Construction Materials And Components
Mostrando 1-12 de 31 artigos, teses e dissertações.
-
1. Fatigue failure analysis of HSLA steel sheets holed by conventional and flow drilling processes
RESUMO O processo de furação por escoamento produz buchas para uniões removíveis que podem ser roscadas pelo processo de rosqueamento por conformação, reduzindo etapas da produção de componentes da indústria automobilística e em galpões da construção civil. Aços de alta resistência e baixa liga (ARBL) são empregados em variadas aplicações n
Matéria (Rio J.). Publicado em: 16/09/2019
-
2. Diretrizes para o planejamento de uma demolição seletiva em edifícios
Resumo: O objetivo do presente artigo é desenvolver um conjunto de diretrizes que permitam aprimorar o planejamento das atividades de demolição e promover práticas mais sustentáveis no canteiro de obras de demolição. A pesquisa empírica foi realizada através de três estudos de caso, desenvolvendo um diagnóstico do funcionamento das atividades das
Interações (Campo Grande). Publicado em: 08/08/2019
-
3. Fatigue failure analysis of HSLA steel sheets holed by conventional and flow drilling processes
ABSTRACT Flow drilling process produces bushes for removable joints that can be threaded by forming tapping process, reducing stages in production of components of automobile industry and in construction sheds. High strength and low alloy steels (HSLA) are employed on several applications in the processing industry. Benefits provided by these materials make
Matéria (Rio J.). Publicado em: 10/06/2019
-
4. Production of components with plaster residue and sodium citrate: physical, mechanical, rheological analysis
Resumo A indústria da construção civil, grande influenciadora no desenvolvimento econômico e social do país, é responsável por um grande consumo de matéria prima e produção de resíduos. O gesso, em especial, apresenta crescimento expressivo, sobretudo na região Nordeste, devido ao Pólo Gesseiro do Araripe. Considerando os graves problemas de seu
Ambient. constr.. Publicado em: 2019-04
-
5. Effects of pre-treatment of Curauá fibers on compatibility with portland cements
ABSTRACT There has been ever growing interest in the construction industry in using lighter, eco-friendly and sustainable materials, while maintainingthe desirable mechanical properties. The objective of the present work was to evaluate the effects of pre-treatments on chemical compatibility between Curauá fiber (Ananas erectifolius) and Portland cement. In
Matéria (Rio J.). Publicado em: 18/10/2018
-
6. Impact of an Alkaline Solution on the Chemistry, Mineralogy, and Sorption Properties of a Typic Rhodudult Soil
Abstract The preferred option for disposal of short-lived low and intermediate level radioactive wastes is a near surface disposal facility in which soil is one of the barriers that avoid radionuclide migration outside the controlled area. For construction of that kind of facility, concrete is widely used, and its interaction with water induces its degradati
Rev. Bras. Ciênc. Solo. Publicado em: 09/11/2017
-
7. Evaluation of a Thermochromic Liquid Crystal for Use as a Temperature Sensor for Components of Electrical Systems
Connectors used in electrical power distribution systems should allow the passage of electricity continuously and without interruption. However, this does not always occur due to failure caused by improper assembly and/or corrosion of the materials employed, which reflects the quality of service. Notable among the new detection technologies that have been st
Mat. Res.. Publicado em: 22/05/2017
-
8. An inexpensive yet realistic model for teaching vasectomy
Purpose Teaching the no-scalpel vasectomy is important, since vasectomy is a safe, simple, and cost-effective method of contraception. This minimally invasive vasectomy technique involves delivering the vas through the skin with specialized tools. This technique is associated with fewer complications than the traditional incisional vasectomy (1). One of the
Int. braz j urol.. Publicado em: 2015-04
-
9. Crescimento de trincas em fadiga torsional / Fatigue crack growth in torsional fatigue
With increasing competition and reliability in modern equipment, is of vital importance to studies on the structural fatigue life in the time domain and frequency domain, the advance speed and cost reduction in computing greatly simplifies the prediction fatigue life. But it is also necessary to know the modes of fatigue crack growth, and its mechanisms. Aft
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 19/07/2011
-
10. Fracture mechanics of polymer mortar made with recycled raw materials
The aim of this work is to show that industrial residues could be used in construction applications so that production costs as well as environmental protection can be improved. The fracture properties of polymer mortar manufactured with recycled materials are investigated to evaluate the materials behaviour to crack propagation. The residues used in this wo
Materials Research. Publicado em: 2010-12
-
11. Environmentally responsive polymeric "intelligent" materials: the ideal components of non-mechanical valves that control flow in microfluidic systems
Miniaturization and commercialization of integrated microfluidic systems has had great success with the development of a wide variety of techniques in microfabrication, since they allowed their construction at a low cost and by following simple step-series procedures. However, one of the major challenges in the design of microfluidic systems is to achieve co
Brazilian Journal of Chemical Engineering. Publicado em: 2010-03
-
12. Análise da especificação de materiais e componentes construtivos no processo de projeto de construções metálicas
The current scenario of high competitiveness in civil construction, coupled with increasing client demands, has lead to a constant tightening of deadlines, improvement of efficiency, an increase in productivity and better quality of projects. The adoption of new technologies and the implementation of constructive rationalization through the use of steel cons
Publicado em: 2010