Coated Paper
Mostrando 1-12 de 60 artigos, teses e dissertações.
-
1. Inhibitory Effects of the Lipophilic Extracts and An Isolated Meroditerpene of Brown Alga in Pasture Weeds in the Eastern Amazon Region
RESUMO: Dois extratos lipofílicos e o ácido atomárico (1), um produto natural isolado, foram obtidos da alga parda marinha Stypopodium zonale (Dictyotaceae) para identificar e caracterizar seus potenciais efeitos inibitórios na germinação de sementes e no alongamento de radícula e do hipocótilo das plantas daninhas Mimosa pudica e Senna obtusifolia.
Planta daninha. Publicado em: 04/11/2019
-
2. Determinação de designer drugs em saliva por paper spray mass spectrometry
Determination of two drugs of abuse in saliva has been performed by Paper Spray Ionization Mass Spectrometry (PSI-MS) using a Molecularly Imprinted Polymer (MIP) coated paper as substrate. The method has been optimized for quantification of 3,4-methylenedioxy- N-methylamphetamine (MDMA) and methamphetamine, 3,4-methylenedioxyamphetamine (MDA) from synthetic
Quím. Nova. Publicado em: 15/08/2019
-
3. Efeito da mesogeometria da broca e das condições de lubrirrefrigeração sobre o acabamento do furo em aço ARBL DIN S700MC
RESUMO O trabalho apresenta um estudo sobre os efeitos decorrentes da modificação da mesogeometria de uma broca helicoidal de metal-duro com revestimento de TiAlN sobre o acabamento superficial do aço de alta resistência e baixa liga DIN S700MC utilizando diferentes condições de aplicação de fluidos lubrirrefrigerantes (em abundância, em mínima qua
Matéria (Rio J.). Publicado em: 20/05/2019
-
4. Graphene Oxides Coated Paper as a Substrate to Paper Spray Ionization Mass Spectrometry for Creatinine Determination in Urine Samples
Paper spray ionization (PSI) is a promising analytical tool for direct analysis in mass spectrometry (MS). However, this technique usually uses chromatographic paper, which rarely accomplishes a stable MS signal and could vary with the sample matrix effect. In the present study, the application of graphene oxides (GO) was scrutinized as modifier paper substr
J. Braz. Chem. Soc.. Publicado em: 08/04/2019
-
5. An Investigation on Surface Roughness and Tool Wear in Turning Operation of Inconel 718
ABSTRACT: This paper investigates the influences of three different input parameters, such as feed rate, insert nose radius, and insert coating methods, in the turning operation of Inconel 718. The coating methods were selected as medium temperature chemical vapor deposition (MT-CVD) and physical vapor deposition (PVD) and in addition to coating methods, the
J. Aerosp. Technol. Manag.. Publicado em: 25/02/2019
-
6. Preparation and characterization of alginate and gelatin microcapsules containing Lactobacillus rhamnosus
ABSTRACT This paper describes the preparation and characterization of alginate beads coated with gelatin and containing Lactobacillus rhamnosus. Capsules were obtained by extrusion method using CaCl2 as cross linker. An experimental design was performed using alginate and gelatin concentrations as the variables investigated, while the response variable was t
An. Acad. Bras. Ciênc.. Publicado em: 31/08/2017
-
7. Study of the Nanostructure Effect on Polyalkylthiophene Derivatives Films Using Impedance Spectroscopy
In this paper, devices fabricated with a diode-like structure (electrode/polymer/electrode) from spin-coated and nanostructured (Langmuir-Schaefer) films of polythiophene derivatives were characterized by impedance spectroscopy and studied by theoretical fitting to reach a better understanding of the physical processes in the devices. The materials used for
Mat. Res.. Publicado em: 20/03/2017
-
8. Evaluación del Deterioro de los Electrodos al Incrementar el Número de Pulsos del Tiempo de Soldadura en Aceros IF y HSLA Galvanizados y la Afectación de las Propiedades Mecánicas en los Puntos de Soldadura
Abstract: Resistance welding points, is the most important method in the assembly industry of unibody because of its automation, which is defined as the ability of the structure to provide adequate protection to passengers against injury from a collision, mainly depends on the mechanical performance of the weld nugget. To extend the life of vehicles produced
Soldag. insp.. Publicado em: 05/01/2017
-
9. A Model for Homogenization of Linear Viscoelastic Periodic Composite Materials with Imperfect Interface
Abstract In this paper, a micromechanical extension of the finite-volume direct averaging micromechanics theory (FVDAM) is presented for evaluation of the homogenized relaxation moduli of linear viscoelastic unidirectional fiber reinforced composites with periodic microstructures. Such materials are assumed as composed of repeating unit cell with arbitrary i
Lat. Am. j. solids struct.. Publicado em: 2016
-
10. Effect of Processing on Microstructure and Corrosion Mitigating Properties of Hydrotalcite Coatings on AA 6061 Alloy
Pitting corrosion of the aluminium cladding of spent nuclear fuels stored in light water pools has been observed. To prevent this, coating of the Al cladding with hydrotalcite (HTC) was proposed. This paper presents the effect of chemical bath and processing parameters on microstructure and corrosion behavior of HTC coatings on alloy AA 6061 specimens. The H
Mat. Res.. Publicado em: 03/11/2015
-
11. Effect of Low Temperature Nitriding of 100Cr6 Substrates on TiN Coatings Deposited by IBAD
In this paper we studied the influence of pre-treating the surface of 100Cr6 steel by ion beam nitriding at low temperature (380°C) on the surface topography and wear resistance of thin TiN coatings deposited by reactive ion beam assisted deposition. The specimens were characterized by grazing incidence X-ray diffraction, scanning electron microscopy and at
Mat. Res.. Publicado em: 2015-02
-
12. A model for evaluation of effective thermal conductivity of periodic composites with poorly conducting interfaces
This paper presents a new micromechanical extension of the parametric finite-volume theory for evaluation of effective thermal conductivities of periodic unidirectional fiber reinforced composites. Such materials are assumed as composed of repeating unit cells with arbitrary internal architectural arrangements of fiber coated by thin interphase with low ther
Mat. Res.. Publicado em: 11/11/2014