Computational Method
Mostrando 1-12 de 967 artigos, teses e dissertações.
-
1. Phase Adjustment of S-Parameters from Coupled Resonator Filters
Abstract This paper presents a method to cancel the constant phase loading and transmission line that are added to the S-parameters of coupled resonant networks. Thus, the phase-corrected S-parameters may be used to obtain a rational model together with its representative coupling matrix. This method is applicable to lossy and lossless coupled resonator netw
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
2. Semi-analytical Equations for Designing Terahertz Graphene Dipole Antennas on Glass Substrate
Abstract Semi-analytical equations are developed for aiding the process of designing terahertz graphene-based rectangular dipole antennas lying on glass substrates. It directly provides the dipole length required for obtaining resonance at a desired frequency since antenna width and graphene chemical potential are known. By using the finite-difference time-d
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
3. Bandpass Filter Using SIW Technology in Inductive Window Topology with Low-Cost Substrate FR-4
Abstract This paper features a step-by-step procedure for designing, simulate, and manufacture a bandpass filter using an inductive window topology within the substrate integrated waveguide (SIW) technology. We have chosen an operating frequency in the microwave range compatible with IoT circuits, employing a dielectric material, the FR-4, which is low cost
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
4. DESIGN AND EXPERIMENT OF A SAFFLOWER PICKING ROBOT BASED ON A PARALLEL MANIPULATOR
ABSTRACT To mitigate the large demand for safflower picking labour and the low efficiency of manual picking, a safflower picking robot that is based on a parallel manipulator is designed. The whole robot mainly consists of a walking device, parallel manipulator device, vision device, picking device, filament collection device, control system, and motor drive
Engenharia Agrícola. Publicado em: 2022
-
5. A computational modeling method for root canal endoscopy using a specific CBCT filter: A new era in the metaverse of endodontics begins
Resumo Uma revolução tecnológica contemporânea deu início a uma nova era no metaverso da Endodontia, um mundo de possibilidades operacionais virtuais que utilizam uma réplica exata das estruturas naturais do complexo dentomaxilofacial. Este estudo descreve um método de modelagem computacional para a endoscopia do canal radicular, usando um moderno sof
Brazilian Dental Journal. Publicado em: 2022
-
6. Finite strip method computer application for buckling analysis of thin-walled structures with arbitrary cross-sections
Abstract The Direct Strength Method (DSM) is a well-known formulation presented in the Brazilian standard ABNT NBR 14762:2010, that estimates the strength capacity of cold-formed steel (CFS) members. However, this formulation requires the elastic critical buckling loads as point of departure, regarding local (L), distortional (D) and global (G) modes, which
REM, Int. Eng. J.. Publicado em: 2021-09
-
7. ARTIFICIAL NEURAL NETWORK-BASED METHOD TO IDENTIFY FIVE VARIETIES OF EGYPTIAN FABA BEAN ACCORDING TO SEED MORPHOLOGICAL FEATURES
ABSTRACT One of the new crop varieties that have been adopted for high yield is the Egyptian faba bean. However, poor-quality faba bean has reduced economic value. Quality evaluation is thus important and can be performed using computational intelligence. We developed a robust method based on morphological features and artificial neural network for quality g
Eng. Agríc.. Publicado em: 2020-12
-
8. Lowering costs for large-scale screening in psychosis: a systematic review and meta-analysis of performance and value of information for speech-based psychiatric evaluation
Objective: Obstacles for computational tools in psychiatry include gathering robust evidence and keeping implementation costs reasonable. We report a systematic review of automated speech evaluation for the psychosis spectrum and analyze the value of information for a screening program in a healthcare system with a limited number of psychiatrists (Maputo, M
Braz. J. Psychiatry. Publicado em: 2020-12
-
9. Study using a CFD approach of the efficiency of a roof ventilation closure system in a multi-tunnel greenhouse for nighttime microclimate optimization
ABSTRACT The thermal efficiency of naturally ventilated greenhouses is limited due to the permanent exchange of air through the vents, especially during the night hours. The objective of the work consisted in evaluating a system of inflatable air ducts that close the roof vents during the night as a strategy to reduce the energy loss during these hours. For
Rev. Ceres. Publicado em: 2020-10
-
10. Error Analysis of the Numerical Method for Correcting the Propagation of EM waves in the Troposphere
Abstract Electromagnetic (EM) waves do not travel in straight lines in the troposphere due to refraction. This leads to errors in many engineering applications. In order to correct these errors, a numerical solution based on the difference method has been proposed, which can reveal the degree of EM wave bending owing to atmospheric refraction, moreover, it c
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2020-09
-
11. Discrete element modeling of non-spherical particles using a spherical shape
Abstract Real non-spherical particles can be modeled using the Discrete Element Method (DEM) with sphere clusters, superquadrics, or polyhedral particles. However, in applications involving a considerable number of particles, the analysis can become impracticable. The goal of this study is to demonstrate how well spherical particles can reproduce the flow of
REM, Int. Eng. J.. Publicado em: 2020-09
-
12. Optimization of geometrically nonlinear truss structures under dynamic loading
Abstract The goal of this article is to present the formulation of the optimization problem of truss structures with geometric nonlinearity under dynamic loads and provide examples of this problem. The formulated optimization problem aims to determine the cross-sectional area of the bars that minimizes the weight of the structure, imposing constraints on nod
REM, Int. Eng. J.. Publicado em: 2020-09