Compatibilizer Agent
Mostrando 1-12 de 23 artigos, teses e dissertações.
-
1. Avaliação do efeito do agente compatibilizante (PP-g-MA) em misturas PP/Amido termoplástico
RESUMO O crescente desperdício de materiais plásticos no meio ambiente juntamente com a preocupação com a futura escassez do petróleo tem aumentado o interesse por polímeros biodegradáveis, como o amido. Nos últimos anos, o amido tem sido utilizado em misturas com diferentes polímeros sintéticos. Essas misturas têm sido compatibilizadas por meio d
Matéria (Rio J.). Publicado em: 16/09/2019
-
2. Compatibility and characterization of Bio-PE/PCL blends
Abstract In this work, blends based on environmentally friend polymers such as Biopolyethylene (Bio-PE), Polycaprolactone (PCL) and Polyethylene graft maleic anhydride (PEgMA) added as compatibilizer agent were produced by conventional extrusion, aiming to produce bio-blends with synergic properties at low processing cost, being at same time non-polluting an
Polímeros. Publicado em: 10/06/2019
-
3. THE MULTIROLE OF MODIFIED NATURAL GUMS FOR MULTICOMPONENT POLYMERS: AS COUPLING AGENTS FOR POLYMERS REINFORCED WITH CELLULOSIC FIBERS OR COMPATIBILIZERS FOR BIODEGRADABLE POLYMER BLENDS
In this work, the capability to use pine rosin as a biodegradable coupling agent/compatibilizer is studied. To formulate composites, post-consumer polypropylene and discarded agave fibers (as reinforcing agent) are coupled with pine rosin (in pure or maleated form). Besides, poly(lactic acid) (PLA) with poly(butylene adipate-co-terephthalate) (PBAT) are comp
Quím. Nova. Publicado em: 02/05/2019
-
4. Effects of Rotor Speed on Peroxide/Bismaleimide Cured Polypropylene/Nitrile Rubber Thermoplastic Vulcanizates (TPVs)
Elastomer thermoplastics are a class of polymeric materials that received industry attention due to the possibility of joining the elastic of elastomers with the thermoplastics processability. The synergistic properties are linked to the appropriate processing. This study evaluated the effect of rotor speed during polymer mixing and the dynamic vulcanization
Mat. Res.. Publicado em: 09/08/2018
-
5. Hyperbranched polyester polyol modified with polylactic acid as a compatibilizer for plasticized tapioca starch/polylactic acid blends
Abstract A hyperbranched polyester polyol of the second generation (HBP2) was modified with polylactic acid (HBP2-g-PLA) and employed as a compatibilizer for plasticized tapioca starch (TPS)/polylactic acid (PLA) blends. The effect of the compatibilizer HBP2- g-PLA was evaluated in comparison to the control sample (TPS/PLA blend without HBP2-g-PLA). The tor
Polímeros. Publicado em: 15/03/2018
-
6. Effect of PANI on Thermal, Mechanical and Electromagnetic Properties of HDPE/LLDPE/PANI Composites
In this work, polyaniline (PANI) in emeraldine-base form, synthesized by chemical oxidation polymerization, was protonated with hydrochloric acid (HCl). Composites based on high-density polyethylene (HDPE) and linear-low density polyethylene (LLDPE) blends with PANI were prepared in molten condition using a torque rheometer. The effect of compatibilizer agen
Mat. Res.. Publicado em: 11/12/2017
-
7. Effect of an Organo-Modified Montmorillonite on the Barrier Properties of PET Nanocomposites Using a Polyester Ionomer as a Compatibilizing Agent
Poly(ethylene terephthalate)/organically modified montmorillonite (PET/o-Mt) nanocomposites were prepared via melt intercalation in a twin-screw extruder using a polyester ionomer (PETi) as compatibilizer. The o-Mt content used was 0, 1, 3 or 5 wt% and the compatibilizer/o-Mt mass ratio was 0/1, 1/1 or 3/1. The main objective was to study the effects of the
Mat. Res.. Publicado em: 09/05/2017
-
8. Effect of compatibilization in situ on PA/SEBS blends
Abstract This paper presents the mechanical, thermal and rheological properties of polymer blends of polyamide 6 (PA) and styrene-butylene-styrene (SEBS) using SEBS-g-MA as a coupling agent. The increase in the interfacial interaction of PA/SEBS blends with the addition of SEBS-g-MA was observed to enhance the mechanical properties studied (excellent elongat
Polímeros. Publicado em: 16/06/2016
-
9. Preparation and Characterization of Maleic Anhydride Grafted Poly(Hydroxybutirate-CO-Hydroxyvalerate) – PHBV-g-MA
A compatibilizer agent was successfully produced by grafting maleic anhydride (MA) to poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) chains on a reactive processing by mechanical mixing, using a mixture of PHBV, MA and dicumyl peroxide (DCP) as initiator. The resulting PHBV grafted MA (PHBV-g-MA) was characterized by Fourier transform infrared (FTIR) spectr
Mat. Res.. Publicado em: 12/02/2016
-
10. Influence of coupling agent in compatibility of post-consumer HDPE in thermoplastic composites reinforced with eucalyptus fiber
This study investigates the feasibility of using recycled high density polyethylene (HDPE) and wood fiber from species Eucalyptus grandis (EU) to manufacture experimental composite panels. The use of maleated polyethylene as coupling agent (CA) improved the compatibility between the fiber and plastic matrix. The mechanical properties of the resultant composi
Mat. Res.. Publicado em: 25/03/2014
-
11. Thermoplastic elastomers blends based on linear low density polyethylene, ethylene-1-octene copolymers and ground rubber tire
Blends of linear low density polyethylene (LLDPE) ethylene-1-octene copolymers (EOC), with different 1-octene (OC) content, and ground rubber tire (GRT) were prepared by melt mixing in a twin screw extruder. Five different compositions of LLDPE/EOC/GRT blends were processed in the extruder to evaluate the effect of EOC addition to the LLDPE/GRT blends. The a
Polímeros. Publicado em: 2014
-
12. Development of Polyamide 6/Compound by Recycled Rubber Blends Using Graphitized Polyethylene or Polypropylene with Maleic Anhydride as Compatibilizer Agent
ABSTRACT: The toughening of polyamide 6 is desirable for many applications and may be obtained by adding a phase to the elastomeric matrix. However, this leads to a loss in its rigidity characteristics. Therefore, this study aimed at developing blends of polyamide 6/compound by recycled rubber (SBR-R), with the addition of compatibilizer graphitized polyethy
J. Aerosp. Technol. Manag.. Publicado em: 2013-06