Computational Simulation
Mostrando 25-36 de 609 artigos, teses e dissertações.
-
25. Life Cycle Assessment (LCA) and Wind Power Generation: Application of the Methodology and the Generator to Power System
ABSTRACT Sustainability and economics are current issues in the generation of electricity. The energy matrix is diversified and some forms have stood out, such as wind. Some tools have been developed to improve project efficiency, one of which is Life Cycle Assessment (LCA). This presents solidity when assisting projects financially and environmentally, eval
Braz. arch. biol. technol.. Publicado em: 29/10/2018
-
26. The Formation and Dynamic Evolution of Antiphase Domain Boundary in FeAl Alloy: Computational Simulation in Atomic Scale
The main objective of the present work is to build a model and analyze the dynamic evolution process of antiphase domain boundary (APDB) in FeAl alloy. The formation, evolution of APDB, long range order (LRO), the crystal structure transition, impact of temperature on LRO, are investigated. Comparisons with experiments proves that the model is competent for
Mat. Res.. Publicado em: 02/08/2018
-
27. Characterization of Phase Transformations and Microstructural Changes in an API 5CT L80 Steel Grade During Ni Alloy Laser Cladding
The superficial coatings in micro-alloyed steel pipes has been a pointed way to decrease the corrosion problems in oil and gas industry. However, little emphasis has been given to the substrate. The effects of the deposition method on the steel microstructure and properties are still not well described. In this context, this work studied the effect of Ni sup
Mat. Res.. Publicado em: 26/07/2018
-
28. Direct Numerical Simulation of a Compressible Flow and Matrix-Free Analysis of its Instabilities over an Open Cavity
ABSTRACT: This study takes a Jacobian-free approach based on the Arnoldi iteration to present a method to perform hydrodynamic instability analysis based on Direct Numerical Simulations. The method employs high order spatial and temporal discretizations for the flow simulation and has very low requirements of computational time and memory, compared to conven
J. Aerosp. Technol. Manag.. Publicado em: 19/07/2018
-
29. Diseño, simulación y análisis del proceso de extrusión de un perfil termoplástico en PVC rígido para optimizar el diseño de la matriz y los parámetros
ABSTRACT The objective of the present work was to verify and optimize the die design to manufacture a thermoplastic profile in rigid PVC using the simulation of the flow in the mentioned matrix through the use of Computational Fluid Dynamics (CFD) and through tests in extrusion, using an experimental calibrator, the required geometry and dimensions were obta
Matéria (Rio J.). Publicado em: 19/07/2018
-
30. Design of the austempering heat treatment of a ductile iron differential case aided by computer simulation
Abstract Austempered ductile iron is frequently employed in the fabrication of automobile parts due to its good mechanical properties, and its simplicity and low cost of the manufacturing process. The heat treatment design is an important stage, in which parameters such as temperatures and durations are chosen according to the required microstructure, part
Lat. Am. j. solids struct.. Publicado em: 02/07/2018
-
31. Computational Investigation on the Effects of Two-Way Wing Morphing Strategy in the Critical Mach Number
ABSTRACT: The elasto-flexible wing morphing is an advanced methodology to achieve higher lift-to-drag (L/D) ratio for the subsonic wing configurations at the given flow conditions. The present article describes mechanisms of continuous morphing of a swept back wing for achieving effective delay in the critical Mach number (Mcr) distribution over the wing sur
J. Aerosp. Technol. Manag.. Publicado em: 08/03/2018
-
32. EMPREGO DE QUÍMICA COMPUTACIONAL NA VERIFICAÇÃO E VALIDAÇÃO DA PRESSÃO DE DETONAÇÃO DE EXPLOSIVO PLÁSTICO-PBX
Prediction of chemical explosions parameters is an important step for blast tests for civil and military applications. Applying computational chemistry and experimental results, this paper presents the decay rate of pressure in air from the epicenter of 2.70 kg of PBX-Plastic bonded explosive detonation to the distance of 2.0 meters. Pressure in the epicente
Quím. Nova. Publicado em: 2018-03
-
33. An integrated optimization and simulation model for refinery planning including external loads and product evaluation
Abstract Because of its potential benefits, petroleum refineries are increasingly concerned about their planning operations. Although some refinery models for production planning were proposed, they are quite limited in their usefulness. This study describes an integrated approach involving nonlinear optimization and simulation of refinery units in order to
Braz. J. Chem. Eng.. Publicado em: 2018-01
-
34. A TVD scheme for 3d unstructured grids applied to compositional reservoir simulation
Abstract In reducing the grid orientation effect for the numerical solution of partial differential equations, interpolation functions play an important role when the advective transport of the governing equations is considered. This is due to the fact that, in general, the unknowns are evaluated in the vertices of the elements and such properties must be ex
Braz. J. Chem. Eng.. Publicado em: 2017-10
-
35. Cowper-Symonds parameters estimation for ABS material using design of experiments with finite element simulation
Abstract Polymers exhibit significant strain rate dependence in their mechanical strength. The impact simulations accuracy is associated with the use of mechanical properties obtained at high strain rates. These properties are often not available to engineers introducing a risk on the product development step. This paper presents a method for adjusting the p
Polímeros. Publicado em: 21/09/2017
-
36. Determination of the Mechanical Properties of Epoxy Silica Nanocomposites through FEA-Supported Evaluation of Ball Indentation Test Results
In the present paper a continuous Finite Element Analysis (FEA) simulation method of the ball indentation hardness test is introduced in order to describe the deformation behavior of nanosilica composites and with this to extract precisely the material's stress-strain behavior. The developed procedure demonstrate in particular the adequacy of this method to
Mat. Res.. Publicado em: 31/08/2017