Composite Membrane
Mostrando 13-24 de 69 artigos, teses e dissertações.
-
13. Clay nanoparticles effects on performance and morphology of poly(vinylidene fluoride) membranes
In this study, a comparison between neat poly(vinylidene fluoride) (PVDF) membrane and composite (PVDF-Nanoclay and PVDF-PVP-Nanoclay) membranes is presented. All membranes were synthesized by the phase inversion process, using 18% PVDF, n-methylpyrrolidone as solvent and water as the non-solvent. Demineralized water cross-flow permeation tests were conducte
Braz. J. Chem. Eng.. Publicado em: 2014-03
-
14. Crossflow microfiltration of sugarcane juice: effects of processing conditions and juice quality
Sugarcane juice with passion fruit pulp was clarified using microfiltration under different T (temperature), P (pressure), and V (tangential velocity). The effects of these processing parameters were evaluated applying a rotational central composite experimental design (RCCD) and response surface methodology (RSM). The tests were performed at a filtration pi
Food Sci. Technol. Publicado em: 2014-03
-
15. Oxygen air enrichment through composite membrane: application to an aerated biofilm reactor
A highly permeable composite hollow-fibre membrane developed for air separation was used in a membrane aerated biofilm reactor (MABR). The composite membrane consisted of a porous support layer covered with a thin dense film, which was responsible for oxygen enrichment of the permeate stream. Besides oxygen enrichment capability, dense membranes overcome maj
Braz. J. Chem. Eng.. Publicado em: 2013-12
-
16. Modification of PSf membrane nanostructure using different fabrication parameters and investigation of the CO2 separation properties of PDMS-coated PSf composite membranes
The effects of preparation parameters on the performance and morphology of polydimethylsiloxane/ polysulfone (PDMS/PSf) membranes were investigated. The PDMS layer is mainly used for sealing the defects of the PSf selective layer. The membrane morphologies were characterized by using scanning electron microscopy (SEM). The CO2/CH4 separation performance of m
Braz. J. Chem. Eng.. Publicado em: 2013-06
-
17. Plastic membrane, carbon paste and multiwalled carbon nanotube composite coated copper wire sensors for determination of oxeladin citrate using batch and flow injection techniques
A fabricação e as características de desempenho de três novos sensores potenciométricos para a determinação de citrato de oxeladina são descritas. Os sensores propostos incluem um sensor do tipo membrana em plástico PVC, um sensor de pasta de carbono e um sensor de fio de cobre revestido com compósito de nanotubos de carbono de parede múltiplas (M
J. Braz. Chem. Soc.. Publicado em: 2013-04
-
18. Effects of light-curing time on the cytotoxicity of a restorative composite resin on odontoblast-like cells
This in vitro study evaluated the cytotoxicity of an experimental restorative composite resin subjected to different light-curing regimens. METHODS: Forty round-shaped specimens were prepared and randomly assigned to four experimental groups (n=10), as follows: in Group 1, no light-curing; in Groups 2, 3 and 4, the composite resin specimens were light-cured
Journal of Applied Oral Science. Publicado em: 2010-10
-
19. Preparation and antibacterial activity of silver nanoparticles impregnated in bacterial cellulose
A simple method was developed to load a large amount of silver nanoparticles into bacterial cellulose (BC) produced by Gluconacetobacter xylinus in a controlled manner. Due to the high electron-rich oxygen density in the BC macromolecules and the large surface area of the BC nanoporous structure as an effective nanoreactor, the in situ direct metallization t
Polímeros. Publicado em: 05/02/2010
-
20. Desaturation - distance ratio: a new concept for a functional assessment of interstitial lung diseases
INTRODUCTION: The functional evaluation has become increasingly important in the understanding and management of patients with interstitial lung diseases. The cardiopulmonary exercise test and the six-minute walk test (6MWT), through their isolated variables, have been used to do this evaluation, with some limitations. OBJECTIVES: We proposed a new composite
Clinics. Publicado em: 2010
-
21. Concentration of lycopene from watermelon juice by membrane separation processes / Concentração de licopeno de suco de melancia através de processos de separação por membranas
Watermelon (Citrullus lanatus var lanatus) is a fruit originally from Africa which has been object of scientific interest due its high lycopene content. To increase your marketing potential the watermelon has to be processed either as a fresh single strength juice or as a concentrated or pasteurized juices or still dried in order to produce a stable powder.
Publicado em: 2009
-
22. Development of a PVAI/chitosan composite membrane compatible with the dermo-epidermic system / Desenvolvimento de membrama composta de PVAI e quitosana compatível com o sistema dermo - epidérmico
Devido à grande incidência de pessoas com lesões de pele como queimaduras e úlceras e à baixa disponibilidade de doadores, houve a necessidade de desenvolvimento de biomateriais com a capacidade de mimetizar a pele. Para o desenvolvimento desses biomateriais, polímeros são utilizados na tentativa de alcançar características mais próximas as do órg
Publicado em: 2009
-
23. Guided tissue regeneration: in vitro biocompatibility of the membrane of poly(vinylidene-trifluoroethylene)/barium titanate composite / Regeneração tecidual guiada: estudo da biocompatibilidade in vitro da membrana do compósito de poli(vinilideno-trifluoretileno)/titanato de bário
O princípio da regeneração tecidual guiada (RTG) baseia-se na utilização de membranas biocompatíveis com a finalidade de impedir a migração dos tecidos conjuntivo e epitelial para a ferida, permitindo que células do ligamento periodontal repovoem a superfície radicular e regenerem o aparato de inserção do dente. A RTG tem sido utilizada em divers
Publicado em: 2009
-
24. Modelagem e simulação da operação de um reator de leito fixo catalitico envolto em membrana permseletiva / Modeling and simulation of fixed bed reactor wrapped with permselective membranes
Styrene is an important monomer in the manufacture of thermoplastic and synthetic rubbers. Most of the production is based on the catalytic dehydrogenation of ethylbenzene. The increase of the styrene productivity can be reached using permselectives membranes for hydrogen removal, suppressing the reversible and secondary reactions. This work presents the sim
Publicado em: 2007