Conductive Polymers
Mostrando 1-12 de 26 artigos, teses e dissertações.
-
1. Chemometric Evaluation of Poly(3-hexylthiophene) Electrochemical Aging Path as a Function of Electrochemical Synthesis Variables
Conductive polymers are versatile materials that can be applied in many different technology fields, especially green energy. They have several advantages, such as easy synthesis, low density, and cost. However, its electric conduction property is also related to material aging with great loss of their characteristics, limiting their applicability. The in-de
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
2. Structural and Morphological Characteristics of Polyaniline Synthesized in Pilot Scale
ABSTRACT: Polyanilines have many applications in Aerospace, especially in their doped form. Studies on their synthesis in a pilot scale can contribute to obtain products with desirable characteristics for such applications. The present study reports the chemical oxidative synthesis of polyaniline in pilot scale and different reaction times in order to determ
J. Aerosp. Technol. Manag.. Publicado em: 2017-03
-
3. Effect of oxidants and anionic surfactants on the morphology and permittivity of polypyrrole and its blends with epoxy resin
Abstract In this work, conductive polymers were prepared based on polypyrrole (PPy) and its blends with epoxy resin. The chemical syntheses of PPy used two oxidants (Fe2(SO4)3 and FeCl3.6H2O) and two surfactants (DBSNa and DBSA). PPy samples and their blends were characterized by scanning electron microscopy, electrical conductivity by four points, and measu
Polímeros. Publicado em: 18/08/2016
-
4. Castor oil and commercial thermoplastic polyurethane membranes modified with polyaniline: a comparative study
The study of conducting polymeric membranes is decisive in some areas, as in fuel cells and electrodialysis. This work aims the study of membranes using conventional and conductive polymers blends. Two types of polyurethane were used as conventional polymers, commercial thermoplastic polyurethane and polyurethane synthesized from castor oil and 4-4-dicyclohe
Mat. Res.. Publicado em: 10/05/2013
-
5. Desenvolvimento de membranas mistas a base de poli(indeno) sulfonado e PVA reticulado com objetivo de aplicação em célula a combustível tipo PEM
The study on alternative membranes for use in fuel cells PEM (Proton Exchange Membrane) has been conducted by different research groups worldwide. As the commercial membranes still have high cost and performance limitations in certain operating conditions of fuel cells powered by hydrogen and alcohol. This study aimed to evaluate non-fluorinated membranes pr
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2011
-
6. Síntese e aplicação de polímeros condutores em sensores olfativos / Synthesis and application of conductive polymers in olfactory sensors
Os objetivos do trabalho consistem em síntese e caracterização de três polímeros: poli(2,1,3-benzotiadiazol-4,7-ilenovinileno) (PBTDV), poli(2,1,3-benzotiadiazol-4,7-ilenovinileno-co-2-bromo-5-hexilóxi-p-fenilenovinileno (PBTDV-co-BHPPV) e poli(2-bromo-5-hexilóxi-p-fenilenovinileno) (BHPPV), sendo os dois primeiros inéditos; aplicação de polímeros
Publicado em: 2010
-
7. Implantação iônica de baixa energia em polímero para desenvolvimento de camadas compósitas nanoestruturadas condutoras litografáveis. / Low energy ion implantation into polymers to develop conductive composite layers for lithography.
Electronics using polymers instead of silicon is a recent research area with promising economic perspectives. Polymer with metallic particles composites presents interesting electrical, magnetic and optical properties and they have been produced by a broad variety of techniques. Metal ion implantation using plasma is one of the used methods to obtain conduct
Publicado em: 2010
-
8. Análise fotocondutiva de estruturas fotovoltaicas baseadas em TiO2 e poli(3-hexiltiofeno) / Photoconductivity analysis of photovoltaic structures based on TiO2 and poly(3-hexylthiophene)
In this work we investigated electronic transport phenomena in an ITO/TiO2/RRP3HT/Al structure using photoconductivity spectral response when devices were illuminated either by the ITO electrode or by the aluminum. RRP3HT is the regioregular poly(3-hexylthiophene), a polymer that exhibits a relatively strong photovoltaic activity. RRP3HT were dissolved in a
Publicado em: 2009
-
9. Preparation and characterization of ammonia sensor based on polyaniline and polyaniline-phthalocyanines thin films. / Preparação e caracterização de sensores de amônia baseados em filmes ultrafinos de polianilina e polianilina-ftalocianinas.
O presente trabalho tem como objetivo o estudo e o desenvolvimento de dispositivos eletrônicos, para o monitoramento de gás de amônia, confeccionados com filmes ultrafinos de polianilina e ftalocianinas metálicas. Foram fabricados três diferentes tipos de sistemas: polianilina/PVS, polianilina/ftalocianina de níquel e polianilina/ftalocianina de cobre,
Publicado em: 2007
-
10. Study of charge transport layers in polymer light emitting diodes. / Estudo de camadas transportadoras de cargas em diodos emissores de luz poliméricos.
In the present work, the study of the optical and electrical properties of polymeric electroluminescent devices known as Polymer Light-Emitting Diodes (PLEDs) and the development of Hole Transport Layers (HTLs) to promote an increase of the electrical efficiency of the devices was performed. PLEDs were constructed with structures like Anode/HTL/Electrolumine
Publicado em: 2007
-
11. Redes neurais artificiais aplicadas à otimização de processos de deposição de filmes finos poliméricos. / Artificial neural networks applied to the optimization of polymeric thin-films deposition processes.
Nesse trabalho é apresentado o estudo de redes neurais artificiais (RNAs) como sistemas de aprendizado, simulação e otimização de processos de deposição de filmes finos poliméricos. Duas técnicas de deposição comumente utilizadas para a fabricação de dispositivos eletrônicos e sensores poliméricos foram escolhidas: i) spin coating ou centrifug
Publicado em: 2006
-
12. Desenvolvimento de um sistema automatizado para a fabricação de filmes automontados
In this technical note, we describe the construction of a low-cost computer controlled device for layer-by-layer film fabrication. The software allows to control multiple material deposition, washing and drying steps and the time for each operation. To test the device, we produced and characterized self-assembled films of conductive polymers by alternating p
Química Nova. Publicado em: 2004-08