Composite Material
Mostrando 1-12 de 771 artigos, teses e dissertações.
-
1. Challenges of TiO2-composite, as a visible active photocatalyst material for SARS-CoV-2 antiviral compared with the other viruses
The efforts in dealing with COVID-19 in various aspects are continuously being carried out, such as the photocatalytic process. Interestingly, TiO2 plays an important role as an environmentally friendly photocatalyst with a visible and UV absorption range. The increase in the antiviral performance of this compound is further maximized by formulating TiO2-bas
Química Nova. Publicado em: 2022
-
2. Mechanical properties and fractography of cement-based composites reinforced by natural piassava and jute fibers
Abstract Today’s demand for environmentally friendly and energy-efficient solutions to the construction industry has driven researchers to match natural resources with traditional technics to develop new building technologies. However, there are literature limitations about the correlation of fiber-matrix interface with the failure of natural fibers in mor
Cerâmica. Publicado em: 2022
-
3. Per-Aqueous Liquid Chromatography for the Separation of Polar Compounds Preparation and Characterization of Poly(ethylene oxide co dimethylsiloxane) Based Stationary Phase
Poly(ethylene oxide-co-dimethylsiloxane) was thermally immobilized on silica particles-Si(PEO)-to separate small polar compounds with water-rich mobile phases. Poly(ethylene oxide-co-dimethylsiloxane) content on Si(PEO) stationary phase was optimized using a central composite design. Infrared spectroscopy, scanning electron microscopy, and thermogravimetric
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
4. OPTIMIZATION OF BREWING WASTE’S (TRUB) PHENOLIC COMPOUNDS EXTRACTION BY ULTRASOUND ASSISTED USING RESPONSE SURFACE METHODOLOGY
The brewing waste, also known as trub, is an abundant by-product of the brewing industry. Such material presents high levels of phenolic compounds, which promote antioxidant, antimicrobial and antifungal effects, turning the trub economically attractive. In this study, the trub’s phenolic compounds were extracted by ultrasound-assisted extraction technolog
Quím. Nova. Publicado em: 2021-04
-
5. Thermal decomposition and reaction sintering for synthesis of mullite-zirconia composite using kaolin, γ-alumina and zirconia
Abstract The refractory materials used in the wall of the furnaces for glass melting can be prepared from mullite-zirconia composite material. The composite of mullite/zirconia was synthesized from Iraqi kaolin, γ-alumina, and zirconia using thermal decomposition with reaction sintering at 1600 °C. Several batches were prepared with various ratios of kaoli
Cerâmica. Publicado em: 2021-03
-
6. Light Transmittance and Depth of Cure of a Bulk Fill Composite Based on the Exposure Reciprocity Law
Resumo O objetivo deste estudo foi avaliar o efeito da lei de reciprocidade de um diodo emissor de luz (LED) multi-wave na transmitância de luz (LT), profundidade de cura (DOC) e grau de conversão em profundidade (DC) de um compósito bulk fill. Material e Métodos: Um compósito bulk fill (EvoCeram®, Ivoclar Vivadent) foi fotoativado utilizando um LED mu
Braz. Dent. J.. Publicado em: 2021-02
-
7. Arsenic and Other Elements Determination in Seawater Using Coprecipitation and Standard Mode Inductively Coupled Plasma Mass Spectrometry
The present work aims the determination of As, Co, Cr, Cu, Mn and Pb in seawater samples using coprecipitation extraction procedure before standard mode inductively coupled plasma mass spectrometry (ICP-MS) (no collision/reaction cell). The coprecipitation procedure is based on the precipitation of Mg(OH)2 from the reaction of the Mg2+ ions (present into the
J. Braz. Chem. Soc.. Publicado em: 2021-01
-
8. Does Pigment Incorporation into Regular Composite Resins for Posterior Buildups Alter Their Bond Strength?
Resumo Levantes de mordida posterior são dispositivos para o tratamento ortodôntico confeccionados com resinas compostas ou materiais ionoméricos. Cuidado com a remoção destes se faz necessário para proteção da superfície dentária; para tanto, materiais pigmentados são preferidos por proporcionar melhor visualização. Este estudo propõe uma téc
Braz. Dent. J.. Publicado em: 2020-08
-
9. CELLULOSE NANOFIBERS FROM CASSAVA AGRO-INDUSTRIAL WASTE AS REINFORCEMENT IN PVA FILMS
Cellulose nanofibers (CNF) have been applied in composite systems due to the abundance of raw material, excellent mechanical and thermal properties. In this work, CNF was prepared from agroindustrial waste and used in specified amounts in polyvinyl alcohol (PVA) composites. The FTIR spectra of CNF, chemically purified cellulose (CPC) and Cassava Agro-industr
Quím. Nova. Publicado em: 2020-06
-
10. Upconversion 3D Printed Composite with Multifunctional Applications for Tissue Engineering and Photodynamic Therapy
Upconversion nanoparticles (UCNPs) are suitable materials for bioapplications due to their ability to emit visible light under near infrared (NIR) excitation, in the biological transparency range. Polycaprolactone(PCL)-based scaffolds are widely used in tissue engineering in combination with inorganic compounds to improve bioactivity and osteoconductive prop
J. Braz. Chem. Soc.. Publicado em: 2020-04
-
11. Composite floor system with CFS trussed beams, concrete slab and innovative shear connectors
Abstract Steel and concrete floor systems are widely applied for buildings and provide excellent structural response, optimized material consumption, reduced beam height, and improved bending strength and stiffness capacity. In recent years, many experimental investigations concerned with new alternatives addressed to efficient interaction between steel and
REM, Int. Eng. J.. Publicado em: 2020-03
-
12. EVALUATION OF POLY(VINYL ALCOHOL) ADDITION EFFECT ON NANOFIBRILLATED CELLULOSE FILMS CHARACTERISTICS
ABSTRACT In this study, based on the mechanical shear treatment, the cellulosic pulp was fibrillated in nanofibrils dispersed in aqueous suspension. Nanofibrillated Cellulose (NFC) matrix - Polyvinyl Alcohol (PVA) nanocomposite films’ were prepared by casting from NFC/PVA suspension mixtures. The thermal and mechanical properties of the obtained films were
CERNE. Publicado em: 2020-03