Compressive Flow
Mostrando 13-24 de 28 artigos, teses e dissertações.
-
13. Dry-grinded ultrafine cements hydration. physicochemical and microstructural characterization
The aim of the present research work was the evaluation of the physicochemical and microstructural properties of two ultrafine cements, produced by dry grinding of a commercial CEM I 42.5N cement. The effect of grinding on particle size distribution was determined by laser scattering analyzer. All cements were tested for initial and final setting times, cons
Mat. Res.. Publicado em: 01/02/2013
-
14. A characterization for the flow behavior of as-extruded 7075 aluminum alloy by the improved Arrhenius model with variable parameters
In order to perform the numerical simulations of forging response and establish the processing parameters for as-extruded 7075 aluminum alloy, the compressive deformation behavior of as-extruded 7075 aluminum alloy were investigated at the temperatures of 573 K, 623 K, 673 K and 723 K and the strain rates of 0.01 s-1, 0.1 s-1, 1 s-1 and 10 s-1 on a Gleeble15
Mat. Res.. Publicado em: 13/11/2012
-
15. Efeito do ângulo da fieira na geometria e propriedades mecânicas de barras trefiladas
In cold drawing of metallic bars most of the plastic flow is caused by compressive forces which arise from the reaction of the metal to the die. Due to the characteristics of the process this flow is not homogeneous along the cross section of the bar and is influenced by the die geometry. This inhomogeneous deformation generates residual stresses in the bars
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 18/03/2011
-
16. Properties of high-workability concrete with recycled concrete aggregate
This study presents the effects of recycled concrete aggregate (RCA) on the key fresh and hardened properties of concrete. RCA was used to produce high-workability concrete substituting 0-100% natural coarse aggregate (NCA) by weight. The slump and slump flow of fresh concretes were determined to ensure high workability. In addition, the compressive, flexura
Materials Research. Publicado em: 03/06/2011
-
17. Riemann Problems for a Symmetrical System of Two Conservation Laws / Problemas de Riemann para um Sistema Simétrico de Duas Leis de Conservação
In this dissertation we describe the solutions to the Riemann problem for a system of two conservation laws written in the normal from according to classification of Schaeffer-Shearer in [9]. Through changes of variables Schaeffer-Shearer determined the normal form for a nonlinear system of two conservation laws with an isolated umbilical point in state spac
Publicado em: 2010
-
18. Unicidade de soluções fracas das equações de Navier-Stokes para fluidos compressiveis / Uniqueness of weak solutions of the Navier-Stokes equations of compressible flow
Este trabalho consiste de uma exposição detalhada do resultado provado no artigo Uniqueness of Weak Solutions of the Navier-Stokes Equations of Multidimensional, Compressible Flow de D. Hoff (SIAM J. Math. Anal - 2006) sobre a unicidade de solução fraca e a dependência contínua da solução fraca nos dados iniciais para as equações de Navier-Stokes p
Publicado em: 2009
-
19. Existencia e unicidade de solução fraca global das equações de Navier-Stokes em uma dimensão para fluidos isentropicos compressiveis com a viscosidade dependente da densidade / On global weak solutions to ID compressible isentropic Navier-Stokes equações with density-dependent viscosity
Este trabalho consiste de uma exposição detalhada do resultado provado no artigo "Global weak solutions to 1D compressible isentropic Navier-Stokes equations with density-dependent viscosity" de S. Jiang, Z. P. Xin e P. Zhang (Methods Appl. Anal. - 2005), sobre a existência e unicidade de solução fraca para o sistema de Navier-Stokes unidimensional de u
Publicado em: 2009
-
20. Estudo de mecanismos de deformação lenta da gipsita bandada da Chapada do Araripe em ensaios de fluência monitorados por emissão acústica / Study of slow deformation mechanisms of the banded gypsum rock of the Chapada do Araripe in creep tests monitored by acoustic emission
Experimental studies by several authors have shown some of the key deformation mechanisms in gypsum, such as plastic flow and pressure dissolution. Even so, there is still sparse knowledge about the mechanical behavior of natural gypsum rocks. Creep mechanisms of the banded gypsum rock of Santana Formation from the Chapada do Araripe (Santana Formation) in c
Publicado em: 2009
-
21. Estudo da influência das adições minerais no comportamento do concreto sob a ação do fogo
The present study assessed the behavior of concrete produced from mineral additions when subjected high temperatures typical occurrence in fire. Representative speciments were shaped using only Portland cement CP V- ARI as binder, and others, with the same amount of binder, but replacement cement by mineral additions like blast furnace slag low reativity, bl
Publicado em: 2008
-
22. AnÃlise de escoamentos compressÃveis nÃo-viscosos em trÃs dimensÃes utilizando o mÃtodo dos elementos finitos por aresta
This work has as its main goal the development of a computational tool for numerical simulation of compressible fluid flow problems for three dimensions, using as starting point the computational tool developed by LYRA (1994) that dealt with fluid flow problems in two dimensional domain. For the development of this tool, a space discretization was adopted us
Publicado em: 2008
-
23. INFLUÊNCIA DE ADIÇÕES MINERAIS POZOLÂNICAS E DE FINOS DE PEDREIRA NAS PROPRIEDADES MECÂNICAS E NA MICROESTRUTURA DO CONCRETO AUTO-ADENSÁVEL / Influence of the mineral additions and the quarry dust in the mechanical properties and the microstructure of the self-compacting concrete
For the benefits of its properties in fresh state, self-compacting concrete (SCC) demands a high powder content in the composition, nearby 450kg/m. The quarry dust, resultant material of the coarse aggregate production, can b considered as an economic and sustainable alternative for the development of the SCC. As well as the quarry dust, mineral additions, i
Publicado em: 2007
-
24. Compósitos Portland-biopolímeros para cimentação de poços de petróleo
The oil production in mature areas can be improved by advanced recovery techniques. In special, steam injection reduces the viscosity of heavy oils, thus improving its flow to surrounding wells. On the other hand, the usually high temperatures and pressures involved in the process may lead to cement cracking, negatively affecting both the mechanical stabilit
Publicado em: 2006