper deals with the analysis of monotonic loading behavior in pull-out tests. The main objective is to obtain a reliable numerical model to represent the steel-concrete bond behavior using previously obtained experimental results. The tests were performed in RILEM pull-out specimen using 10 mm steel bar and concrete with compressive strength o
Matéria (Rio J.). Publicado em: 10/06/2019
-
9. Educação para o Processo do Morrer e da Morte pelos Estudantes de Medicina e Médicos Residentes
RESUMO Introdução O processo do morrer e da morte é um tema gerador de reações distintas entre estudantes de medicina e médicos residentes, que são influenciados por suas experiências pessoais e profissionais prévias, bem como questões culturais, psicológicas, religiosas e outras. Objetivo Avaliar a educação de estudantes de medicina (EM) do
Rev. bras. educ. med.. Publicado em: 2019-06
-
10. MONITORAMENTO DA COMPOSIÇÃO EM ÉSTERES DO BIODIESEL DO ÓLEO DE AMÊNDOA DA MACAÚBA (Acrocomia aculeata (Jacq.) Lodd. ex Mart.) EM CONTATO DIRETO COM O AÇO CARBONO E O AÇO CARBONO GALVANIZADO
The oil from the macaúba (Acrocomia aculeata) fruit, a native palm in Brazil, has a real potential for the industrial production of biodiesel. This report describes an experimental work devoted to monitor the chemical behavior of the fatty acid methyl esters from oil of the macaúba fruit kernel and the leaching of metal elements into the biodiesel put in c
Quím. Nova. Publicado em: 27/05/2019
-
11. Contact phenomena modeling in biological structures on the example of the implant-bone
Abstract The work presents modeling of interface phenomena in biological structures. Selected ways of numerical modeling of phenomena at the boundary of two materials by means of FEM methods are discussed. The work focuses on phenomena related to biological structures and their mutual interactions. Using an example of an implant-bone system, various techniqu
Lat. Am. j. solids struct.. Publicado em: 14/03/2019
-
12. Sensitivity analysis of 3D frictional contact with BEM using complex-step differentiation
Abstract This paper presents a study of the complex step differentiation method applied to a parameter sensitivity analysis for 3D elastic contact problem. The analysis is performed with the Boundary Element Method (BEM) using discontinuous elements and the Generalized Newton Method with line search (GNMls). A standard BEM implementation is used and the cont
Lat. Am. j. solids struct.. Publicado em: 22/10/2018