Composite Beams
Mostrando 13-24 de 86 artigos, teses e dissertações.
-
13. Free Vibration Analysis of Functionally Graded Nanocomposite Beams on Elastic Foundation Using a Mesh-Free Method
Abstract The use of Carbon Nanotubes as the reinforcing constituent for polymer matrix composites in place of conventional fibers has led to the emergence of a new generation of advanced composite materials. In this paper, the free vibration of functionally graded nanocomposite beams on elastic foundations are studied. Three different types of Carbon Nanotub
Lat. Am. j. solids struct.. Publicado em: 2017-12
-
14. On the Decreasing Flexural Modulus of Glass/Vinylester Composite Beams Up to Failure State
Abstract The comparison of the failure state for composite laminates under bending and tensile loads is a well-known issue which has been intensively discussed in the literature. The scope of the current work is to investigate the appropriate method of the flexural modulus of the composite laminates by the aid of experimental and numerical approach. The prim
Lat. Am. j. solids struct.. Publicado em: 2017-08
-
15. Non-Linear Three Dimensional Finite Elements for Composite Concrete Structures
Abstract The current investigation focused on the development of effective and suitable modelling of reinforced concrete component with and without strengthening. The modelling includes physical and constitutive models. New interface elements have been developed, while modified constitutive law have been applied and new computational algorithm is utilised. T
Lat. Am. j. solids struct.. Publicado em: 2017-03
-
16. Parametric Modal Dynamic Analysis of Steel-Concrete Composite Beams with Deformable Shear Connection
Abstract Composite structural elements of steel-concrete began to be used only in 1960 after the development of methods and constructive dispositions that ensured the functionality of these two materials together. In order to verify the importance of the participation of the axial mode in the frequency spectrum of the free vibration problem in composite beam
Lat. Am. j. solids struct.. Publicado em: 2017-02
-
17. Influence of nails size and layout to obtain the reduction coefficient of moment of inertia for timber beams with composite cross section
ABSTRACT A significant portion of rural building’s roof is supported by timber trusses. Increasing distance between the trusses can be achieved by using composite cross sections ("T" and "I") for beams. With this, it is possible to reduce the number of columns and trusses, bringing significant savings in material and the desired cost reduction, mainly usin
Eng. Agríc.. Publicado em: 2016-08
-
18. Water interaction and bond strength to dentin of dye-labelled adhesive as a function of the addition of rhodamine B
ABSTRACT Objective This study investigated the effect of the fluorescent dye rhodamine B (RB) for interfacial micromorphology analysis of dental composite restorations on water sorption/solubility (WS/WSL) and microtensile bond strength to dentin (µTBS) of a 3-step total etch and a 2-step self-etch adhesive system. Material and Methods The adhesives Adp
J. Appl. Oral Sci.. Publicado em: 2016-08
-
19. Geometrically nonlinear analysis of thin-walled laminated composite beams
Abstract The use of thin-walled composite beams in Engineering has attracted great interest in recent years. Composite beams and other structural elements tend to have thin walls due to the high strength of the material. Other important aspect is that, even without reaching large strains and without overcoming the elastic limit of the material, such as beams
Lat. Am. j. solids struct.. Publicado em: 2015-11
-
20. Multi-model finite element scheme for static and free vibration analyses of composite laminated beams
Abstract A transition element is developed for the local global analysis of laminated composite beams. It bridges one part of the domain modelled with a higher order theory and other with a 2D mixed layerwise theory (LWT) used at critical zone of the domain. The use of developed transition element makes the analysis for interlaminar stresses possible with si
Lat. Am. j. solids struct.. Publicado em: 2015-11
-
21. Stress Analysis of Laminated Composite and Sandwich Beams using a Novel Shear and Normal Deformation Theory
AbstractA novel Normal and Shear Deformation Theory (NSDT) for analysis of laminated composite and sandwich beams, taking into account shear deformation as well as normal deformation, is developed. The paper investigates flexural behaviors of thick laminated and sandwich beams under plane stress conditions using NSDT. A generalized displacement-based refined
Lat. Am. j. solids struct.. Publicado em: 2015-07
-
22. Análise da viabilidade econômica do projeto estrutural de edifícios de múltiplos andares com estrutura de aço / Analysis of the economic viability of the structural design of multi-story buildings with steel structures
O presente estudo traz uma revisão bibliográfica dos sistemas estruturais, da estabilidade e análise estrutural de edifícios de múltiplos andares com estrutura de aço e, ainda, do emprego de elementos mistos aço e concreto nesses sistemas, com ênfase às vigas mistas. É aplicável a duas áreas, a saber: acadêmica e prática. Na área acadêmica, c
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 20/08/2012
-
23. Contribuição ao estudo da estabilidade de edifícios de andares múltiplos em aço / Contribution to the study of stability of steel multi-storey buildings
This work presents a comparative analysis of different structural systems for a 20-storey building. Each model has been designed using the principles of the direct analysis method (DAM), present in the ABNT NBR 8800:2008. The first-order amplification method (FOAM) was used to obtain, in a simplified manner, the forces acting on the building elements, includ
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 20/08/2012
-
24. Modelos numéricos de vigas mistas de aço e concreto pertencentes a sistemas de pisos mistos de pequena altura em situação de incêndio / Numerical modelling of composite slim floor beams in fire
Slim floor frames consists on structural system in which the steel beam is completely or partially inserted in a concrete slab, that is usually used in profiled steel decks systems. The main goal of the slim floor systems is to obtain a minimum height of the composite beam section and, consequently, achieve a higher height of the floor or a lower total heigh
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 08/03/2012