Computational Simulation
Mostrando 1-12 de 609 artigos, teses e dissertações.
-
1. Semi-analytical Equations for Designing Terahertz Graphene Dipole Antennas on Glass Substrate
Abstract Semi-analytical equations are developed for aiding the process of designing terahertz graphene-based rectangular dipole antennas lying on glass substrates. It directly provides the dipole length required for obtaining resonance at a desired frequency since antenna width and graphene chemical potential are known. By using the finite-difference time-d
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
2. Efficient Low-Complexity Optimized Channel Estimating Methods for OFDM-Based Low-Voltage Broadband Power Line Communication Systems
Abstract Broadband Power Line Communication (BB-PLC) technology enables data transmission for smart grid applications. Nevertheless, channel equalizers are required in the receiver to estimate and compensate for the nonlinear time-variant impulse response and noise interference effects introduced by the BB-PLC channel. In this paper, we append the Particle S
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
3. Damped Jacobi Methods Based on Two Different Matrices for Signal Detection in Massive MIMO Uplink
Abstract For massive multiple-input multiple-output (m-MIMO) uplink, the performances of the linear minimum mean-square error (MMSE) detector are considered near optimal, and they occupy benchmark place for most linear iterative detectors. However, the MMSE algorithm is known by its load computational complexity due to the implication of large-scale matrix i
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2021-03
-
4. Grating Lobes Suppression in Frequency Selective Surfaces Using Electromagnetic Band Gap with Square Holes
Abstract In this paper, the authors present a proposal for an application of electromagnetic bandgap (EBG), for suppression of grating lobes, in frequency selective surfaces (FSS), not yet studied in the literature. An alternative type of EBG with square holes was proposed to reduce the computational effort in simulations. The study consists of an applicatio
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2020-12
-
5. DINÂMICA MOLECULAR REATIVA DA ABERTURA DO ANEL EPÓXI EM REAÇÕES COM POLIAMINA Ellen
The molecular dynamics simulations were used to study the epoxy ring-opening in the determination of kinetic parameters, with a temperature range from 1500 to 2500 K in a 20 x 20 x 20 Å unit cell containing 15 molecules of C2H4O (ethylene oxide) and 35 molecules of CH6N2 (methanediamine). The activation energy values for epoxy and diamine was 66 and 92 kJ m
Quím. Nova. Publicado em: 2020-05
-
6. APLICAÇÃO DA FLUIDODINÂMICA COMPUTACIONAL (CFD) E ANÁLISE DE ACELERANTES NA INVESTIGAÇÃO DE INCÊNDIO
Fire investigation is a complex activity that involves skill, technology, knowledge and science and aims to elucidate fire-related events such as cause, origin, propagation, phenomena, etc. Chemical analysis to verify the presence of foreign substances in that location, as well as the use of fire simulation software are efficient and economical ways to study
Quím. Nova. Publicado em: 2020-05
-
7. PREPARATION AND SIMULATION OF THE ON-LINE SiO2/S COATING FOR COKING INHIBITION IN THE INDUSTRIAL CRACKING FURNACE
Abstract Coke formation inside radiant coils is one of the main problems during thermal cracking of hydrocarbons. The on-line preparation of the coating for coking inhibition is a promising technology because it provides more flexibility to the operators on site. The SiO2/S coating was prepared on the inner surface of coils in an 8-year-served GK-VI industri
Braz. J. Chem. Eng.. Publicado em: 13/01/2020
-
8. Computational Verification of the NBR 15.220-3 Recommendations for Thermal Comfort in the City of Curitiba
Abstract The Brazilian Standard for Thermal Performance and Bioclimatic Zoning (NBR 15.220-3) establishes twelve strategies to achieve thermal comfort inside buildings considering the dry bulb temperature and the predominant humidity in each climate. These strategies are visualized in the Bioclimatic Charts of Brazil main cities. This study seeks, through c
Braz. arch. biol. technol.. Publicado em: 25/11/2019
-
9. Influences of the mesh in the CAE simulation for plastic injection molding
Abstract Although computer-aided engineering (CAE) software has been used for many years in the plastic industry, identifying the most appropriate mesh geometry and density remains a challenge. It can affect the accuracy of the simulation, the time and the costs. The evaluation of the most suitable mesh is not easy because the difficulties to obtain the real
Polímeros. Publicado em: 04/11/2019
-
10. Numerical study of upstream disturbances on the performance of electromagnetic and ultrasonic flowmeters
ABSTRACT Electromagnetic and ultrasonic flowmeters are high precision devices that can measure the water flow in pressurized irrigation networks. In these networks, the inadequate installation distance of flow control valves generates upstream disturbances which will increase measurement errors and reduce the accuracy of the equipment. Therefore, estimating
Sci. agric. (Piracicaba, Braz.). Publicado em: 04/11/2019
-
11. ROBUST METHODOLOGY FOR DETECTION OF SPIKES IN MULTIBEAM ECHO SOUNDER DATA
Abstract Currently, during the operation in shallow waters, scanning systems, such as multibeam systems, are capable of collecting thousands of points in a short time, promoting a greater coverage of the submerged bottom, with consequent increase in the detection capacity of objects. Although there has been an improvement in the accuracy of the depths collec
Bol. Ciênc. Geod.. Publicado em: 14/10/2019
-
12. Numerical Simulation of Atom-Transfer Radical Polymerization of tert-butyl Methacrylate
Block copolymers based on tert-butyl methacrylate (tBMA) have many uses, such as thermo‐responsive polymers, amphiphilic copolymers, and many applications in the medical field. Atom-transfer radical polymerization (ATRP) is the main technique to produce these controlled macromolecular architectures. This paper provides a simplified kinetic modeling and com
Mat. Res.. Publicado em: 02/09/2019