Combustion
Mostrando 13-24 de 596 artigos, teses e dissertações.
-
13. DETERMINATION OF REACTIVITY AND THERMODYNAMIC ANALYSIS OF NICKEL-BASED OXYGEN CARRIERS FOR CHEMICAL-LOOPING COMBUSTION
Abstract This work aimed to study nickel-based oxygen carriers (OC) for Chemical Looping Combustion (CLC) using H2 and CH4 as fuel. The reactivity and reaction kinetics of the OC were investigated, applying the shrinking core, nucleation and diffusion models in three dimensions, as well as whether the OC is thermodynamically favorable for the reaction. The r
Braz. J. Chem. Eng.. Publicado em: 09/12/2019
-
14. Verification of the reaction to fire of water-based and oil-based enamel paints used as finish of walls in residential buildings
ABSTRACT Among that materials whose behavior facing fire has not yet been understood thoroughly lie paints used as finish of interior and exterior walls of buildings. This study aimed to analyses the reaction to fire of enamel paints exposed to elevated temperatures, so two paints were tested: one water-based and one oil-based, both applied over a white unde
Matéria (Rio J.). Publicado em: 25/11/2019
-
15. Converting a Conventional Vehicle into an Electric Vehicle (EV)
Abstract The electric vehicle (EV) is not a recent invention. Between the end of the XIX century and the beginning of the XX century, most motor vehicles were electric, due to their superior reliability and cleanliness, compared to that of vehicles driven by internal combustion engines (ICE). However, with the development of ICEs and the reduction of their p
Braz. arch. biol. technol.. Publicado em: 25/11/2019
-
16. Preparation and characterization of yttria stabilized zirconia (YSZ) films deposited by dip-coating on LSM-YSZ substrate with different proportions
ABSTRACT In this work, sol-gel/dip-coating process for obtaining yttria stabilized zirconia (YSZ, ZrO2–8% Y2O3) films deposited onto LSM-YSZ (lanthanum strontium manganite (LSM, La0.7Sr0.3MnO3) mixed with YSZ) with different proportions (20/80, 50/50, 80/20) was investigated. The films were deposited on substrate varying the number of layers deposited. LSM
Matéria (Rio J.). Publicado em: 25/11/2019
-
17. Lightweight high-strength concrete with the use of waste cenosphere as fine aggregate
RESUMO Cenosfera é um sub-produto da combustão do carvão que apresenta interessantes propriedades para ser usado na produção de materiais cimentícios, tais como estrutura oca, baixa densidade, baixa térmica condutividade e notável estabilidade térmica. Além disso, ela mostra reatividade pozolânica na cura térmica. Entretanto, o potencial da cenos
Matéria (Rio J.). Publicado em: 25/11/2019
-
18. Análise do processo de dessalinização solar com ênfase no método de umidificação e desumidificação
RESUMO A falta de água é um problema que afeta muitas regiões do nosso planeta, especialmente ilhas e locais de clima muito seco. Especialistas dizem que essa situação irá se agravar e que, em 2025, cerca de 1,8 bilhão de pessoas sofrerão com essa escassez. Embora métodos tradicionais de dessalinização sejam alternativas bem conhecidas e implantad
Eng. Sanit. Ambient.. Publicado em: 25/11/2019
-
19. Halogen Determination in Polymeric Waste of Electrical and Electronic Equipment: Overcoming Limitations in Sample Preparation
Sample preparation of polymers for halogen determination requires special attention because they are difficult to bring into solution and due to the risk of analyte losses when using acid digestion. A method using microwave-induced combustion (MIC) was optimized for accurate determination of halogens in polymeric parts obtained in waste of electrical and ele
J. Braz. Chem. Soc.. Publicado em: 24/10/2019
-
20. Chlorine and Fluorine Determination in Eye-Pencil: Development of an Eco-Friendly Sample Preparation Method for Ion Chromatography Analysis
In this paper, a feasible method was proposed for the chlorine and fluorine determination in eye-pencil samples using ion chromatography (IC). The microwave-induced combustion (MIC) was used to digest up to 200 mg of a sample, with 50 mg of microcrystalline cellulose as a combustion aid and only water for analytes absorption. Cl and F recoveries were 105 ±
J. Braz. Chem. Soc.. Publicado em: 21/10/2019
-
21. Nanoparticles of Ni1-x Znx Fe2 O4 used as Microwave Absorbers in the X-band
Ferrites nanoparticles of Ni1-xZnxFe2O4 ferrites with x varying between 0 and 1, in steps of 0.2, were obtained by solution combustion synthesis (SCS) and dispersed in oil paint at the concentrations of 10, 20, 30 and 40% by ferrite weight of ferrite, with the aim of producing electromagnetic wave absorbing composites, in the X band (8-12 GHz). The ferrite p
Mat. Res.. Publicado em: 21/10/2019
-
22. Phase Separation and Development of the Microstructure for Stainless Steel to Copper Alloy Weld Joints Using a Fiber Laser
ABSTRACT Stainless steel and copper alloys joints are often applied in aerospace, marine and power industries where both high thermal and electrical conductivity (Cu) and corrosion resistance (steel) are required. In the aerospace industry, in particular for the combustion chamber of rocket engines, copper and steel combinations offer perfect materials selec
J. Aerosp. Technol. Manag.. Publicado em: 10/10/2019
-
23. Simulação computacional de dispositivos de mistura em câmara de combustão para gases de carbonização
Resumo O carvão vegetal proveniente de florestas plantadas é uma fonte de energia renovável utilizada na siderurgia do Brasil, todavia, em sua produção há liberação do gás de pirólise, que pode ser considerado um gás com baixo poder calorífico inferior. A sustentabilidade da produção de carvão vegetal tem demandado a queima destes gases, poden
Ciênc. Florest.. Publicado em: 30/09/2019
-
24. THERMAL BEHAVIOR OF FOREST BIOMASS WASTES PRODUCED DURING COMBUSTION IN A BOILER SYSTEM
RESUMO Durante a queima da biomassa em sistemas industriais haverá a formação de resíduos contendo cinzas e carbono residual, cujo teor será variável em função da eficiência e dos parâmetros de operação das câmaras de combustão. A caracterização destes resíduos é ferramenta essencial para visualizar a sua potencialidade de reuso energético
Rev. Árvore. Publicado em: 23/09/2019